{"title":"Talaria XXX","description":"\u003cp\u003e\u003cstrong\u003eWhat fits the XXX.\u003c\/strong\u003e Ten parts checked against the Talaria XXX. XXX-specific: a rear fender, an inner tube and a transmission belt. Shared with other platforms and confirmed on the XXX: a front shock absorber core, a battery cover bag, a brake disc guard, footpegs and a front number plate that also covers the Surron Light Bee X and S, the Sting MX3 and MX4 and the Segway X260 and X160.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot a Sting.\u003c\/strong\u003e The XXX is a different bike to the Sting line despite the shared badge, so Sting parts are not assumed to fit. A part reaches this page only after it has been checked on the XXX. Because of that the list is short, and it grows one confirmed part at a time. The belt, tube and fender are the items XXX owners replace most; the guard and bag are the add-ons.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment.\u003c\/strong\u003e Every part carries a Talaria XXX fitment tag and a fitment badge on the product card. If a title names Sting models and not XXX, it does not belong here and you will not find it on this page.\u003c\/p\u003e","products":[{"product_id":"jfg-rear-fender-fit-talaria-xxx","title":"Rear Fender Fit Talaria XXX","description":"\u003cp\u003eRear fender for the Talaria XXX. It sits over the rear wheel and catches the mud, sand, and small stones the tire throws up on wet or loose ground, so the rider's back and the rear of the bike stay cleaner. It is a bolt-on bodywork piece for the XXX platform and does not change how the bike rides.\u003c\/p\u003e\u003cp\u003eThe vendor listing does not pin down a single material, so go by the product photos for finish and shape rather than assuming carbon or plastic. Before fitting, hold the fender up against the rear mounting points on your XXX and confirm the holes line up, then reuse the stock fasteners if they are in good shape. One practical note: on a bike that sees a lot of mud, tighten the fender bolts with a dab of thread locker so they do not back out from vibration.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"Black","offer_id":54475984208182,"sku":"A11132511","price":35.99,"currency_code":"USD","in_stock":true},{"title":"Imitation carbon fiber","offer_id":54475984240950,"sku":"A11282502","price":41.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/rear-cushion-fender-fit-talaria-sting-x3-black_f71375a3-08c2-42e2-a138-4b310435ce03.jpg?v=1787793665"},{"product_id":"jfg-inner-tube-fit-talaria-xxx","title":"Inner Tube Fit Talaria XXX","description":"\u003cp\u003eThis inner tube is made for the Talaria XXX. It replaces a punctured or aged stock tube and is the part to keep on the shelf for the next flat.\u003c\/p\u003e\u003cp\u003eThe tube is butyl, which holds air well and resists wear over time. The package includes one inner tube as shown in the photos; installation instructions are not included. Check the tire size on the sidewall against the listing before ordering. When installing, inspect the tire for the object that caused the last flat, use rim tape in good condition, and seat the tube with a little air before mounting the tire.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"rear","offer_id":54475985813814,"sku":"A20172504","price":39.99,"currency_code":"USD","in_stock":true},{"title":"front","offer_id":54475985846582,"sku":"A20172503","price":37.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/inner-tube-fit-talaria-xxx.jpg?v=1787793734"},{"product_id":"jfg-rearview-mirror-for-surron-x-s-1","title":"Rearview Mirror for Sur-Ron Talaria Segway","description":"\u003cp\u003eA rearview mirror for the Surron Light Bee X, E-Ride Pro SS, Talaria Sting MX3, Talaria Sting MX4, Talaria XXX and the Segway X260 and X160. It mounts without taking the original side mirror position, so you can add it alongside a stock mirror or run it alone on a bike that has none.\u003c\/p\u003e\u003cp\u003eThe shell is 6061-T6 aluminum alloy, scratch-resistant, waterproof and corrosion-resistant. The lens is high-reflectivity glass for a clear, sharp view. The bracket rotates 360 degrees, so the mirror can be turned to clear blind spots. Position it where it does not hit the tank or lever at full lock, and snug the bracket bolt after you have checked the view from the seat.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"Red","offer_id":54475987026230,"sku":"A111520032","price":47.99,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":54475987058998,"sku":"A111520033","price":47.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/rearview-mirror-for-surron-talaria-segway-red.jpg?v=1787793797"},{"product_id":"jfg-transmission-belt-for-talaria","title":"Transmission Belt for Talaria XXX","description":"\u003cp\u003eDrive belt for the Talaria XXX. It replaces an old, cracked, or worn belt and restores smooth drive from the motor to the rear wheel. Fitment is specific to the XXX, so check the model before ordering.\u003c\/p\u003e\u003cp\u003eMade from a specially designed rubber compound chosen for wear resistance and mechanical strength, and engineered to hold up over long-term use. The package includes one drive belt. When you fit it, clean rubber dust out of the pulleys, check for any nicks in the pulley teeth, set belt tension to spec, and spin the wheel by hand to see that the belt runs true before you ride.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"1pcs","offer_id":54475988009270,"sku":"S16122001-C","price":39.99,"currency_code":"USD","in_stock":true},{"title":"2pcs","offer_id":54475988042038,"sku":"S16122001*2-C","price":75.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/transmission-belt-for-talaria-xxx-jfg-racing-1_db05a4b2-a78e-4f3b-bc91-c4a65718adf4.jpg?v=1787793812"},{"product_id":"jfg-front-shock-absorber-core-for-talaria-sting","title":"Front Shock Absorber Core for Talaria Sting","description":"\u003cp\u003eThis front shock absorber core fits the Talaria Sting MX3, Talaria Sting MX4, and Talaria XXX. It goes in place of the stock front fork core without modification. Fit it when the original is worn, or when you want a fresh core in a color that matches the bike.\u003c\/p\u003e\u003cp\u003eThe core is aluminum alloy and iron, which gives it durability, stability, and corrosion resistance. It comes in red, blue, gold, purple, or black as pictured. It slots into the fork where the original sits. Before reassembly, wipe the fork tubes down, swap any tired seals while everything is apart, and pump the front end through its stroke a few times to confirm it moves without sticking.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"black","offer_id":54475988861238,"sku":"A191420017-A","price":22.99,"currency_code":"USD","in_stock":true},{"title":"red","offer_id":54475988894006,"sku":"A191420012-A","price":22.99,"currency_code":"USD","in_stock":true},{"title":"blue","offer_id":54475988926774,"sku":"A191420013-A","price":22.99,"currency_code":"USD","in_stock":false},{"title":"gold","offer_id":54475988959542,"sku":"A191420015-A","price":22.99,"currency_code":"USD","in_stock":true},{"title":"purple","offer_id":54475988992310,"sku":"A191420019-A","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/front-shock-absorber-core-for-talaria-sting-jfg-racing-1.jpg?v=1787793843"},{"product_id":"jfg-battery-cover-bag-for-sur-ron","title":"Battery Cover Bag for Sur-Ron Segway Talaria","description":"\u003cp\u003eThis battery cover bag is a tank-style bag that fits the Surron Light Bee X, Segway X160 and X260, Talaria Sting MX3 and MX4, and Talaria XXX. It sits over the battery area and gives you on-bike storage for a phone, wallet, earphones, and other small items that would otherwise ride in a pocket.