{"title":"Heybike Villain","description":"\u003cp\u003e\u003cstrong\u003eOne page for the Villain.\u003c\/strong\u003e The Heybike Villain (V1) electric dirt bike itself, from an authorized Heybike dealer, plus more than 40 parts and upgrades for it. The parts cover the whole bike: upper and lower body panels (left, right and black sets), front and rear fenders and an upgraded front fender, front and rear wheels, front and rear disc brake calipers and rotors, a handlebar, a drive chain and a gold drive chain, a gold front shock tube set, a battery cover and battery base plate, a controller cover, an ignition key switch lock and its cover, a turn signal tail light, a Bluetooth app module and a Pro Upgrade Kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow Villain owners shop it.\u003c\/strong\u003e Crash and cosmetic parts first: panels, fenders, handlebar. Then brakes and wheels. The Pro Upgrade Kit, the gold shock tubes and the gold chain are the upgrade side of the list for riders who want the bike to look or ride differently from stock. The app module and turn signal tail light are add-ons rather than replacements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment.\u003c\/strong\u003e Every item is tagged to the Villain (V1) and shows a fitment badge on the product card. Parts are added here as they are tested on the bike, not before.\u003c\/p\u003e","products":[{"product_id":"heybike-villain","title":"Heybike Villain (V1) 52V\/26Ah 4160W Off-Road Electric Dirt Bike","description":"\u003cp\u003eA 125 lb pit bike with a 4,160 W peak mid-drive and a FarDriver controller — the cheapest honest route into a real 45 mph e-dirt bike. Three speed modes cap it at 20 or 38 mph for a newer rider, then unlock the full 45 when they have earned it.\u003c\/p\u003e\u003cp\u003eThe 52V 26Ah pack lifts out, so it charges indoors and you can run a spare on long days. A magnetic kill switch cuts power the instant the rider comes off, and a start lockout stops accidental launches in the driveway. The controller pairs over an app for throttle response, power ramp, regen and speed limits.\u003c\/p\u003e\u003cp\u003eMotorHabit is an authorized Heybike dealer. Warranty claims start with us, not a call center. Ships free.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Classic","offer_id":54411573461302,"sku":"HB1VillainUSBY1A","price":1299.0,"currency_code":"USD","in_stock":true},{"title":"Midnight Black","offer_id":54411573494070,"sku":"HB1VillainUSBK1A","price":1399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/08_88cb5832-2faf-4267-9c2d-6e4438696936.png?v=1786821232"},{"product_id":"heybike-villain-bluetooth-app-module","title":"Heybike Villain Bluetooth App Module","description":"\u003cp\u003eA Bluetooth module for the Heybike Villain (V1) that connects the bike to the Heybike phone app. Once it is fitted, ride data and setting changes are handled from your phone instead of by cycling through menus on the bar display. It adds app connectivity to a Villain that did not come with it, or replaces a module that has stopped pairing.\u003c\/p\u003e\u003cp\u003eThe interface is Bluetooth to the Heybike app, and the function is ride data plus setting changes. Fitment is the Heybike Villain V1. Pair the module with the app before you ride so you can confirm it is reading the bike, and keep the display on the bars, since the app supplements rather than replaces it. If the app will not find the bike after fitting, check that the module is fully seated and powered before assuming it is faulty.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415712321846,"sku":"YM2ButhmoUSBK1A","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/6d6592498c1cb5959fa04d498780b0e3.webp?v=1786904028"},{"product_id":"heybike-villain-upgraded-front-fender","title":"Heybike Villain Upgraded Front Fender","description":"\u003cp\u003eThe upgraded front fender for the Heybike Villain V1, a stiffer replacement for the standard front blade. It goes on in place of the stock fender and uses the stock fasteners, so fitting is a straight swap with no new hardware.\u003c\/p\u003e\u003cp\u003eThe stiffer construction is the point: stock blades tend to crack at the mounting tabs, and this version resists that flex. It is worth the difference over the standard part if you have already cracked an original at the tabs. Keep the stock bolts when you remove the old fender, and check them again after the first few muddy rides, since packed mud loads a front fender more than you would expect.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415712354614,"sku":"HB2Villain018FUSBK1C","price":61.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/UpgradedFrontFender_2.png?v=1786904029"},{"product_id":"heybike-villain-turn-signal-tail-light","title":"Heybike Villain Turn Signal Tail Light","description":"\u003cp\u003eThis is a tail light with integrated turn signals for the Heybike Villain (V1). The Villain does not ship with indicators, and in most places that allow any road use at all they are a prerequisite, so this unit adds them in one piece together with the rear light. It is the first part to look at if you want the Villain to be seen from behind in traffic.\u003c\/p\u003e\u003cp\u003eType: tail light with integrated turn signals. Fitment: Heybike Villain, V1 only. Check local requirements before any road use, since a tail light and indicators are only part of what most areas ask for on a street-ridden machine, and rules differ by state and city. Confirm your Villain is the V1 before ordering.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415712387382,"sku":"XT2TlightUSBK1A","price":62.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/HeybikeVillainTailLightRechargeableBikeLights.png?v=1786904030"},{"product_id":"heybike-villain-pro-upgrade-kit","title":"Heybike Villain Pro Upgrade Kit","description":"\u003cp\u003eHeybike's bundled Pro upgrade kit for the Heybike Villain (V1). It groups the headline performance parts Heybike offers for the bike into one multi-part bundle, so a rider upgrading a stock Villain gets the matched set in one order instead of building it piece by piece. It is for the Villain V1 only.\u003c\/p\u003e\u003cp\u003eThe format is a multi-part upgrade bundle and the contents are set by Heybike, which means they may change from one run to the next. Check the kit contents against what is already on your bike so you are not doubling up on a part you have fitted. Set aside time to fit the whole kit in one session, and keep the stock parts you remove in case you sell the bike or want to go back to the original setup.