Brakes
for Surron Light Bee X
Brakes verified to fit the Surron Light Bee X (60V 38.5Ah). Every part below carries the SLBX fitment tag, checked before it ships. See everything for the Surron Light Bee X.
Verified Fit240MM Thick Upgraded Rotor
Verified FitUltra Bee Brake Kit (Suron, Eride)
Verified FitWarp 9 E-Moto Front Brake Rotor Adapter
Verified FitWarp 9 Emoto Rotors - Front
Brakes before power, and how to bed pads properly
Everyone upgrades the motor first. Then they find out the stock brakes were sized for the stock bike. Here is the order...
Read the guide →
Verified FitWarp 9 Emoto Rotors - Rear
Verified FitSurron lbx ultra bee brake kit
Verified FitUltra Bee Brake Reservoir Cap
Verified FitGearing Calculator
Pick a sprocket combo and see top speed, torque change and chain length before you spend anything.
Run your numbers →
Verified FitWarp 9 E-Moto Titanium Rotor Bolts - Surron
Verified FitDirtyBike Surron LBX Talaria Sting Break-Away Folding Aluminum Brake Lever Set
Verified FitBrake Disc Guard for Sur-Ron Talaria Segway
Verified FitWarp 9 FastAce Triple Clamps
Verified FitWarp 9 V3 Rotor Hub Spacer
Verified FitRear Disc Brake Guard for Sur-Ron Segway
Verified FitWarp 9 Formula Brake Levers
Verified FitWarp 9 Surron / Talaria Boost Spacer front Rotor Bolts
Brake Lever for Sur-Ron
Verified FitBrake Levers Aluminum for Sur-Ron Light Bee
Verified FitBrake Levers for Sur-Ron Light Bee
Verified FitBrake Pads for Sur-Ron Light Bee S X
Verified FitFront Brake Disc for Sur-Ron
Verified FitRear And Front Brake Cylinder for Sur-Ron SEGWAY
Verified FitRear Brake Disc Steel for Sur-Ron
Verified FitWarp 9 Surron/Talaria 220mm Caliper Adapter Spacer Kit
Brakes questions, answered
Which pads should I buy?
How do I bed in new pads?
Do I need to bleed the brakes?
Why do my brakes fade on long descents?
How do I know a part fits my bike?
What if it does not fit?
About Brakes
Everyone upgrades the motor first, then finds out the stock brakes were sized for the stock bike. On a Surron Light Bee X or Talaria Sting R the order that actually works is protection, then brakes, then power.
Where the mush comes from. Stock rubber brake lines swell under pressure; that is the vague feel at the lever. Braided stainless lines do not swell, and on the Light Bee X they cut lever flex by about 40% on their own. A four-piston front caliper with a braided line bolts to the stock radial mount with no adapter and turns the lever into something you can trust downhill.
After install. The 20 minutes you spend bedding new pads decide how well they ever work. The bedding guide walks through it. Every part on this page shows its verified fitment per bike; the DOT 4 fluid spec and rotor sizes are in the product specs.