\u003c\/p\u003e\u003cp\u003eThe bag is tarpaulin, which is waterproof and holds up to heat, so rain does not get to what is inside. An internal mesh pocket keeps small items separate so they do not rattle around. It straps over the battery area on each of the listed bikes. Check that the straps do not pinch any wiring or rub the frame before you ride, and pull them tight so the bag stays put on rough ground.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"Black","offer_id":54475998200118,"sku":"A211420017","price":26.99,"currency_code":"USD","in_stock":true},{"title":"Grey","offer_id":54475998232886,"sku":"A211420018","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/Battery-Cover-Bag-For_Sur-Ron-Segway-Talaria-Black.jpg?v=1787794059"},{"product_id":"jfg-rear-axle-nut-for-for-electric-dirt-bikes","title":"Rear Axle Nut for for Electric Dirt Bikes","description":"\u003cp\u003eThis rear axle nut fits the Surron Light Bee X, Talaria Sting MX3, MX4, Sting R and XXX, E-Ride Pro SS, and Rawrr Mantis. It replaces the stock rear axle nut and seals the axle end against dust and debris, which keeps the axle and the parts behind it cleaner.\u003c\/p\u003e\u003cp\u003eThe nut is aluminum with an anodized coating for corrosion and wear resistance, so it keeps its finish over time. Thread size is M12 x 1.25 pitch; check your axle thread before ordering. It threads on in place of the stock nut. Torque to spec and do not overtighten an aluminum nut; re-check after the first ride.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"Black","offer_id":54476000428342,"sku":"A202220017","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Orange","offer_id":54476000461110,"sku":"A202220011","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":54476000493878,"sku":"A202220012","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":54476000526646,"sku":"A202220013","price":25.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/rear-axle-nut-for-for-electric-dirt-bikes-black.jpg?v=1787794117"},{"product_id":"jfg-brake-disc-guard-protector-for-surron","title":"Brake Disc Guard for Sur-Ron Talaria Segway","description":"\u003cp\u003eA front brake disc guard cut from 6061-T6 aluminum alloy for the Surron Light Bee X, Talaria Sting MX3, Talaria Sting MX4, Talaria XXX and the Segway X260 and X160. The front rotor sits low and forward, where sand, gravel and mud hit it first. This guard puts a plate between the disc and that debris.\u003c\/p\u003e\u003cp\u003e6061-T6 is a heat-treated alloy, so the guard is stiff for its weight and does not bend easily on rock strikes. It carries a glossy paint finish that resists scuffs and scratches. It fits over the stock front disc on the listed bikes. Check that your front rotor is the factory size before installing, and make sure the guard clears the caliper through the full travel of the fork.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"Black","offer_id":54476004294966,"sku":"A131420037","price":47.99,"currency_code":"USD","in_stock":true},{"title":"Orange","offer_id":54476004327734,"sku":"A131420031","price":47.99,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":54476004360502,"sku":"A131420032","price":47.99,"currency_code":"USD","in_stock":true},{"title":"Gold","offer_id":54476004393270,"sku":"A131420035","price":47.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/brake-disc-guard-for-surron-talaria-segway-black_39a997db-1446-4d94-975b-616d66d7e84e.jpg?v=1787794202"},{"product_id":"jfg-footpegs-for-sur-ron","title":"Footpegs for Sur-Ron Light Bee Segway Talaria","description":"\u003cp\u003eThese JFG Racing footpegs fit the Surron Light Bee X, Segway X260 and X160, Talaria Sting MX3 and MX4, and the Talaria XXX. They replace the stock pegs with a wider platform that gives your boots more purchase when standing through rough ground and helps keep your feet planted on landings.\u003c\/p\u003e\u003cp\u003eThe pegs are CNC machined from T7 7075 aluminum alloy and are rust and corrosion resistant. Each peg has 14 teeth on the top face for bite in wet or muddy conditions. An anti-friction pad on the underside protects the peg body from wear when the bike is leaned over or dragged. Swap them over using the stock peg pins and springs, and check the pin clips are seated before riding.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"red","offer_id":54476004950326,"sku":"A11140290","price":62.99,"currency_code":"USD","in_stock":true},{"title":"black","offer_id":54476004983094,"sku":"A11140291","price":62.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/footpegs-for-sur-ron-light-bee-jfg-racing-1.jpg?v=1787794232"},{"product_id":"jfg-front-number-plate-for-sur-ron","title":"Front Number Plate for Sur-Ron Light Bee X\/S, Talaria Sting MX3\/MX4 \u0026 XXX, Segway X260\/X160","description":"\u003cp\u003eA front number plate for the Surron Light Bee X, Talaria Sting MX3, Talaria Sting MX4, Talaria XXX, Segway X260 and Segway X160. It replaces the stock front plate or fills the spot on a bike that shipped without one, and gives you a flat surface for a race number or graphics.\u003c\/p\u003e\u003cp\u003eThe plate is molded from ABS plastic and PP, so it is light, wear resistant, waterproof and does not corrode. The face is matte black with no printed lines or patterns, which makes it a clean base for your own decals. Mounting is to the front of the bike in the factory plate position. If you are fitting aftermarket headlight or fork guards, check clearance with the plate before you commit to graphics.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"ABS","offer_id":54476005114166,"sku":"A14142024","price":16.99,"currency_code":"USD","in_stock":true},{"title":"PP","offer_id":54476005146934,"sku":"A11122007","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/14142024.png?v=1787794244"},{"product_id":"guts-talaria-xxx-seat","title":"GUTS Talaria XXX Seat","description":"\u003cp\u003eThis page covers every GUTS Racing seat option for the Talaria 3X xXx, model years 2023-26. Choose the RF1 Fast Arrow cover for mid-range grip, the ribbed interactive cover in the gripper material GUTS supplies to factory race teams, or the plain non-ribbed cover, on its own, as a complete bolt-on seat, or as replacement foam.\u003c\/p\u003e\u003cp\u003eFoam firmness comes in soft, medium or hard, with a standard or black ballistic nylon knee panel. Covers are cut and sewn to order with a 10-14 business day build time; complete seats and foam take 15-20.\u003c\/p\u003e","brand":"GUTS Racing","offers":[{"title":"RF1 cover \/ Standard","offer_id":54460754002230,"sku":"33-3-TALARIA-RF1-COVER","price":99.99,"currency_code":"USD","in_stock":true},{"title":"RF1 cover \/ Ballistic nylon, black","offer_id":54460754034998,"sku":"33-3-TALARIA-RF1-COVER-BN","price":116.98,"currency_code":"USD","in_stock":true},{"title":"Ribbed cover \/ Standard","offer_id":54460754067766,"sku":"33-8-TALARIA-RIBBED-COVER","price":79.99,"currency_code":"USD","in_stock":true},{"title":"Non-ribbed cover \/ Standard","offer_id":54460754100534,"sku":"33-6-TALARIA-NONRIBBED-COVER","price":69.99,"currency_code":"USD","in_stock":true},{"title":"RF1 complete seat \/ Standard","offer_id":54460754133302,"sku":"33-3-TALARIA-RF1-COMPLETE","price":159.99,"currency_code":"USD","in_stock":true},{"title":"RF1 complete seat \/ Ballistic nylon, black","offer_id":54460754166070,"sku":"33-3-TALARIA-RF1-COMPLETE-BN","price":176.98,"currency_code":"USD","in_stock":true},{"title":"Ribbed complete seat \/ Standard","offer_id":54460754198838,"sku":"33-8-TALARIA-RIBBED-COMPLET","price":139.99,"currency_code":"USD","in_stock":true},{"title":"Ribbed complete seat \/ Ballistic nylon, black","offer_id":54460754231606,"sku":"33-8-TALARIA-RIBBED-COMPLET-BN","price":156.98,"currency_code":"USD","in_stock":true},{"title":"Non-ribbed complete seat \/ Standard","offer_id":54460754264374,"sku":"33-6-TALARIA-NONRIBBED-COMPLET","price":129.99,"currency_code":"USD","in_stock":true},{"title":"Non-ribbed complete seat \/ Ballistic nylon, black","offer_id":54460754297142,"sku":"33-6-TALARIA-NONRIBBED-COMPLET-BN","price":146.98,"currency_code":"USD","in_stock":true},{"title":"Seat foam only \/ Standard","offer_id":54460754329910,"sku":"33-1-TALARIA-SEAT-FOAM","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/33-3-TALARIA-RF1-COVER-2.jpg?v=1787182998"},{"product_id":"warp9-surron-talaria-boost-spacer-front-rotor-bolts","title":"Warp 9 Surron \/ Talaria Boost Spacer front Rotor Bolts","description":"\u003cp\u003eExtended length titanium rotor bolts made to work with a 5mm boost spacer. When the rotor is moved outboard by a spacer, the standard bolts no longer have enough thread engagement, and these are the bolts that fix that.