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415712485686,"sku":"Pro-Kits-4","price":657.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/HeybikeVillainelectricdirtbikeProKitaccessories.png?v=1786904034"},{"product_id":"heybike-villain-ignition-key-switch-lock","title":"Heybike Villain Ignition Key Switch Lock","description":"\u003cp\u003eA matched ignition barrel and key set for the Heybike Villain (V1). It replaces the original ignition switch when the keys are lost, or when the barrel has worn far enough that the key turns without positive detents and no longer clicks firmly into each position. Because the keys are matched to the barrel, there is no need to track down a locksmith.\u003c\/p\u003e\u003cp\u003eThe set includes the ignition barrel and its keys. Fitment is the Heybike Villain V1, and the barrel takes the place of the original switch. Once fitted, keep the spare key somewhere other than on the bike, since losing both means replacing the barrel again. Test that the key turns cleanly through every position before you close the bike up, and that the bike powers down fully in the off position.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415712682294,"sku":"HB2Villain032USBK1A","price":37.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/1_71d03d63-b821-46a8-a4ad-971c0b3cc54e.jpg?v=1786904036"},{"product_id":"heybike-villain-fender-set-front-and-rear","title":"Heybike Villain Fender Set, Front \u0026 Rear","description":"\u003cp\u003eBoth fenders for the Heybike Villain V1 sold together as a set. The front and rear fenders mount with the stock fasteners, so a full refresh is a straight swap without extra hardware.\u003c\/p\u003e\u003cp\u003eSold as a front and rear pair, it is the sensible choice when refreshing a bike that has had a hard season and both blades are scuffed or cracked. The front fender keeps mud off the rider and the headlight; the rear keeps spray off your back and gives the tail light a solid mount. Reuse the original bolts, move the tail light across, and check that the rear fender clears the tire with the suspension compressed.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415712715062,"sku":"HB2Villain018USBK1A","price":73.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/e151359d3e8832cbf22fa7e9fbadbb62.png?v=1786904039"},{"product_id":"heybike-villain-rear-disc-brake-caliper","title":"Heybike Villain Rear Disc Brake Caliper","description":"\u003cp\u003eThe rear hydraulic disc brake caliper for the Heybike Villain V1. It mounts to the stock caliper bracket in place of the original, so replacing a seized or leaking caliper does not mean changing brackets.\u003c\/p\u003e\u003cp\u003eThe rear caliper sits low and takes the worst of the mud and standing water, which is why it usually seizes before the front one does. Signs it is due: a dragging rear brake, a piston that will not retract, or fluid weeping at the piston. Type is hydraulic disc caliper, rear position, Villain V1 fitment. Plan to bleed the rear brake after fitting, since opening the hose lets air in.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415712747830,"sku":"HB2Villain029BUSBK1A","price":148.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/3d6e1f0a153e94c7fe7373fec9a86196.png?v=1786904040"},{"product_id":"heybike-villain-front-disc-brake-caliper","title":"Heybike Villain Front Disc Brake Caliper","description":"\u003cp\u003eThe front hydraulic brake caliper for the Heybike Villain V1. The front brake does most of the stopping on this bike, so a caliper with a sticking piston is worth fixing immediately rather than waiting for the next service.\u003c\/p\u003e\u003cp\u003eType is hydraulic disc caliper, front position; it mounts to the stock caliper bracket, so no adapter is involved. Fitment is the Villain V1. A sticking front piston shows as a brake that drags, heats the rotor or pulls the bike to one side. After fitting, bleed the front brake and bed the pads in with a few firm stops before riding hard. The rear caliper is listed separately.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415712878902,"sku":"HB2Villain029FUSBK1A","price":148.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/7f2be807be602647692b3904b767d5c7.png?v=1786904040"},{"product_id":"heybike-villain-rear-wheel","title":"Heybike Villain Rear Wheel","description":"\u003cp\u003eThis is a complete rear wheel assembly for the Heybike Villain (V1), sold as a single wheel. On the Villain the rear wheel takes the drive load and the landings, so it is the wheel that usually needs replacing first after a hard season or a bent rim. Buying the built assembly means no lacing or truing on your end.\u003c\/p\u003e\u003cp\u003eType: complete wheel assembly. Position: rear. Fitment: Heybike Villain, V1 only. Sold as: one wheel. Confirm you have the V1 before ordering. The listing does not itemize what comes with the assembly beyond the wheel, so plan to reuse your tire, tube and hardware unless they are supplied, and check drive and brake alignment before the first ride.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415712911670,"sku":"HB2Villain023USBK1A","price":311.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/50a07e6f1e102a93b3caf5dbbdc61810_293f5550-2fa6-4609-816e-a13038233c63.png?v=1786904041"},{"product_id":"heybike-villain-front-wheel","title":"Heybike Villain Front Wheel","description":"\u003cp\u003eThis is a complete front wheel assembly for the Heybike Villain (V1), sold as a single wheel. Buying the assembly rather than a bare rim saves you lacing and truing, which is not a job worth doing at home on a bike this heavy, and it gets a bent or cracked front wheel back to straight in one swap.\u003c\/p\u003e\u003cp\u003eType: complete wheel assembly. Position: front. Fitment: Heybike Villain, V1 only. Sold as: one wheel. Verify your Villain is the V1 before ordering. Unless they come with the assembly, your tire and tube carry over; after fitting, check the brake lines up and spin the wheel to make sure it runs true before you ride.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415712944438,"sku":"HB2Villain030USBK1A","price":311.