Brakes
Calipers, rotors, pads, braided lines, and master cylinders. Stopping distance is the cheapest performance upgrade on an electric dirt bike.
Verified Fit
Warp 9 Surron Ultra Bee Titanium Brake Pad Pins
Verified FitUltra Bee Upgraded Brake Kit
Verified Fit240MM Thick Upgraded Rotor
TALARIA X3 FOOTBRAKE 
Brakes before power, and how to bed pads properly
Everyone upgrades the motor first. Then they find out the stock brakes were sized for the stock bike. Here is the order...
Read the guide →
Verified FitUltra Bee Brake Kit (Suron, Eride)
Verified FitWarp 9 E-Moto Front Brake Rotor Adapter
Fitment Database
Every platform we carry parts for, and exactly what is verified against each frame. Check before you buy, not after.
Check my bike →
Verified Fit
Ultra Bee Brake Kit (Talaria X3, mx3, mx4)
Verified FitULTRA BEE FOOTBRAKE
Verified Fit
Verified FitDirtyBike Surron Ultra Bee Hard Enduro Brake Disk Rotor
Warp 9 E-Ride Pro 3.0/SR Rotors
Verified FitWarp 9 Emoto Rotors - Front
Verified FitDirtyBike Surron Ultra Bee Sintered Brake Pads
Verified Fit
HEYBIKE FOOTBRAKE KIT
Verified Fit
Ultra bee Brake Caliper Bracket
Verified FitWarp 9 Emoto Rotors - Rear
Warp 9 Husky 220mm Rear Fixed Rotor
Verified FitBrake Kit Fit Ultra Bee E-Bike
Verified FitSurron lbx ultra bee brake kit
Talaria x3 ultra bee brake kit
Verified FitBrake Accessories for Talaria Sting MX3 MX4
Three stages of stopping
Everyone upgrades the motor first. Then they find out the stock brakes were sized for the stock motor. Here is the order that actually works.
Pads and fluid
Ten-minute jobThe cheapest real improvement on any e-moto. Sintered pads bite harder and survive heat that eats organic compounds. Bed them in properly or you have wasted the money — twenty medium stops from 20 mph, no dragging.
- Job time 10 MINUTES
- Tools HEX KEYS
- Wear item YES
- Do it FIRST
In this tier: Brake pads, brake fluid
Shop padsRotors and lines
An afternoonWarped or undersized rotors throw away everything the pads gave you. Braided lines remove the sponge from the lever, which is what makes a brake feel controllable rather than just powerful.
- Job time 1 TO 2 HOURS
- Tools BLEED KIT
- Bleed required YES
- Do it SECOND
In this tier: Rotors, braided lines
Shop rotors and linesCalipers and masters
Full systemFour-piston calipers and a matched master cylinder. Real motorcycle hardware, and worth it once the bike is making genuine power. Doing this before stages 1 and 2 is buying a fix for a problem you have not diagnosed.
- Job time HALF A DAY
- Tools FULL BLEED KIT
- Bleed required YES
- Do it LAST
In this tier: Calipers, master cylinders
Shop calipersBrakes are frame-specific
Caliper mounts, rotor diameters and master cylinder bores vary between platforms that otherwise look identical. Filter to your bike before you order — a rotor that fouls the caliper is the most common wrong-part return in this category.
Find parts for my bikeFour things about e-moto brakes
Pad compound
Organic pads are quiet and gentle on rotors and fade badly under repeated hard stops. Sintered pads bite harder, survive heat and wear rotors faster. On a heavy e-moto with instant torque, sintered is usually the right answer.
Bedding in
A new pad has to transfer a film of material onto the rotor before it works properly. Skip bedding and the brake feels worse than the one you replaced, which is why so many pad upgrades get returned as faulty.
Leverage, not grip
A bigger rotor does not grip harder, it gives the caliper more leverage. That is why going up a rotor size often beats going up a pad compound — and why it is limited by what the caliper mount will take.
Why e-motos eat brakes
These bikes are heavy and make torque from zero, so they arrive at the corner faster and carry more mass into it than the frame's donor bicycle ever did. Brake wear is a function of kinetic energy, and kinetic energy scales with mass.
Brakes questions, answered
Which pads should I buy?
How do I bed in new pads?
Do I need to bleed the brakes?
Why do my brakes fade on long descents?
How do I know a part fits my bike?
What if it does not fit?
About Brakes
Everyone upgrades the motor first, then finds out the stock brakes were sized for the stock bike. On a Surron Light Bee X or Talaria Sting R the order that actually works is protection, then brakes, then power.
Where the mush comes from. Stock rubber brake lines swell under pressure; that is the vague feel at the lever. Braided stainless lines do not swell, and on the Light Bee X they cut lever flex by about 40% on their own. A four-piston front caliper with a braided line bolts to the stock radial mount with no adapter and turns the lever into something you can trust downhill.
After install. The 20 minutes you spend bedding new pads decide how well they ever work. The bedding guide walks through it. Every part on this page shows its verified fitment per bike; the DOT 4 fluid spec and rotor sizes are in the product specs.