\u003c\/p\u003e\u003cp\u003eSix bolts are supplied, M5 x 16mm with Torx T25 heads, in a burnt blue anodized finish and with blue thread locker applied. The boost spacer itself is not included. They fit all front hubs, both stock and Warp 9, and Warp 9 lists them for bikes running boost forks such as the Fox 40, Manitou Dorado and EXT forks. Torque them in a cross pattern and recheck after the first ride.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475692736822,"sku":"S-TI-BOOST5MM-B","price":33.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/20221202_112025_edited.jpg?v=1787785013"},{"product_id":"warp9-steer-lock-replacment-base-nut-fender-mount","title":"Warp 9 Steer Lock Replacement Base Nut, Fender Mount","description":"\u003cp\u003eThe base nut for the Warp 9 Steer Lock kit in the fender mount style. It is the version to use where the fork's lower triple clamp has no fender mounting tabs of its own, so the fender has to hang off the steer lock instead.\u003c\/p\u003e\u003cp\u003eFitting a fender to it also needs the Warp 9 fender adapter, which is a separate part, so order both together if the bike is going from no fender to a fender. This is a service part and works with the Warp 9 Steer Lock kit only. Check which base nut is on the bike before ordering, since the two styles are not interchangeable.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475694178614,"sku":"S-STEERNUT-F-2","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/S-STEERNUT-F-2.jpg?v=1787785020"},{"product_id":"warp9-steer-lock-base-nut-no-fender","title":"Warp 9 Steer Lock Base Nut, No Fender","description":"\u003cp\u003eThe base nut for the Warp 9 Steer Lock kit in the version without a fender mount. It suits bikes whose fork lower clamps already carry the factory fender, so the steer lock does not have to provide a mounting point of its own.\u003c\/p\u003e\u003cp\u003eThis is a service part. It works with the Warp 9 Steer Lock kit and is not a stem lock on its own, so it is bought as a replacement or to change a kit from one style to the other. Check which base nut the bike currently runs before ordering, since the fender mount version and this one are not interchangeable once a fender adapter is in the picture.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475694244150,"sku":"S-STEERNUT-NF-2","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/S-STEERNUT-NF-2.jpg?v=1787785020"},{"product_id":"warp9-stem-lock-spacer-kit","title":"Warp 9 Stem Lock Spacer Kit","description":"\u003cp\u003eThe full spacer set for a Warp 9 Stem Lock, so stack height on the steering tube can be set without hunting for odd sizes one at a time. Five spacers are included, in 3mm, 5mm, 10mm, 15mm and 20mm.\u003c\/p\u003e\u003cp\u003eOnce the original bar mount comes off a steering tube, there is almost always a gap to take up, and getting the stack right is what keeps the bearing preload correct. Having the whole range on the bench means the height can be set once and left alone. It is a service part and works with Warp 9 Stem Locks. Keep the spares with the bike for the next front end change.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475694309686,"sku":"S-STEERSPACERS-2","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/S-STEERSPACERS-2.jpg?v=1787785021"},{"product_id":"warp9-steerlock-replacement-cap","title":"Warp 9 Steer Lock Replacement Cap","description":"\u003cp\u003eThe anodized top cap for a Warp 9 Steer Lock. It sits at the very top of the steering stem, which makes it one of the few parts of the front end that is visible from the saddle, and it is the cheapest way to change how that area looks.\u003c\/p\u003e\u003cp\u003eSeven finishes are offered: silver, black, red, blue, magnesium, gold and purple. It is a service part and works with the Warp 9 Steer Lock kit only, so it is bought as a replacement for a scuffed cap or to recolor a cockpit rather than as a stand-alone upgrade. Keep the original cap if the bike may go back to its earlier look later.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Silver Anodized","offer_id":54475694375222,"sku":"S-STEERCAP-1","price":10.0,"currency_code":"USD","in_stock":true},{"title":"Black Anodized","offer_id":54475694407990,"sku":"S-STEERCAP-2","price":10.0,"currency_code":"USD","in_stock":true},{"title":"Red Anodized","offer_id":54475694440758,"sku":"S-STEERCAP-3","price":10.0,"currency_code":"USD","in_stock":true},{"title":"Blue Anodized","offer_id":54475694473526,"sku":"S-STEERCAP-4","price":10.0,"currency_code":"USD","in_stock":true},{"title":"Magnesium Anodized","offer_id":54475694506294,"sku":"S-STEERCAP-6","price":10.0,"currency_code":"USD","in_stock":true},{"title":"Gold Anodized","offer_id":54475694539062,"sku":"S-STEERCAP-9","price":10.0,"currency_code":"USD","in_stock":true},{"title":"Purple Anodized","offer_id":54475694571830,"sku":"S-STEERCAP-V","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/S-STEERCAP-1.jpg?v=1787785022"},{"product_id":"warp9-e-moto-tapped-handlebar","title":"Warp 9 E-Moto Tapped Handlebar","description":"\u003cp\u003eWarp 9's tapped e-moto handlebar, with the bar ends threaded from the factory so bar-end sliders can be fitted without drilling. That is worth having on a bike that spends time on the ground, since the bar end is what takes the first hit.\u003c\/p\u003e\u003cp\u003eClamp diameter is 31.8mm. Two rises are offered, 80mm or three inches and 40mm or one and a half inches, so the cockpit height can be set to the rider rather than the bike. Grip protectors and the bar-end bolts are included. Eight finishes are available, including white powder coat alongside black, silver, red, blue, magnesium, gold and purple anodizing.