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/40f1b848c6add8f222712d4f5d758ed9_c56374f9-7166-4f48-aca9-f6b35bf9adfd.png?v=1786904042"},{"product_id":"heybike-villain-lower-body-panel-right","title":"Heybike Villain Lower Body Panel, Right","description":"\u003cp\u003eThe right lower body panel for the Heybike Villain V1, sold on its own. Lower panels sit in the firing line for rocks thrown off the front wheel, so they crack long before the upper panels do, and buying a single side means replacing only what broke.\u003c\/p\u003e\u003cp\u003ePosition is lower, right side, and it is a single panel rather than a pair. Fitment is the Villain V1. Check the mounting points on the frame for bent tabs or missing grommets before fitting, because a panel bolted to a damaged mount will crack again in the same place. The left lower panel and the upper panels are listed separately.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415713108278,"sku":"HB2Villain136USBK1A","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/208ceb6d2e3e38810c0a6944a1a9f274.png?v=1786904047"},{"product_id":"heybike-villain-lower-body-panel-left","title":"Heybike Villain Lower Body Panel, Left","description":"\u003cp\u003eThe left lower body panel for the Heybike Villain V1, supplied as a single panel. The lower panels take the brunt of rocks off the front wheel and are normally the first bodywork to crack, so a one-side replacement keeps the cost to the panel that actually broke.\u003c\/p\u003e\u003cp\u003ePosition is lower, left side; fitment is the Villain V1; sold individually. When the old panel comes off, look at the fastener holes for elongation and at the frame tabs for cracks, and clean out the mud that collects behind lower panels before fitting the new one. The matching right lower panel is a separate listing if both sides are damaged.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415713141046,"sku":"HB2Villain135USBK1A","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/0d5074938faee4a83f8fe1a6b8581273.png?v=1786904048"},{"product_id":"heybike-villain-upper-body-panel-right","title":"Heybike Villain Upper Body Panel, Right","description":"\u003cp\u003eThe right upper body panel for the Heybike Villain V1, sold individually so a single crash-side panel does not cost you a pair. It replaces the original upper panel on the right side of the bike and fits the stock mounting points.\u003c\/p\u003e\u003cp\u003ePosition is upper, right side; sold as a single panel; fitment is the Villain V1. Upper panels usually go in a tip-over onto that side, so check the same side's lever and bar end while the panel is off. If the other side has weathered and you want both to match, a black left and right upper pair is listed separately. The lower panels are their own listings.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415713173814,"sku":"HB2Villain134USYE1A","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/69a3bbf3304b20abba32ac831d711729.png?v=1786904049"},{"product_id":"heybike-villain-upper-body-panel-left","title":"Heybike Villain Upper Body Panel, Left","description":"\u003cp\u003eThe left upper body panel for the Heybike Villain V1, offered on its own. It is the part to order after a left-side tip-over has scraped or cracked the original, and buying one panel means the undamaged right side stays as it is.\u003c\/p\u003e\u003cp\u003ePosition is upper, left side; fitment is the Villain V1; it is a single panel, not a pair. Fit it to clean, undamaged mounts and check that every fastener point lines up before tightening, since forcing a panel onto a bent tab starts the next crack. The right upper panel, a matched black upper pair and the lower panels are all listed separately.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415713206582,"sku":"HB2Villain133USYE1A","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/ac15e1abfbc5b058e95c19565407ade6.png?v=1786904052"},{"product_id":"heybike-villain-front-brake-disc-rotor","title":"Heybike Villain Front Brake Disc Rotor","description":"\u003cp\u003eReplacement front brake rotor for the Heybike Villain V1. It uses the stock rotor bolt pattern, so it bolts to the front hub in place of the original with no adapter.\u003c\/p\u003e\u003cp\u003eReplace a rotor that has been warped by a hard stop or worn below its service thickness; a warped rotor pulses through the lever and eats pads unevenly. Position is front; fitment is the Villain V1. Fit new pads with a new rotor if the old ones are glazed or worn to the backing, and torque the rotor bolts evenly in a star pattern. The rear rotor is a separate listing.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415713239350,"sku":"HB2Villain028USBK1A","price":61.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/2baa1bead77567e1d23905d6417b0104_a25b67bd-ffad-43ee-96d1-5ebd63ddc545.png?v=1786904053"},{"product_id":"heybike-villain-rear-brake-disc-rotor","title":"Heybike Villain Rear Brake Disc Rotor","description":"\u003cp\u003eReplacement rear brake rotor for the Heybike Villain V1, mounting on the stock rotor bolt pattern so it bolts straight to the rear hub in place of the original.\u003c\/p\u003e\u003cp\u003eRear rotors get bent by rocks and ruts more often than they wear out, so check yours for runout if the rear brake has started dragging or ticking once per wheel turn. Position is rear; fitment is the Villain V1. Clean the hub face before fitting so the new rotor sits flat, and inspect the rear pads at the same time since a bent rotor usually wears them on one side. The front rotor is listed separately.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415713272118,"sku":"HB2Villain028USBK1A","price":61.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/2baa1bead77567e1d23905d6417b0104.png?v=1786904053"},{"product_id":"heybike-villain-controller-cover","title":"Heybike Villain Controller Cover","description":"\u003cp\u003eThe cover over the controller tray on the Heybike Villain V1. Its job is shielding the controller and its connectors from direct water and debris, which matters most on a bike that gets pressure-washed after every ride.\u003c\/p\u003e\u003cp\u003eIt fits the controller tray position on the Villain V1 and replaces a cracked or missing original. Without the cover, spray reaches the connectors, and corrosion there shows up later as intermittent faults that are hard to trace. Fit it, and when washing the bike avoid aiming a pressure washer straight at the controller area even with the cover in place.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415713304886,"sku":"HB2Villain092USBK1A","price":32.