Brakes
for Talaria Sting MX4
Brakes verified to fit the Talaria Sting MX4 . Every part below carries the TMX4 fitment tag, checked before it ships. See everything for the Talaria Sting MX4.
Verified Fit240MM Thick Upgraded Rotor
Verified FitUltra Bee Brake Kit (Talaria X3, mx3, mx4)
Verified FitWarp 9 Emoto Rotors - Front
Verified FitWarp 9 Emoto Rotors - Rear
Brakes before power, and how to bed pads properly
Everyone upgrades the motor first. Then they find out the stock brakes were sized for the stock bike. Here is the order...
Read the guide →
Verified FitBrake Accessories for Talaria Sting MX3 MX4
Verified FitBrake Pads for Talaria Sting MX3 MX4
Verified FitBrake Pads for Talaria Sting X3 MX3 MX4
Verified FitFont Brake Disc Fit Talaria MX3 MX4
Gearing Calculator
Pick a sprocket combo and see top speed, torque change and chain length before you spend anything.
Run your numbers →
Verified FitWarp 9 E-Moto Titanium Rotor Bolts
Verified FitWarp 9 E-Moto Titanium Rotor Bolts - Talaria
Verified FitFoot Brake Lever kit Fit Talaria MX3 MX4 MX5
Verified FitDirtyBike Surron LBX Talaria Sting Break-Away Folding Aluminum Brake Lever Set
Verified FitBrake Disc Guard for Sur-Ron Talaria Segway
Verified FitWarp 9 FastAce Triple Clamps
Verified FitWarp 9 V3 Rotor Hub Spacer
Verified FitWarp 9 Formula Brake Levers
Verified FitWarp 9 Surron / Talaria Boost Spacer front Rotor Bolts
Verified FitBrake And Clutch Lever for Talaria Sting MX4
Brake Lever for Sur-Ron
Verified FitRear Brake Disc for Talaria X3 MX3
Verified FitWarp 9 Surron/Talaria 220mm Caliper Adapter Spacer Kit
Verified FitTalaria Sting MX3 MX4 Rear & Front Brake Cylinder
Verified FitWarp 9 FastAce Suspension Bundle
DirtyBike Caliper Spacer Adaptor Kit for 220mm Front Brake Rotor
Brakes questions, answered
Which pads should I buy?
How do I bed in new pads?
Do I need to bleed the brakes?
Why do my brakes fade on long descents?
How do I know a part fits my bike?
What if it does not fit?
About Brakes
Everyone upgrades the motor first, then finds out the stock brakes were sized for the stock bike. On a Surron Light Bee X or Talaria Sting R the order that actually works is protection, then brakes, then power.
Where the mush comes from. Stock rubber brake lines swell under pressure; that is the vague feel at the lever. Braided stainless lines do not swell, and on the Light Bee X they cut lever flex by about 40% on their own. A four-piston front caliper with a braided line bolts to the stock radial mount with no adapter and turns the lever into something you can trust downhill.
After install. The 20 minutes you spend bedding new pads decide how well they ever work. The bedding guide walks through it. Every part on this page shows its verified fitment per bike; the DOT 4 fluid spec and rotor sizes are in the product specs.