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"White Powder Coat \/ 80mm \/ 3.00\"","offer_id":54475705516342,"sku":"SH-31.8-80-0","price":105.0,"currency_code":"USD","in_stock":true},{"title":"White Powder Coat \/ 40mm \/ 1.50\"","offer_id":54475705549110,"sku":"SH-31.8-40-0","price":105.0,"currency_code":"USD","in_stock":true},{"title":"Black Anodized \/ 80mm \/ 3.00\"","offer_id":54475705581878,"sku":"SH-31.8-80-2","price":97.0,"currency_code":"USD","in_stock":true},{"title":"Black Anodized \/ 40mm \/ 1.50\"","offer_id":54475705614646,"sku":"SH-31.8-40-2","price":97.0,"currency_code":"USD","in_stock":true},{"title":"Silver Anodized \/ 80mm \/ 3.00\"","offer_id":54475705647414,"sku":"SH-31.8-80-1","price":97.0,"currency_code":"USD","in_stock":true},{"title":"Silver Anodized \/ 40mm \/ 1.50\"","offer_id":54475705680182,"sku":"SH-31.8-40-1","price":97.0,"currency_code":"USD","in_stock":true},{"title":"Red Anodized \/ 80mm \/ 3.00\"","offer_id":54475705712950,"sku":"SH-31.8-80-3","price":97.0,"currency_code":"USD","in_stock":true},{"title":"Red Anodized \/ 40mm \/ 1.50\"","offer_id":54475705745718,"sku":"SH-31.8-40-3","price":97.0,"currency_code":"USD","in_stock":true},{"title":"Blue Anodized \/ 80mm \/ 3.00\"","offer_id":54475705778486,"sku":"SH-31.8-80-4","price":97.0,"currency_code":"USD","in_stock":true},{"title":"Blue Anodized \/ 40mm \/ 1.50\"","offer_id":54475705811254,"sku":"SH-31.8-40-4","price":97.0,"currency_code":"USD","in_stock":true},{"title":"Magnesium Anodized \/ 80mm \/ 3.00\"","offer_id":54475705844022,"sku":"SH-31.8-80-6","price":97.0,"currency_code":"USD","in_stock":true},{"title":"Magnesium Anodized \/ 40mm \/ 1.50\"","offer_id":54475705876790,"sku":"SH-31.8-40-6","price":97.0,"currency_code":"USD","in_stock":true},{"title":"Gold Anodized \/ 80mm \/ 3.00\"","offer_id":54475705909558,"sku":"SH-31.8-80-9","price":97.0,"currency_code":"USD","in_stock":true},{"title":"Gold Anodized \/ 40mm \/ 1.50\"","offer_id":54475705942326,"sku":"SH-31.8-40-9","price":97.0,"currency_code":"USD","in_stock":true},{"title":"Purple Anodized \/ 80mm \/ 3.00\"","offer_id":54475705975094,"sku":"SH-31.8-80-V","price":97.0,"currency_code":"USD","in_stock":true},{"title":"Purple Anodized \/ 40mm \/ 1.50\"","offer_id":54475706007862,"sku":"SH-31.8-40-V","price":97.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/SH-31.8-80-0.jpg?v=1787785036"},{"product_id":"warp9-talaria-sigma-elite-foot-pegs","title":"Warp 9 Talaria \/ Sigma Elite Foot Pegs","description":"\u003cp\u003eElite foot pegs cut for the Talaria Sting, forged from 7075-T6 aluminum and then CNC machined. The platform measures 3 5\/8 by 2 3\/8 inches, or 89 by 58mm, which is a large step up from a narrow stock peg and makes standing through rough ground far less tiring.\u003c\/p\u003e\u003cp\u003eThey sit 1\/4 inch back from the original peg location and use the stock springs and pivot pins, so nothing else has to be sourced to fit them. The teeth are stainless steel. Eight finishes are offered, including a white powder coat. Titanium replacement teeth and Elite peg sliders are sold separately. Try the position before committing, since a quarter inch back changes the standing stance.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"White Powder Coat","offer_id":54475709612342,"sku":"EP-46-0","price":150.0,"currency_code":"USD","in_stock":true},{"title":"Silver Anodized","offer_id":54475709645110,"sku":"EP-46-1","price":142.0,"currency_code":"USD","in_stock":true},{"title":"Black Anodized","offer_id":54475709677878,"sku":"EP-46-2","price":142.0,"currency_code":"USD","in_stock":true},{"title":"Red Anodized","offer_id":54475709710646,"sku":"EP-46-3","price":142.0,"currency_code":"USD","in_stock":true},{"title":"Blue Anodized","offer_id":54475709743414,"sku":"EP-46-4","price":142.0,"currency_code":"USD","in_stock":true},{"title":"Magnesium Anodized","offer_id":54475709776182,"sku":"EP-46-6","price":142.0,"currency_code":"USD","in_stock":true},{"title":"Gold Anodized","offer_id":54475709808950,"sku":"EP-46-9","price":142.0,"currency_code":"USD","in_stock":true},{"title":"Purple Anodized","offer_id":54475709841718,"sku":"EP-46-V","price":142.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/EP-47-3_23e3a840-4ffe-4ab4-bda2-9a38e729a537.jpg?v=1787785051"},{"product_id":"warp9-e-moto-wheel-bearing-kits-for-warp-9-hubs","title":"E-Moto Wheel Bearing Kits for Warp 9 Hubs","description":"\u003cp\u003eWheel bearing rebuild kits for Warp 9 hubs, sold per wheel and per bike so the right bearing sizes come in one box. Choose front or rear, then the platform: Light Bee, Ultra Bee, Talaria MX3, MX4 and XXX, E-Ride Pro S, SS and 2.0, or the 79BIKE Falcon.\u003c\/p\u003e\u003cp\u003eEach kit contains the bearings, the distance tube and the dust seals, which is everything that comes out of a hub during a bearing change. Replace bearings in pairs rather than one side at a time, and fit new seals with them, since a seal that has been pried out rarely goes back in sealing properly. Front and rear kits use different part numbers, so order by wheel.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Front \/ Light Bee","offer_id":54475710300470,"sku":"REBUILD KIT 122F","price":35.0,"currency_code":"USD","in_stock":true},{"title":"Front \/ Ultra Bee","offer_id":54475710333238,"sku":"REBUILD KIT 124F","price":35.0,"currency_code":"USD","in_stock":true},{"title":"Front \/ MX3\/MX4\/XXX","offer_id":54475710366006,"sku":"REBUILD KIT 122F","price":35.0,"currency_code":"USD","in_stock":true},{"title":"Front \/ Eride Pro S\/SS\/2.0","offer_id":54475710398774,"sku":"REBUILD KIT 122F","price":35.0,"currency_code":"USD","in_stock":true},{"title":"Front \/ 79Bike Falcon","offer_id":54475710431542,"sku":"REBUILD KIT 122F","price":35.0,"currency_code":"USD","in_stock":true},{"title":"Rear \/ Light Bee","offer_id":54475710464310,"sku":"REBUILD KIT 127R","price":35.0,"currency_code":"USD","in_stock":true},{"title":"Rear \/ Ultra Bee","offer_id":54475710497078,"sku":"REBUILD KIT 131R","price":35.0,"currency_code":"USD","in_stock":true},{"title":"Rear \/ MX3\/MX4\/XXX","offer_id":54475710529846,"sku":"REBUILD KIT 129R","price":35.0,"currency_code":"USD","in_stock":true},{"title":"Rear \/ Eride Pro S\/SS\/2.0","offer_id":54475710562614,"sku":"REBUILD KIT 127R","price":35.0,"currency_code":"USD","in_stock":true},{"title":"Rear \/ 79Bike Falcon","offer_id":54475710595382,"sku":"REBUILD KIT 127R","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/R129V3_edited-scaled_611f5717-25ec-477a-bbd7-013b5c16134e.jpg?v=1787785055"},{"product_id":"warp9-warp-9-v3-rotor-hub-spacer","title":"Warp 9 V3 Rotor Hub Spacer","description":"\u003cp\u003eThe adapter that lets a stock Surron rear rotor, which has its own bolt pattern, be used on a Warp 9 V3 hub. It is the part that saves buying a new rotor when a wheel is rebuilt around a Warp 9 hub and the original disc is still in good condition.\u003c\/p\u003e\u003cp\u003eIt works on the front or the rear hub. Check the rotor thickness at the braking surface before reusing it: a disc that has worn below its minimum is the usual reason a brake feels vague even with new pads, and it is worth finding out before the wheel is laced rather than after. Torque the rotor bolts in a cross pattern.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475711250742,"sku":"S-HUBSPACER-V3","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/S-HUBSPACER-V32_3a5a2f53-ee6d-47f2-82f8-ce749078a3d7.jpg?v=1787785060"},{"product_id":"warp9-bar-straps","title":"Warp 9 Bar Straps","description":"\u003cp\u003eA set of reusable rubber straps for tidying cables, wiring and brake hoses on the handlebars. They do the job zip ties do, except they can be adjusted and opened again, which matters on a part of the bike that gets taken apart often.\u003c\/p\u003e\u003cp\u003eEach kit contains four straps: two standard and two adjustable length, so the same kit covers a thin throttle cable and a thicker brake hose bundle. They replace stock part numbers 01609630, 44011076200, 60011093045, 60011093075, 60011093060 and STD-RB-0007. Route the brake hose with enough slack for full steering lock before pulling any of them tight.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475712201014,"sku":"MH-BARSTRAPS-2","price":11.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/MH-BARSTRAPS-21.jpg?v=1787785068"},{"product_id":"warp9-shock-cover","title":"Warp 9 Shock Cover","description":"\u003cp\u003eA neoprene cover that wraps around the rear shock and keeps mud, rocks and trail debris off the shock shaft. A scored shaft tears seals and turns into a leaking shock, so this is a cheap part that protects an expensive one.\u003c\/p\u003e\u003cp\u003eThe neoprene is 4mm thick for abrasion and impact resistance, and it is cut for e-moto shocks with a 10.5 inch bolt-to-bolt length. The split-back Velcro closure means the shock does not have to come out of the bike to fit it: wrap it around, close the Velcro and it is done. Measure your shock bolt to bolt before ordering, and pull the cover off to rinse behind it after muddy rides.