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/ffd9fc2e77d472850a8fc9763287dc67.png?v=1786904054"},{"product_id":"heybike-villain-battery-base-plate","title":"Heybike Villain Battery Base Plate","description":"\u003cp\u003eThe base plate the battery sits on in the Heybike Villain V1. It forms the floor of the battery tray and does two jobs: it locates the pack and it carries the pack's weight.\u003c\/p\u003e\u003cp\u003eA distorted plate lets the pack move under load, and a moving pack chafes the main power leads over time, so replace a bent or cracked plate rather than shimming it. Fitment is the Villain V1, battery tray floor position. While the plate is out, check the leads where they pass the tray for worn insulation, and make sure the pack sits flat and does not rock before you close the bay.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415713337654,"sku":"HB2Villain019USBK1A","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/9234a1ddd76fb3c70452c5ce45d6b18c.png?v=1786904055"},{"product_id":"heybike-villain-battery-cover","title":"Heybike Villain Battery Cover","description":"\u003cp\u003eThe cover over the battery bay on the Heybike Villain V1. It does two things: it tidies up the look of the bike, and it sheds water so direct spray stays off the pack terminals, which is worth more than it looks once you ride in rain.\u003c\/p\u003e\u003cp\u003eThe part fits the battery bay position on the Villain V1 and replaces a cracked, scuffed or missing original. Check that it seats fully around the whole edge, since a cover that sits proud on one side channels water in rather than away. It is cosmetic and water-shedding only; the base plate that supports the pack is a separate part.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415713370422,"sku":"HB2Villain033USBK1A","price":37.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/2f9daa2dd961d3dc878ec6f1ece02293.png?v=1786904059"},{"product_id":"heybike-villain-ignition-switch-cover","title":"Heybike Villain Ignition Switch Cover","description":"\u003cp\u003eThe trim cover around the ignition switch on the Heybike Villain V1. Its job is keeping water out of the switch barrel, which is what kills most ignition switches on bikes kept outdoors or washed often.\u003c\/p\u003e\u003cp\u003ePosition is the ignition switch surround; fitment is the Villain V1. Replace it if the original has cracked, gone brittle or gone missing, and fit it before the switch starts acting up rather than after. If the switch is already intermittent, drying out the barrel and fitting a fresh cover is the first thing to try before replacing the switch itself.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415713403190,"sku":"HB2Villain137USBK1A","price":18.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/2efb663dab050cf62126411bb15875e0.png?v=1786904060"},{"product_id":"heybike-villain-gold-front-shock-tube-set","title":"Heybike Villain Gold Front Shock Tube Set","description":"\u003cp\u003eThis is a matched left and right pair of gold-finish front fork tubes for the Heybike Villain (V1). It is the most visible upgrade you can make to the Villain's front end, and it is also a straightforward fix if you have bent or pitted a stock tube after a crash or a season of hard use.\u003c\/p\u003e\u003cp\u003eFinish: gold. Sold as: left and right pair. Position: front fork. Fitment: Heybike Villain, V1 only. Replace both tubes together so the fork stays matched; a single new tube alongside a worn one does not ride evenly. Confirm your Villain is the V1 before ordering, and inspect the seals while the fork is apart.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415713435958,"sku":"HB2Villain008USGD1A","price":373.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/4abbdfdd245616e9de6833c4201c5074.png?v=1786904060"},{"product_id":"heybike-villain-gold-drive-chain","title":"Heybike Villain Gold Drive Chain","description":"\u003cp\u003eThe gold-finish version of the Heybike Villain (V1) drive chain. Functionally it is the same part as the standard chain, bought for how it looks against a dark frame, and it pairs with the gold front shock tube set for a matched look. It replaces a stretched or rusty chain and fits the stock sprockets without any other change.\u003c\/p\u003e\u003cp\u003eFinish is gold and the length is stock, so no cutting is required. Fitment is the Heybike Villain V1. Fit it, then set the slack to match what the bike calls for, since the fresh chain will have none of the stretch you had been compensating for. A new chain on a hooked sprocket wears fast, so check the sprocket teeth before fitting, and lube the chain before the first ride rather than running it dry out of the box.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415713468726,"sku":"HB2Villain035USGD1A","price":73.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/59bfa6696d25125abdceef4bd03c9d82.png?v=1786904061"},{"product_id":"heybike-villain-handlebar","title":"Heybike Villain Handlebar","description":"\u003cp\u003eReplacement handlebar for the Heybike Villain (V1) in the stock bend, so the riding position and control reach stay the same as they were from the factory. It is the part for a bar that has been folded in a crash or bent at the clamps. A bar that has been bent straight again is work-hardened where it folded and will go a second time without warning, so replace it rather than re-bending.\u003c\/p\u003e\u003cp\u003eThe bend is the stock Villain profile and the clamp section matches the stock riser spacing, so it fits the existing risers without shims or new clamps. Fitment is the Heybike Villain V1. When swapping, move the grips, throttle, levers and switches across one at a time so the cable runs stay where they were, then center the bar in the risers and tighten the clamps evenly in a cross pattern.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415713861942,"sku":"HB2Villain060USBK1A","price":123.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/9ed434bdc929812d8030948f57d8e88f_1f882ac5-8a5a-4a7e-9ef8-34a48871c6da.png?v=1786904067"},{"product_id":"heybike-villain-black-upper-panels-left-and-right","title":"Heybike Villain Black Upper Panels, Left \u0026 Right","description":"\u003cp\u003eA matched pair of black upper body panels for the Heybike Villain V1, left and right sides together. Buying the pair keeps the finish consistent from one side to the other, which matters once the originals have weathered unevenly or one side has already been replaced.