Warp 9 Talaria MX5 Rear Axle Kit

A rear axle and axle block kit for the Talaria Sting MX5, built around two specific faults in the original setup: the stock axle is too short to fully engage the axle block on the nut side, and the block bore is oversized, which lets the axle move inside it.

The Warp 9 axle is longer than stock and pairs with billet blocks bored to match the axle diameter. The axle is keyed to the block, so it cannot rotate and the wheel can come out with a single 17mm socket. The blocks carry machined locating steps that sit against the ridges cast into the original swingarm, which improves alignment and cuts movement under load. Recheck chain tension after the first ride.