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475712233782,"sku":"S-SHOCKCOVER-2","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/S-SHOCKCOVER-21.jpg?v=1787785068"},{"product_id":"warp9-emoto-rotors-rear","title":"Warp 9 Emoto Rotors - Rear","description":"\u003cp\u003eThe rear half of Warp 9's e-moto rotor range, from a 203mm fixed disc up to a 300mm floater, with fixed and floating options depending on diameter. A larger rear rotor mostly buys consistency on long descents rather than outright stopping power, since the rear tire runs out of grip first.\u003c\/p\u003e\u003cp\u003eRotors are listed separately for stock hubs and for Warp 9 hubs, so match the hub before matching the size. Going up in diameter needs a caliper adapter to reposition the caliper, and the rear caliper bracket is not interchangeable with the front. Check chain and swingarm clearance on the larger sizes, then bed the new rotor and pads in gradually.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"203mm FIXED \/ OEM \/ S-R203-OEM","offer_id":54475712463158,"sku":"S-R203-OEM","price":45.0,"currency_code":"USD","in_stock":true},{"title":"203mm FIXED \/ Warp 9 \/ S-FR203","offer_id":54475712495926,"sku":"S-FR203","price":45.0,"currency_code":"USD","in_stock":true},{"title":"220mm FLOATING \/ OEM \/ S-R220-B2.3-OEM","offer_id":54475712528694,"sku":"S-R220-B2.3-OEM","price":69.0,"currency_code":"USD","in_stock":true},{"title":"220mm FLOATING \/ OEM \/ T-SR220-F-B2.3-OEM","offer_id":54475712561462,"sku":"T-SR220-F-B2.3-OEM","price":69.0,"currency_code":"USD","in_stock":true},{"title":"220mm FLOATING \/ Warp 9 \/ S-FR220-B2.3","offer_id":54475712594230,"sku":"S-FR220-B2.3","price":69.0,"currency_code":"USD","in_stock":true},{"title":"240mm FIXED \/ OEM \/ RO-114","offer_id":54475712626998,"sku":"RO-114","price":69.0,"currency_code":"USD","in_stock":true},{"title":"240mm FIXED \/ Warp 9 \/ RO-114","offer_id":54475712659766,"sku":"RO-114","price":69.0,"currency_code":"USD","in_stock":true},{"title":"240mm FLOATING \/ OEM \/ S-UL240F","offer_id":54475712692534,"sku":"S-UL240F","price":79.0,"currency_code":"USD","in_stock":true},{"title":"240mm FLOATING \/ Warp 9 \/ S-UL240F","offer_id":54475712725302,"sku":"S-UL240F","price":79.0,"currency_code":"USD","in_stock":true},{"title":"260mm FLOATING \/ OEM \/ S-UL260FR","offer_id":54475712758070,"sku":"S-UL260FR","price":109.0,"currency_code":"USD","in_stock":true},{"title":"260mm FLOATING \/ Warp 9 \/ S-UL260FR","offer_id":54475712790838,"sku":"S-UL260FR","price":109.0,"currency_code":"USD","in_stock":true},{"title":"300mm FLOATING \/ OEM \/ RO-F1295","offer_id":54475712823606,"sku":"RO-F1295","price":109.0,"currency_code":"USD","in_stock":true},{"title":"300mm FLOATING \/ Warp 9 \/ RO-F1295","offer_id":54475712856374,"sku":"RO-F1295","price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/S-FR220-B2-1.jpg?v=1787785070"},{"product_id":"warp9-emoto-rotors-front","title":"Warp 9 Emoto Rotors - Front","description":"\u003cp\u003eWarp 9's front rotor range for lightweight e-moto bikes, running from a 203mm fixed disc up to a 300mm floater. Smaller sizes are offered fixed, larger sizes floating, so the choice narrows once the diameter is picked.\u003c\/p\u003e\u003cp\u003eSelect the hub fitment as well as the size: rotors are listed for both stock hubs and Warp 9 hubs, and the two bolt patterns are not interchangeable. Anything larger than the diameter the fork was built around needs a matching caliper adapter to move the caliper outward, so budget for that in the same order. Bed new rotors and pads in gently over the first several stops before leaning on them.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"203mm FIXED \/ OEM \/ S-FR203","offer_id":54475713315126,"sku":"S-FR203","price":45.0,"currency_code":"USD","in_stock":true},{"title":"203mm FIXED \/ Warp 9 \/ S-FR203","offer_id":54475713347894,"sku":"S-FR203","price":45.0,"currency_code":"USD","in_stock":true},{"title":"220mm FIXED \/ OEM \/ S-FR220","offer_id":54475713380662,"sku":"S-FR220","price":50.0,"currency_code":"USD","in_stock":true},{"title":"240mm FIXED \/ OEM \/ RO-114","offer_id":54475713413430,"sku":"RO-114","price":49.0,"currency_code":"USD","in_stock":true},{"title":"240mm FIXED \/ Warp 9 \/ RO-114","offer_id":54475713446198,"sku":"RO-114","price":49.0,"currency_code":"USD","in_stock":true},{"title":"220mm FLOATING \/ OEM \/ S-FR220-B2.3","offer_id":54475713478966,"sku":"S-FR220-B2.3","price":69.0,"currency_code":"USD","in_stock":true},{"title":"220mm FLOATING \/ Warp 9 \/ S-FR220-B2.3","offer_id":54475713511734,"sku":"S-FR220-B2.3","price":69.0,"currency_code":"USD","in_stock":true},{"title":"240mm FLOATING \/ OEM \/ S-UL240F","offer_id":54475713544502,"sku":"S-UL240F","price":79.0,"currency_code":"USD","in_stock":true},{"title":"240mm FLOATING \/ Warp 9 \/ S-UL240F","offer_id":54475713577270,"sku":"S-UL240F","price":79.0,"currency_code":"USD","in_stock":true},{"title":"260mm FLOATING \/ OEM \/ S-UL260FR","offer_id":54475713610038,"sku":"S-UL260FR","price":109.0,"currency_code":"USD","in_stock":true},{"title":"260mm FLOATING \/ Warp 9 \/ S-UL260FR","offer_id":54475713642806,"sku":"S-UL260FR","price":109.0,"currency_code":"USD","in_stock":true},{"title":"300mm FLOATING \/ OEM \/ RO-F1295","offer_id":54475713675574,"sku":"RO-F1295","price":109.0,"currency_code":"USD","in_stock":true},{"title":"300mm FLOATING \/ Warp 9 \/ RO-F1295","offer_id":54475713708342,"sku":"RO-F1295","price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/S-FR220-B2_220MM_FLOATING_FRONT_AND_REAR_add2850b-1681-41a7-b740-2a37fb95df51.jpg?v=1787785071"},{"product_id":"warp9-standard-stem-lock-for-forks-that-already-have-a-fender-mounting-solution","title":"Warp 9 Standard Stem Lock - For forks that already have a fender mounting solution.","description":"\u003cp\u003eA stem lock for forks whose lower clamps already provide a fender mount. Because the fender mounting is handled by the fork, this version is smaller and simpler at the bottom than the fender-mount stem lock, and it leaves more clearance around the fender itself.\u003c\/p\u003e\u003cp\u003eHead bearings that keep coming loose are usually a symptom of the original star nut walking up the steering tube. This kit replaces that with a threaded rod running the full length of the steering tube, clamping the lower triple clamp to the upper one so the bearing preload holds. Four black steering tube spacers are included, in 20mm, 15mm, 5mm and 3mm. Use a 3\/8 drive on the bottom nut and a Torx on the top bolt.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Black","offer_id":54475718328630,"sku":"S-NFSTEERLOCK-2","price":39.0,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":54475718361398,"sku":"S-NFSTEERLOCK-3","price":39.0,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":54475718394166,"sku":"S-NFSTEERLOCK-4","price":39.0,"currency_code":"USD","in_stock":true},{"title":"Gold","offer_id":54475718426934,"sku":"S-NFSTEERLOCK-9","price":39.0,"currency_code":"USD","in_stock":true},{"title":"Magnesium","offer_id":54475718459702,"sku":"S-NFSTEERLOCK-6","price":39.0,"currency_code":"USD","in_stock":true},{"title":"Purple","offer_id":54475718492470,"sku":"S-NFSTEERLOCK-V","price":39.0,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":54475718525238,"sku":"S-NFSTEERLOCK-1","price":39.0,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":54475718558006,"sku":"S-NFSTEERLOCK-0","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/S-NFSTEERLOCK-2-720x540.jpg?v=1787785080"},{"product_id":"warp9-titanium-elite-foot-peg-screws","title":"Warp 9 Titanium Elite Foot Peg Screws","description":"\u003cp\u003eOptional titanium traction screws for Warp 9 Elite foot pegs. Titanium holds a sharp edge longer than the standard stainless screws, which matters because the teeth are what stop a wet boot sliding off the peg. Thread size is M5 x 0.8 x 10mm and 26 pieces are supplied, which includes two spares.