\u003c\/p\u003e\u003cp\u003eFinish is black; position is upper; sold as a left and right pair. Fitment is the Villain V1. Fit them to undamaged mounts and check each fastener point for a cracked tab before bolting up. Single upper panels and the lower panels are listed separately for riders who only need one side replaced.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415713894710,"sku":"HB2Villain152USBK1A","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/ba9219fa6d1454c526240fd86aa6cf44.png?v=1786904068"},{"product_id":"heybike-villain-replacement-seat-black","title":"Heybike Villain Replacement Seat, Black","description":"\u003cp\u003eThis is the black-finish replacement seat for the Heybike Villain (V1). It is the same part as the standard Villain seat with a black cover, picked by riders who want the seat to sit against the black bodywork rather than contrast with it. It replaces a seat whose cover has split or whose foam has gone soft, and it drops onto the stock seat mounts.\u003c\/p\u003e\u003cp\u003eThe cover is grip-textured, which keeps you planted when you slide forward under braking or back on the power. Fitment is the Heybike Villain V1 only. Mounting uses the stock seat mounts, so the existing hardware carries over and no adapter is needed. If the old cover has been torn for a while, check the foam underneath before reinstalling anything, since soaked foam is usually why a seat feels heavy and stays damp.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415713927478,"sku":"HB2Villain025USBK1B","price":123.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/c56278e19f71e8668f44329ab70dc009.png?v=1786904068"},{"product_id":"heybike-villain-drive-chain","title":"Heybike Villain Drive Chain","description":"\u003cp\u003eReplacement drive chain for the Heybike Villain (V1), a new OEM part cut to the Villain's stock length. A stretched chain destroys sprockets quietly and expensively, so replace it as soon as you find tight spots rather than waiting for it to jump. It replaces a chain that has stretched, stiffened or rusted through.\u003c\/p\u003e\u003cp\u003eLength is stock, so no cutting is required, and the condition is a new OEM replacement. Fitment is the Heybike Villain V1. When you swap it, look at the sprocket teeth: hooked or shark-finned teeth will chew a new chain, and a chain and sprockets that have worn together should usually be replaced together. Set the slack after fitting, since the new chain has none of the stretch the old one had. A gold-finish version is listed separately.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415713960246,"sku":"HB2Villain035USBK1A","price":37.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/e2dede720587d46f1524af7b1ed973db.png?v=1786904071"},{"product_id":"heybike-villain-number-plate","title":"Heybike Villain Number Plate","description":"\u003cp\u003eThe original-style front number plate for the Heybike Villain V1. It carries race numbers, which most track days require, and it shields the headlight and front cabling from roost thrown up by the bike ahead.\u003c\/p\u003e\u003cp\u003ePosition is front; fitment is the Villain V1. It replaces a plate that has been cracked or lost, or fits a bike that came without one. Use it as the place for the race number rather than taping numbers to the headlight, and check the mounts after a crash, since the plate takes the hit before the headlight does.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415713993014,"sku":"HB2Villain069USBK1A","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/eb3e8665a8b952789239017fbae37413.png?v=1786904072"},{"product_id":"heybike-villain-right-brake-lever","title":"Heybike Villain Right Brake Lever","description":"\u003cp\u003eThe right-hand hydraulic brake lever and master cylinder for the Heybike Villain V1. It is sold individually, because you rarely break both levers in the same crash.\u003c\/p\u003e\u003cp\u003eType is a hydraulic lever with master cylinder; side is right; the clamp fits the stock handlebar diameter. Fitment is the Villain V1. Fitting a new master cylinder means connecting the hose and bleeding that brake, so have fluid and a bleed kit ready. Position the clamp so the lever can rotate slightly in a crash rather than snap, and the new one will last longer than the one it replaces.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415714025782,"sku":"HB2Villain005RUSBK1A","price":56.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/9b1a7b35789faa7f7b25b908a346bd46.png?v=1786904072"},{"product_id":"heybike-villain-left-brake-lever","title":"Heybike Villain Left Brake Lever","description":"\u003cp\u003eThe left-hand hydraulic brake lever and master cylinder for the Heybike Villain V1. Levers snap in almost every tip-over, so this is the spare worth having in the van before you need it.\u003c\/p\u003e\u003cp\u003eType is a hydraulic lever with master cylinder; side is left; the clamp matches the stock handlebar diameter. Fitment is the Villain V1. Because the master cylinder is part of the assembly, expect to bleed that brake after fitting. Set the clamp snug but not fully locked so the lever can pivot on the bar in a fall, and carry the old lever as a trail spare if only the blade is damaged.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415714058550,"sku":"HB2Villain005LUSBK1A","price":56.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/aa0e53f577c8041eb0dcd8445a8e0e4d.png?v=1786904073"},{"product_id":"heybike-villain-footpegs-left-and-right","title":"Heybike Villain Footpegs, Left \u0026 Right","description":"\u003cp\u003eA matched pair of footpegs, left and right, for the Heybike Villain (V1). Pegs absorb every landing you get slightly wrong, and once the teeth round off you lose grip precisely when standing on them matters. These replace a pair that has worn smooth or bent, and they fit the stock peg mounts on the frame.\u003c\/p\u003e\u003cp\u003eSold as a left and right pair, so both sides wear evenly from the same date. Fitment is the Heybike Villain V1 and mounting is to the stock peg mounts, reusing the existing hardware. Check the mounts for wear when you pull the worn pegs off, since a sloppy mount lets a new peg rock. Once fitted, confirm each peg folds up and returns before riding, and stand on both to make sure the teeth bite evenly.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415714091318,"sku":"HB2Villain014USBK1A","price":73.