MONSTE98

Suspension
for MotoTec Mud Monster 98cc Go Kart

Suspension verified to fit the MotoTec Mud Monster 98cc Go Kart . Every part below carries the MONSTE98 fitment tag, checked before it ships. See everything for the MotoTec Mud Monster 98cc Go Kart.

Suspension
MotoTec Mud Monster Foot Peg Spring Verified Fit
MotoTecSuspension

MotoTec Mud Monster Foot Peg Spring

Fits your bike
monste98
$2.99
MotoTec Mud Monster Front Shock Verified Fit
MotoTecSuspension

MotoTec Mud Monster Front Shock

Fits your bike
monste98
$19.99
MotoTec Mud Monster Front Swing Arm Red Verified Fit
MotoTecSuspension

MotoTec Mud Monster Front Swing Arm Red

Fits your bike
monste98
$39.99
MotoTec Mud Monster Rear Shock Verified Fit
MotoTecSuspension

MotoTec Mud Monster Rear Shock

Fits your bike
monste98
$19.99
Ultra Bee suspension setup by rider weight
Fits: SUB · 9 min

Ultra Bee suspension setup by rider weight

Sag first, clickers second, and a starting point for riders from 130 to 220 lbs. Most bikes we see are set up...

Read the guide →
MotoTec Mud Monster Front Swing Arm Blue Verified Fit
MotoTecSuspension

MotoTec Mud Monster Front Swing Arm Blue

Fits your bike
monste98
$39.99
MotoTec Mud Monster Front Swing Arm Black Verified Fit
MotoTecSuspension

MotoTec Mud Monster Front Swing Arm Black

Fits your bike
monste98
$39.99
MotoTec Mud Monster Front Swing Arm Green Verified Fit
MotoTecSuspension

MotoTec Mud Monster Front Swing Arm Green

Fits your bike
monste98
$39.99

Suspension questions, answered

How do I set sag?
Measure from the axle to a fixed point on the frame with the wheel off the ground, then again with you on the bike in full riding gear, feet on the pegs, someone steadying you. The difference should be roughly a third of total travel. Adjust preload to get there. If you run out of preload adjustment, you need a different spring.
My suspension bottoms out. Do I need stiffer damping?
Probably not — you likely need a stiffer spring. Compression damping controls the speed of the movement, not how much load it can hold. Winding compression in to stop bottoming makes the ride harsh everywhere else.
What is packing down?
Rebound set too slow. Over a series of quick hits the suspension does not have time to extend before the next one, so it progressively runs out of travel and the bike feels like it is sinking. Speed the rebound up.
How do I know a part fits my bike?
Every part carries a fitment code and we check it against a compatibility database before listing it. Filter any collection to your bike, or email a photo of your frame plate to hello@motorhabit.com and we will answer within 24 hours.
What if it does not fit?
Send it back. 14 days to start a return on any part, no restocking fee, uninstalled and in its original packaging with the hardware bag unopened. If our fitment data was wrong, we cover the return shipping too — that one is on us, not you.

About Suspension

Most electric dirt bikes leave the factory set up for nobody: stock clickers, stock preload, and a rider who never checked either. Suspension is the upgrade people do last and wish they had done first.

Front. A cartridge kit replaces the damper-rod internals of the Light Bee X fork with a real cartridge: 24 clicks of compression, valved for riders between 130 and 220 lb. Rear. A piggyback shock with rebound and preload adjustment and a spring rate you can actually match to your weight, 265 mm eye to eye for the Light Bee X.

Set sag first, clickers second. The setup-by-rider-weight guide gives starting points, and every part here shows which bikes it is verified for.

Set it up before you spend.

Free US shipping over $99. Every part names the frames it fits.

Shop suspension