\u003c\/p\u003e\u003cp\u003eTwo styles are offered. The set screw style gives the most grip, roughly 20 percent more than the Torx style, and comes with an Allen wrench and blue thread locker. The Torx style comes with a double-ended wrench for the Torx section and its 6mm base. They fit Warp 9 Elite pegs only, the ones whose part numbers start with EP.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Black Anodized \/ Torx","offer_id":54475718689078,"sku":"EP-TORXSCREW-2","price":59.0,"currency_code":"USD","in_stock":true},{"title":"Black Anodized \/ Set Screw","offer_id":54475718721846,"sku":"EP-PEGSCREW-2","price":59.0,"currency_code":"USD","in_stock":true},{"title":"Blue Powder Coat \/ Torx","offer_id":54475718754614,"sku":"EP-TORXSCREW-B","price":59.0,"currency_code":"USD","in_stock":true},{"title":"Blue Powder Coat \/ Set Screw","offer_id":54475718787382,"sku":"EP-PEGSCREW-B","price":59.0,"currency_code":"USD","in_stock":true},{"title":"Green Anodized \/ Torx","offer_id":54475718820150,"sku":"EP-TORXSCREW-7","price":59.0,"currency_code":"USD","in_stock":true},{"title":"Green Anodized \/ Set Screw","offer_id":54475718852918,"sku":"EP-PEGSCREW-7","price":59.0,"currency_code":"USD","in_stock":true},{"title":"Gold Anodized \/ Torx","offer_id":54475718885686,"sku":"EP-TORXSCREW-9","price":59.0,"currency_code":"USD","in_stock":true},{"title":"Gold Anodized \/ Set Screw","offer_id":54475718918454,"sku":"EP-PEGSCREW-9","price":59.0,"currency_code":"USD","in_stock":true},{"title":"Purple Anodized \/ Torx","offer_id":54475718951222,"sku":"EP-TORXSCREW-V","price":59.0,"currency_code":"USD","in_stock":true},{"title":"Purple Anodized \/ Set Screw","offer_id":54475718983990,"sku":"EP-PEGSCREW-V","price":59.0,"currency_code":"USD","in_stock":true},{"title":"Silver Anodized \/ Torx","offer_id":54475719016758,"sku":"EP-TORXSCREW-1","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/EP-TORXSCREW-Bf_f16b654e-507d-47fd-a40d-9a789a82430a.jpg?v=1787785085"},{"product_id":"warp9-talaria-extension-wire","title":"Warp 9 Talaria Extension Wire","description":"\u003cp\u003eA three inch throttle extension cable. Warp 9 lists it against a specific symptom: error code 37 appearing after taller bars or taller bar mounts have been fitted, which is caused by the throttle cable pulling its own plug apart as the bars rise.\u003c\/p\u003e\u003cp\u003eIf the bike threw code 37 immediately after a cockpit change, this is usually the fix, and it is a far cheaper first thing to try than a throttle or a controller. Warp 9 lists it as fitting the Talaria XXX and the Talaria R-MX4. Route the extra length so it is not pinched at full steering lock, and cable-tie it clear of the fork before riding.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475748278582,"sku":"T-XXX-EXT-WIRE","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/T-XXX-EXT-WIRE-1-scaled.jpg?v=1787785110"},{"product_id":"warp9-helmet-hook","title":"Warp 9 Helmet Hook","description":"\u003cp\u003eA machined aluminum hook that clamps to the handlebar and gives a helmet somewhere to hang while the bike is parked. It is a small part that saves an expensive one, since a helmet balanced on a seat or a bar end usually ends up on the ground.\u003c\/p\u003e\u003cp\u003eIt is machined from 7075-T6 aluminum and clamps to 7\/8 inch handlebars. Two stainless screws are included. Warp 9 recommends fitting it on the kickstand side of the bars, so the weight of the helmet pulls toward the side the bike is already leaning on rather than against it. Check lever and control clearance before tightening it down.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475748344118,"sku":"S-HELMETHOOK-2","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/S-HELMENTHOOK-2-un-mounted_ddcac58c-243c-4aa3-958d-54effff2b38e.jpg?v=1787785111"},{"product_id":"warp9-titanium-stem-lock-replacement-bolt","title":"Warp 9 Titanium Stem Lock Replacement Bolt","description":"\u003cp\u003eThe titanium version of the bolt that comes in the Warp 9 stem lock kit, replacing the aluminum one. It is the stronger option and it will not rust or corrode, which matters because this bolt runs down inside the steering tube where water collects and sits.\u003c\/p\u003e\u003cp\u003eIt is a service part and works only with the Warp 9 stem lock kit, so it is bought to upgrade or replace rather than as a stand-alone item. If the rest of the bike is being built with titanium hardware, this is the piece that finishes the steering stem. Anti-seize on the lower threads is worth using, as with the aluminum bolt it replaces.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475748606262,"sku":"S-TI-STEERBOLT-B","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/IMG-1273.jpg?v=1787785112"},{"product_id":"warp9-e-moto-titanium-sprocket-bolts","title":"Warp 9 E-Moto Titanium Sprocket Bolts","description":"\u003cp\u003eTitanium bolts for the rear sprocket on lightweight e-moto bikes, cut for the common sprocket pattern shared across the Surron, Talaria, E-Ride Pro, 79BIKE and Rawrr platforms. They replace the steel hardware that holds the sprocket to the carrier.\u003c\/p\u003e\u003cp\u003eSprocket bolts live directly behind the rear wheel and take everything the tire throws forward, so steel ones rust and seize while the sprocket is still good. Titanium avoids that. They are worth fitting at the same time as a sprocket change rather than as a separate job, since the sprocket has to come off either way. Torque them in a cross pattern and recheck after the first ride.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475755127094,"sku":"S-TIRSBOLT-B","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/S-TISBOLT-B-kit-scaled.jpg?v=1787785115"},{"product_id":"warp9-talaria-sigma-foot-pegs","title":"Warp 9 Talaria \/ Sigma Foot Pegs","description":"\u003cp\u003eForged 7075-T6 foot pegs for the Talaria Sting and the Altis Sigma, with an extra wide platform measuring 57mm across and 87mm long. The Y bridge in the middle adds four center teeth where most pegs leave a bare gap, which is exactly where a boot sits when standing straight up.\u003c\/p\u003e\u003cp\u003eThe teeth are stainless steel and permanent rather than replaceable. They use the original spring and pin, so fitting needs nothing extra, and they work with Warp 9 supermoto peg sliders. Eight finishes are offered, including a white powder coat. Warp 9 backs them with a lifetime warranty: break or crack a peg and it is replaced.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Black","offer_id":54475785208118,"sku":"T-PEG-2","price":109.0,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":54475785240886,"sku":"T-PEG-3","price":109.0,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":54475785273654,"sku":"T-PEG-4","price":109.0,"currency_code":"USD","in_stock":true},{"title":"Magnesium","offer_id":54475785306422,"sku":"T-PEG-6","price":109.0,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":54475785339190,"sku":"T-PEG-0","price":117.0,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":54475785371958,"sku":"T-PEG-1","price":109.0,"currency_code":"USD","in_stock":true},{"title":"Purple","offer_id":54475785404726,"sku":"T-PEG-V","price":109.0,"currency_code":"USD","in_stock":true},{"title":"Gold","offer_id":54475785437494,"sku":"T-PEG-9","price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/20210416_162559_170ebf28-d3f8-4e8a-b498-d737853144fb.jpg?v=1787785400"},{"product_id":"warp9-jack-shaft-sprocket","title":"Warp 9 Jack Shaft Sprocket","description":"\u003cp\u003eThe front jack shaft sprocket, made from hardened tool steel and black oxide coated so it lasts longer than the sprocket it replaces. It is offered in two sizes, and one tooth at the front changes gearing more than one tooth at the rear does.