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/a32a40ee3ffaf2f858f78ed3f5d113a5.png?v=1786904074"},{"product_id":"heybike-villain-right-hand-grip","title":"Heybike Villain Right Hand Grip","description":"\u003cp\u003eThe right-hand grip for the Heybike Villain (V1), sold individually. This is the throttle-side grip, the one that wears out first because it takes the twisting load every time you get on the power. Buying it on its own means you replace the worn grip without paying for a left grip that is still fine.\u003c\/p\u003e\u003cp\u003eSold as a single grip for the right, throttle side. The bar diameter is stock, so it goes onto the Villain's throttle without trimming. Fitment is the Heybike Villain V1. When fitting, slide the old grip off without cutting into the throttle tube underneath, clean the tube, and make sure the new grip does not rub the bar or switch housing and slow the throttle's return before you ride. The matching left grip is listed separately.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415714124086,"sku":"HB2Villain038RUSBK1A","price":48.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/405b76520180c4de360eed83fe837a5c_3b05bcbf-6a7c-4f29-8da3-616618e2808e.png?v=1786904078"},{"product_id":"heybike-villain-left-hand-grip","title":"Heybike Villain Left Hand Grip","description":"\u003cp\u003eThe left-hand grip for the Heybike Villain (V1), sold individually. The left grip usually outlasts the throttle side, so buying singly saves replacing a grip that is still in good shape. It replaces a left grip that has torn, spun on the bar, or been damaged in a drop.\u003c\/p\u003e\u003cp\u003eSold as a single left grip in the stock bar diameter, so it fits the Villain's handlebar directly. Fitment is the Heybike Villain V1. To fit, remove the old grip, clean the bar end so there is no residue underneath, and work the new grip on fully so it sits against the bar end. A grip that will not stop spinning is usually sitting on a dirty bar rather than being the wrong size. The throttle-side grip is listed separately.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415714156854,"sku":"HB2Villain038LUSBK1A","price":48.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/3b31c278c56a9867c25407883eed84ad_671d364f-ed6f-4cf8-b9be-ac0b1a497585.png?v=1786904079"},{"product_id":"heybike-villain-twist-throttle","title":"Heybike Villain Twist Throttle","description":"\u003cp\u003eReplacement twist throttle for the Heybike Villain (V1). It is a twist throttle with the sensor integrated into the unit, replacing the original when it sticks, hesitates, or returns slowly. A throttle that hesitates on the way back to closed is a genuine safety issue, not a maintenance item to defer, so swap it rather than riding around it.\u003c\/p\u003e\u003cp\u003eThe throttle clamps to the stock handlebar diameter and fits the Heybike Villain V1. Because the sensor is integrated, the throttle body and sensor are replaced together rather than separately. When fitting, route the lead the same way as the original so it is not pinched at full lock, and check that the throttle snaps fully closed on its own with the bars turned both ways before powering the bike on.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415714189622,"sku":"HB2Villain001USBK1A","price":73.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/202b49e346a01a8cc954434091602648.png?v=1786904080"},{"product_id":"heybike-villain-display","title":"Heybike Villain Display","description":"\u003cp\u003eThe handlebar display for the Heybike Villain (V1). It shows speed, ride mode and battery state of charge, and it replaces a display that has fogged, lost segments, or stopped responding to its buttons. The button seal is what usually fails first on a bike that lives outdoors, so a fogged or dead display is common and cheap to fix.\u003c\/p\u003e\u003cp\u003eThe display mounts with a handlebar clamp in the stock position and fits the Heybike Villain V1. Fitting is a matter of unplugging the old unit, swapping the clamp over, and connecting the new display to the existing lead. Before you condemn a display, check the connector at the back for corrosion, since a green plug can mimic a dead screen. Once fitted, confirm ride mode and battery readings match what the bike is doing.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415714222390,"sku":"HB2Villain015USBK1A","price":123.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/d5ae89a86a87e82c576cad8aeceb7cfe.png?v=1786904080"},{"product_id":"heybike-villain-battery-charger","title":"Heybike Villain Battery Charger","description":"\u003cp\u003eThe standard wall charger for the Heybike Villain's removable battery, offered as a spare or as a replacement for the original. It is the same charger the bike uses day to day, so charging behavior does not change when you swap it in.\u003c\/p\u003e\u003cp\u003eIt runs from a standard wall outlet with no adapter, and fitment is the Villain V1. Many riders buy a second one so it lives in the van permanently and the original stays at home, which ends the hunt for the charger before every ride. If the original has a frayed lead or a connector that no longer seats cleanly in the pack, replace it rather than nursing it along.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415714255158,"sku":"HB2Villain010USBK1A","price":81.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/ec25a6a6f034fa9518f7938116bebeca_802186a4-f0f8-41a3-9af0-9d2a9411ccfa.png?v=1786904081"},{"product_id":"heybike-villain-mid-drive-motor","title":"Heybike Villain Mid-Drive Motor","description":"\u003cp\u003eThe complete mid-drive motor assembly for the Heybike Villain (V1). It is the same unit the bike leaves the factory with, supplied as a new OEM replacement, so it lands on the stock mounts and keeps your existing chain line without shimming. It replaces a motor that has failed, lost power, or started making noise that points to internal wear.\u003c\/p\u003e\u003cp\u003eType is a mid-drive motor assembly, mounting is the stock frame mounts with no adapter, and fitment is the Heybike Villain V1. Disconnect the battery before starting, note how the original is wired and mounted, and reconnect the chain to the new unit once it is bolted in. Check chain alignment by sighting along the chain once everything is torqued down, then set slack and run the bike on the stand before riding.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415714320694,"sku":"HB2Villain086USBK1A","price":611.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/56a85e16a046cb332aca2019e675a194.png?v=1786904085"},{"product_id":"heybike-villain-controller","title":"Heybike Villain Controller","description":"\u003cp\u003eThe motor controller for the Heybike Villain (V1). This is the part that translates throttle position into current, so a failing one shows up as cutouts and flat spots long before it dies completely. It replaces the original controller when the bike cuts out under load, hesitates off the line, or stops responding to the throttle entirely.\u003c\/p\u003e\u003cp\u003eThe controller uses the stock harness plugs and mounts in the stock controller tray, so it is a plug-for-plug swap with no splicing. Fitment is the Heybike Villain V1. Disconnect the battery before unplugging anything, label the connectors as you go, and seat each plug until it clicks. Rule out a loose connector and a worn throttle first, since both produce the same cutouts a bad controller does.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415714386230,"sku":"HB2Villain006USBK1A","price":225.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/e1e549ff5e25ae07eccdd1dba13a726c.png?v=1786904086"},{"product_id":"heybike-villain-replacement-seat","title":"Heybike Villain Replacement Seat","description":"\u003cp\u003eReplacement seat for the Heybike Villain (V1) in the standard finish. It takes the place of the original seat when the cover splits or the foam packs down, and it bolts to the stock seat mounts in the same position as the seat the bike shipped with. Once a seat cover splits, the foam underneath soaks up water and stays wet, so a torn cover is worth acting on early rather than riding on it through a season.\u003c\/p\u003e\u003cp\u003eThe cover is grip-textured to hold you in place when the bike moves under you. Fitment is the Heybike Villain V1, and it mounts to the stock seat mounts, so the existing bolts and brackets are reused. A black-finish version of the same seat is listed separately for riders who want it to match dark bodywork. Before fitting, clean the mount points and check that the old hardware is not rounded off.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415714418998,"sku":"HB2Villain025USBK1A","price":123.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/4563ef76276b0203c9dd7ea85527df31.png?v=1786904087"},{"product_id":"heybike-villain-rear-fender","title":"Heybike Villain Rear Fender","description":"\u003cp\u003eReplacement rear fender for the Heybike Villain V1. It keeps spray off your back and gives the tail light something solid to mount to, and it fits in place of the original using the stock fasteners.\u003c\/p\u003e\u003cp\u003ePosition is rear; fitment is the Villain V1. Swap it when the original has cracked or the tail light mount has loosened, and transfer the tail light across before discarding the old fender. Reuse the stock bolts and check clearance to the rear tire once the bike is back on the ground. A front and rear set is also listed if both need replacing.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415714451766,"sku":"HB2Villain018BUSBK1A","price":40.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/49fd47699b19c8a210b16de39e1f3e0e_81d77ced-d1f7-4809-9d3a-a80d8018e0af.png?v=1786904088"},{"product_id":"heybike-villain-front-fender","title":"Heybike Villain Front Fender","description":"\u003cp\u003eReplacement front fender for the Heybike Villain V1. It does most of the work keeping mud off you and the headlight, and it mounts in place of the original with the stock fasteners.\u003c\/p\u003e\u003cp\u003ePosition is front; fitment is the Villain V1. Stock fenders usually crack at the mounting tabs rather than across the blade, so inspect the tabs on yours if the fender has started to rattle. Keep the original bolts for the new part. If you have cracked more than one at the tabs, the stiffer upgraded front fender is listed separately.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415714484534,"sku":"HB2Villain018FUSBK1A","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/cf7a6149e66f43f386d3517ab0bb17fa_d2ffa731-41eb-426b-ba24-e3fb064f2f6f.png?v=1786904088"},{"product_id":"heybike-villain-kickstand","title":"Heybike Villain Kickstand","description":"\u003cp\u003eReplacement side stand for the Heybike Villain V1. It bolts to the stock stand mount in place of the original, with no adapter or extra bracket needed.\u003c\/p\u003e\u003cp\u003eA bent stand is a common trailside annoyance, and it is a cheap thing to keep a spare of if you ride in a group or trailer bikes often. Type is side stand; fitment is the Villain V1, stock stand mount. Tighten the mount bolt properly and check it after the first ride; a loose stand bolt is usually how a stand ends up bent in the first place.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415714517302,"sku":"HB2Villain012USBK1A","price":43.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/1bf06f97272431940379b6438e126626.png?v=1786904092"},{"product_id":"heybike-villain-replacement-battery","title":"Heybike Villain Replacement Battery","description":"\u003cp\u003eThe removable lithium-ion pack for the Heybike Villain V1, sold as a spare or as a replacement for a tired original. It is the same type of pack the bike runs, so it goes into the battery bay in place of the stock one without changes.\u003c\/p\u003e\u003cp\u003eA second pack is the only genuine way to double a ride day: swapping packs is a one-minute job, while charging is not. Run the first pack down, swap at the truck, and ride on. If the original has lost noticeable range or shows physical damage, this replaces it outright. Fitment is the Villain V1; check the pack seats fully on the base plate before closing the bay.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415714550070,"sku":"HB2Villain013USBK1A","price":811.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/b37921b961e5adb84e66048a85bbee72_9ca09cf5-13d3-4495-9366-d6e9dcf997bf.png?v=1786904092"},{"product_id":"heybike-villain-supermoto-tire-set-front-and-rear","title":"Heybike Villain Supermoto Tire Set, Front \u0026 Rear","description":"\u003cp\u003eThis is a front and rear supermoto tire set for the Heybike Villain (V1). It is the single change that most alters how the bike feels on pavement. Knobby tires squirm and wear out fast on asphalt, where a supermoto pattern lets you lean on the bike with confidence. It is the set for riders who mostly ride streets and hard-pack.