\u003c\/p\u003e\u003cp\u003eFourteen tooth is the stock size and a straight replacement for a worn original. Fifteen tooth raises top speed and extends range by dropping motor rpm at a given speed, at the cost of low-end torque, which suits open riding more than tight, steep ground. Check the chain has enough adjustment left before changing sizes, and inspect the rear sprocket at the same time.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"15 tooth","offer_id":54475785470262,"sku":"S-XCS420-15","price":22.0,"currency_code":"USD","in_stock":true},{"title":"14 tooth","offer_id":54475785503030,"sku":"S-XCS420-14","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/S-XCS420-15-15-TOOTH-JACK-SHAFT-SPROCKET.jpg?v=1787785401"},{"product_id":"warp9-bar-mount","title":"Warp 9 Bar Mount","description":"\u003cp\u003eThe Transformer direct bar mount stem, CNC machined from 7075-T6 aluminum. It moves the handlebars 10mm forward and sits at stock height in the low position, with a spacer in the box to gain 20mm of height. Bolts for both configurations are included, so the cockpit can be changed later without buying more parts.\u003c\/p\u003e\u003cp\u003eIt fits 31.8mm bars, stock or Warp 9, and 28.6mm MX bars using the supplied shims. It also fits Fox, Manitou, EXT MX, RST, DNM, DVO and KKE forks with a standard four bolt downhill top triple clamp. Once the original steer bar mount comes off, steer tube spacers are needed to take up the difference; the Warp 9 stem lock includes them, or they can be sourced separately.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Silver","offer_id":54475785535798,"sku":"S-BARCLAMP-1","price":109.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":54475785568566,"sku":"S-BARCLAMP-2","price":109.0,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":54475785601334,"sku":"S-BARCLAMP-3","price":109.0,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":54475785634102,"sku":"S-BARCLAMP-4","price":109.0,"currency_code":"USD","in_stock":true},{"title":"Magnesium","offer_id":54475785666870,"sku":"S-BARCLAMP-6","price":109.0,"currency_code":"USD","in_stock":true},{"title":"Gold","offer_id":54475785699638,"sku":"S-BARCLAMP-9","price":109.0,"currency_code":"USD","in_stock":true},{"title":"Purple","offer_id":54475785732406,"sku":"S-BARCLAMP-V","price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/20220715_085118_edited-scaled.jpg?v=1787785402"},{"product_id":"warp9-stem-lock-w9-fender-adapter-compatible-for-forks-without-a-fender-mount-on-lower-clamps","title":"Warp 9 Stem Lock - W9 Fender Adapter Compatible - For forks without a fender mount on lower clamps.","description":"\u003cp\u003eA stem lock for forks whose lower clamps do not provide a fender mount. Its lower machined retaining nut carries two 5mm threads, so a fender can be mounted from the stem lock itself using the Warp 9 fender adapter.\u003c\/p\u003e\u003cp\u003eHead bearings that will not stay tight are usually the original star nut walking up the steering tube. This kit replaces that with a threaded rod running the full length of the steering tube, compressing the lower triple clamp against the upper one so preload holds. Four black steering tube height spacers are included, in 20mm, 15mm, 5mm and 3mm sizes. Six anodized finishes are offered.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Black","offer_id":54475785765174,"sku":"S-STEERLOCK-2","price":39.0,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":54475785797942,"sku":"S-STEERLOCK-3","price":39.0,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":54475785830710,"sku":"S-STEERLOCK-4","price":39.0,"currency_code":"USD","in_stock":true},{"title":"Magnesium","offer_id":54475785863478,"sku":"S-STEERLOCK-6","price":39.0,"currency_code":"USD","in_stock":true},{"title":"Gold","offer_id":54475785896246,"sku":"S-STEERLOCK-9","price":39.0,"currency_code":"USD","in_stock":true},{"title":"Purple","offer_id":54475785929014,"sku":"S-STEERLOCK-V","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/20220412_083511.jpg?v=1787785403"},{"product_id":"warp9-e-moto-31-8mm-handlebars","title":"Warp 9 E-Moto 31.8mm Handlebars","description":"\u003cp\u003eWarp 9's own e-moto handlebar, tapered so the center section is thicker and the ends are thinner. That gives a bar that is strong where it is clamped and still has some flex at the grips, which is what keeps a stiff bar from beating up your hands on a long ride.\u003c\/p\u003e\u003cp\u003eThe clamp diameter is 31.8mm, width is 770mm, rise is 80mm or three inches, back sweep is 9 degrees and up sweep is 5 degrees. The material is 7075-T7 aluminum. The clamping area is fully bead blasted for grip inside the clamp and a durable finish outside it, the logo is lasered on, and centering and alignment marks are lasered into the bar so it can be set square. Eight finishes are offered.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"White","offer_id":54475785961782,"sku":"S-HBAR-0","price":95.0,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":54475785994550,"sku":"S-HBAR-1","price":87.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":54475786027318,"sku":"S-HBAR-2","price":87.0,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":54475786060086,"sku":"S-HBAR-3","price":87.0,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":54475786092854,"sku":"S-HBAR-4","price":87.0,"currency_code":"USD","in_stock":true},{"title":"Magnesium","offer_id":54475786125622,"sku":"S-HBAR-6","price":87.0,"currency_code":"USD","in_stock":true},{"title":"Gold","offer_id":54475786158390,"sku":"S-HBAR-9","price":87.0,"currency_code":"USD","in_stock":true},{"title":"Purple","offer_id":54475786191158,"sku":"S-HBAR-V","price":87.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/S-HBAR-2-CENTER.jpg?v=1787785404"},{"product_id":"warp9-titanium-fork-bolts","title":"Warp 9 Titanium Fork Bolts","description":"\u003cp\u003eTitanium pinch and cap bolts for the front end, cut to suit four of the common fork options fitted to e-moto bikes: the Fox 40, KKE, DNM and Fastace ALX13RC. Choose the fork rather than the bike, since the hardware follows the fork.\u003c\/p\u003e\u003cp\u003eFork bolts are worth having in titanium because they sit at the front of the bike taking spray and are removed regularly for fork service and wheel changes, so plated steel ones corrode and then round out. Titanium does not rust. Torque pinch bolts to the fork manufacturer's figure and in the specified sequence, since over-tightening a pinch bolt can distort a fork lower.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Fox 40","offer_id":54475786453302,"sku":"S-TI-FOX40-B","price":39.0,"currency_code":"USD","in_stock":true},{"title":"KKE","offer_id":54475786486070,"sku":"S-TI-DNM-B","price":99.0,"currency_code":"USD","in_stock":true},{"title":"DNM","offer_id":54475786518838,"sku":"S-TI-DNM-B","price":99.0,"currency_code":"USD","in_stock":true},{"title":"Fastace ALX13RC","offer_id":54475786551606,"sku":"TI-FASTACE-B","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/20220922_142741-002_edited-1.jpg?v=1787785409"},{"product_id":"warp9-e-moto-sprocket","title":"Warp 9 E-Moto Sprocket","description":"\u003cp\u003eWarp 9's core rear sprocket for e-moto bikes, offered in aluminum or stainless steel across a wide run of tooth counts. Aluminum saves rotating weight at the outside of the wheel, where weight costs the most; stainless steel lasts considerably longer before the teeth hook over.