\u003c\/p\u003e\u003cp\u003eSold as: front and rear pair. Surface: pavement and hard-pack. Fitment: Heybike Villain, V1 only. Note: not suited to soft terrain, so keep the knobbies if you split time between street and loose dirt. Fit both tires together so front and rear grip match, and set tire pressures for the new tires after mounting.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415714615606,"sku":"HB2Villain167USBK1A","price":436.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/7fcad5fa308a487aa51846454cf2966a.png?v=1786904093"},{"product_id":"guts-heybike-villain-seat","title":"GUTS Heybike Villain Seat","description":"\u003cp\u003eThis page covers every GUTS Racing seat cover built for the Heybike Villain, model years 2025-26. Choose the RF1 Fast Arrow pattern for mid-range grip, the ribbed interactive cover in the gripper material GUTS supplies to factory race teams, or the clean non-ribbed cover.\u003c\/p\u003e\u003cp\u003eEach cover is cut and sewn to order at GUTS Racing's California factory, with a standard or black ballistic nylon knee panel. Build time runs 10-14 business days. Nothing here is held in stock ahead of an order.\u003c\/p\u003e","brand":"GUTS Racing","offers":[{"title":"RF1 cover \/ Standard","offer_id":54460749283638,"sku":"E55-3-HEYBIKE-RF1-COVER","price":99.99,"currency_code":"USD","in_stock":true},{"title":"RF1 cover \/ Ballistic nylon, black","offer_id":54460749316406,"sku":"E55-3-HEYBIKE-RF1-COVER-BN","price":116.98,"currency_code":"USD","in_stock":true},{"title":"Ribbed cover \/ Standard","offer_id":54460749349174,"sku":"E55-8-HEYBIKE-RIB-COVER","price":79.99,"currency_code":"USD","in_stock":true},{"title":"Non-ribbed cover \/ Standard","offer_id":54460749381942,"sku":"E55-6-HEYBIKE-NONRIBCOVER","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/E55-3-HEYBIKE-RF1-COVER-2.jpg?v=1787183074"},{"product_id":"yozma-in10-cockpit-cleanup-kit-wire-organizer","title":"Yozma IN 10 Cockpit Cleanup Kit \/ Wire Organizer","description":"\u003cp\u003eA small kit for tidying the cockpit wiring on the Yozma IN 10, IN 10 Pro and Heybike Villain. Stock cable routing on these bikes is loose, and this gives you six zip ties plus the pieces Mazo Mods includes to pull the wires in tight against the bars and frame.\u003c\/p\u003e\u003cp\u003eIt is a cheap fix that changes how the front of the bike looks more than you would expect, and it keeps cables away from the fork and levers. Shipping weight is about 0.1 lb.\u003c\/p\u003e","brand":"Mazo Mods","offers":[{"title":"Default Title","offer_id":54500627513654,"sku":"sku-47601202364661","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/P1090040.jpg?v=1788368418"},{"product_id":"yozma-in10-shock-cover","title":"Yozma IN 10 Shock Cover, 27 cm","description":"\u003cp\u003eA 27 cm black cover for the rear shock on the Yozma IN 10, IN 10 Pro and Heybike Villain. It keeps dirt and debris off the shock body and seal, which is where wear starts, and it also covers the stock red spring for riders who want a blacked-out rear end.\u003c\/p\u003e\u003cp\u003eIt slides over the shock and needs no tools beyond what it takes to unbolt the shock if you prefer to fit it that way. Shipping weight is about 0.1 lb.\u003c\/p\u003e","brand":"Mazo Mods","offers":[{"title":"Black","offer_id":54500627710262,"sku":"sku-47599065235701","price":9.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/P1080987.jpg?v=1788368417"},{"product_id":"yozma-in10-wide-pegs","title":"Yozma IN 10 Wide Foot Pegs, Black or Silver","description":"\u003cp\u003eWide foot pegs for the Yozma IN 10, IN 10 Pro and Heybike Villain, finished with burnt-blue screws. A wider platform gives your boots more to stand on and makes standing through rough ground less tiring. Choose black or silver. Mazo Mods also lists them for Strike Shadow bikes, which we do not stock.\u003c\/p\u003e\u003cp\u003eThey reuse the stock spring and screw, so nothing else is needed. Mazo Mods notes that if a peg does not slide in cleanly, the peg mount is usually bent, which is common in transit, and tapping it back to its original position fixes the fit. Mazo Mods currently quotes a 2 to 3 week lead time before these ship. Shipping weight is about 0.5 lb.\u003c\/p\u003e","brand":"Mazo Mods","offers":[{"title":"Black","offer_id":54500627579190,"sku":"sku-48043372118261","price":57.99,"currency_code":"USD","in_stock":false},{"title":"Silver","offer_id":54500627611958,"sku":"sku-48508797550837","price":57.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/2FDC17DC-C89B-496C-AE61-95F2FB1D4BA7.jpg?v=1788368418"},{"product_id":"yozma-in10-middle-mount-for-screen","title":"Yozma IN 10 Center Display Mount","description":"\u003cp\u003eA mount that relocates the stock display to the center of the handlebar on the Yozma IN 10 and IN 10 Pro, where it is easier to read and out of the way of the levers. It also works on other bikes that use the same screen, and Mazo Mods files it for the Heybike Villain.\u003c\/p\u003e\u003cp\u003eIt comes with two zip ties to hold it to the bars. Fitting it is a two-minute job with no cutting. Shipping weight is about 0.1 lb.\u003c\/p\u003e","brand":"Mazo Mods","offers":[{"title":"Default Title","offer_id":54500627841334,"sku":"sku-47674151698677","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/P1080965.jpg?v=1788368418"},{"product_id":"heybike-villian-plug-and-play-baja","title":"Heybike Villain Plug-and-Play Baja Light","description":"\u003cp\u003eA Baja-style lighting upgrade for the Heybike Villain that plugs straight into the bike with no wiring modifications. Mazo Mods includes the mount and all of the hardware needed, so installation is bolting the bar on and connecting it. Choose a yellow or white lens to suit how you ride.\u003c\/p\u003e\u003cp\u003eMazo Mods asks that the bike be switched off and the battery unplugged before installing. It removes just as cleanly if you want the bike back to stock, which also makes it easy to move between bikes. Shipping weight is about 0.3 lb.\u003c\/p\u003e","brand":"Mazo Mods","offers":[{"title":"HEYBIKE-Yellow","offer_id":54500627939638,"sku":"sku-48335541633269","price":29.99,"currency_code":"USD","in_stock":false},{"title":"HEYBIKE-White","offer_id":54500627972406,"sku":"sku-48335541666037","price":29.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/P1090007_734939e8-01ed-4a4e-8f40-31e4dda9b9c5.jpg?v=1788368418"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/collections\/08_88cb5832-2faf-4267-9c2d-6e4438696936.png?v=1787260383","url":"https:\/\/motorhabit.com\/collections\/vlln.oembed","provider":"MotorHabit","version":"1.0","type":"link"}