\u003c\/p\u003e\u003cp\u003eTooth counts run from 40 up to 64. Fewer teeth raise top speed and lose low-end pull, more teeth do the reverse, which is why riders often keep two on the shelf and swap by terrain. Seven anodized finishes are offered plus an unfinished option. Extra chain links are not included, so a large jump in tooth count may need a longer chain as well as the sprocket.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Aluminum \/ 40 TOOTH \/ Black Anodized","offer_id":54475787043126,"sku":"S-RSPRO-40","price":42.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 42 TOOTH \/ Black Anodized","offer_id":54475787075894,"sku":"S-RSPRO-42","price":44.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 48 TOOTH \/ Red Anodized","offer_id":54475787108662,"sku":"S-RSPRO-48-3A","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 48 TOOTH \/ Black Anodized","offer_id":54475787141430,"sku":"S-RSPRO-48","price":48.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 48 TOOTH \/ Magnesium Anodized","offer_id":54475787174198,"sku":"S-RSPRO-48-6A","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 48 TOOTH \/ Purple Anodized","offer_id":54475787206966,"sku":"S-RSPRO-48-VA","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 48 TOOTH \/ Gold Anodized","offer_id":54475787239734,"sku":"S-RSPRO-48-9A","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 48 TOOTH \/ Blue Anodized","offer_id":54475787272502,"sku":"S-RSPRO-48-4A","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 50 TOOTH \/ Black Anodized","offer_id":54475787305270,"sku":"S-RSPRO-50","price":50.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 52 TOOTH \/ Black Anodized","offer_id":54475787338038,"sku":"S-RSPRO-52","price":53.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 54 TOOTH \/ Red Anodized","offer_id":54475787370806,"sku":"S-RSPRO-54-3A","price":63.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 54 TOOTH \/ Black Anodized","offer_id":54475787403574,"sku":"S-RSPRO-54","price":56.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 54 TOOTH \/ Magnesium Anodized","offer_id":54475787436342,"sku":"S-RSPRO-54-6A","price":63.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 54 TOOTH \/ Purple Anodized","offer_id":54475787469110,"sku":"S-RSPRO-54-VA","price":63.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 54 TOOTH \/ Gold Anodized","offer_id":54475787501878,"sku":"S-RSPRO-54-9A","price":63.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 54 TOOTH \/ Blue Anodized","offer_id":54475787534646,"sku":"S-RSPRO-54-4A","price":63.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 58 TOOTH \/ Red Anodized","offer_id":54475787567414,"sku":"S-RSPRO-58-3A","price":67.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 58 TOOTH \/ Black Anodized","offer_id":54475787600182,"sku":"S-RSPRO-58","price":60.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 58 TOOTH \/ Magnesium Anodized","offer_id":54475787632950,"sku":"S-RSPRO-58-6A","price":67.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 58 TOOTH \/ Purple Anodized","offer_id":54475787665718,"sku":"S-RSPRO-58-VA","price":67.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 58 TOOTH \/ Gold Anodized","offer_id":54475787698486,"sku":"S-RSPRO-58-9A","price":67.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 58 TOOTH \/ Blue Anodized","offer_id":54475787731254,"sku":"S-RSPRO-58-4A","price":67.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 60 TOOTH \/ Black Anodized","offer_id":54475787764022,"sku":"S-RSPRO-60","price":62.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 62 TOOTH \/ Black Anodized","offer_id":54475787796790,"sku":"S-RSPRO-62","price":66.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 64 TOOTH \/ Black Anodized","offer_id":54475787829558,"sku":"S-RSPRO-64","price":68.0,"currency_code":"USD","in_stock":true},{"title":"Stainless steel \/ 54 TOOTH \/ Unfinished","offer_id":54475787862326,"sku":"S-SS-RSPRO-54","price":35.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 52 TOOTH \/ Red Anodized","offer_id":54475787895094,"sku":"S-RSPRO-52-3A","price":60.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 52 TOOTH \/ Blue Anodized","offer_id":54475787927862,"sku":"S-RSPRO-52-4A","price":60.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 52 TOOTH \/ Gold Anodized","offer_id":54475787960630,"sku":"S-RSPRO-52-9A","price":60.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 52 TOOTH \/ Magnesium Anodized","offer_id":54475787993398,"sku":"S-RSPRO-52-6A","price":60.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 52 TOOTH \/ Purple Anodized","offer_id":54475788026166,"sku":"S-RSPRO-52-VA","price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/42-TOOTH-S-RSPRO-42.jpg?v=1787785412"},{"product_id":"warp9-titanium-pro-rim-locks","title":"Warp 9 Titanium Pro Rim Locks","description":"\u003cp\u003eRim locks developed with ice track, dirt track and flat track racing in mind, where a tire creeping on the rim ruins a run. The body is forged aluminum, the main bolt is burnt titanium, and the tower nut and base washer are black 7075-T6.\u003c\/p\u003e\u003cp\u003eThe base washer is machined to match the curvature of each specific rim rather than being a flat generic part, which is what gives it a proper seat. Warp 9 rates them at about half the weight of the rim locks they replace, and gives figures per size: 1.8 oz at 1.60 inch, 2.0 oz at 1.85, 2.3 oz at 2.15, 2.7 oz at 2.50 and 3.10 oz at 3.00. Six rim widths are offered from 1.40 to 3.00 inch.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"1.40\" rim width","offer_id":54475788091702,"sku":"RL-140","price":24.0,"currency_code":"USD","in_stock":true},{"title":"1.60\" rim width","offer_id":54475788124470,"sku":"RL-160","price":24.0,"currency_code":"USD","in_stock":true},{"title":"1.85\" rim width","offer_id":54475788157238,"sku":"RL-185","price":24.0,"currency_code":"USD","in_stock":true},{"title":"2.15\" rim width","offer_id":54475788190006,"sku":"RL-215","price":24.0,"currency_code":"USD","in_stock":true},{"title":"2.50\" rim width","offer_id":54475788222774,"sku":"RL-250","price":24.0,"currency_code":"USD","in_stock":true},{"title":"3.00\" rim width","offer_id":54475788255542,"sku":"RL-300","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/20180913_073235_edited_edited.jpg?v=1787785415"},{"product_id":"warp9-stem-lock-replacement-bolt","title":"Warp 9 Stem Lock Replacement Bolt","description":"\u003cp\u003eThe replacement bolt for a Warp 9 Stem Lock, updated with a Torx T45 head in place of the hex head used on the earlier design. A Torx socket grips the whole head rather than six corners, which is what keeps it from rounding out on a bolt that is torqued and then left alone for a season.\u003c\/p\u003e\u003cp\u003eIt is machined from 7075-T6 aluminum and black anodized. It is a service part and works with the Warp 9 Steer Lock kit only. Warp 9 recommends anti-seize on the bottom inch of the threads, which is worth doing: an aluminum bolt threaded into a steering tube that sees water is the classic place for a seized fastener.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475788353846,"sku":"S-STEERBOLT-T45","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/S-STEERBOLT-T45-002_edited-scaled.jpg?v=1787785417"},{"product_id":"warp9-e-bike-front-fender-adapter","title":"Warp 9 E-Bike Front Fender Adapter","description":"\u003cp\u003eAn adapter that lets a stock style Surron front fender bolt to a Warp 9 stem lock. It solves the gap left when the original fender mounting is removed as part of a front end change, so the fender can go back on rather than being left off.\u003c\/p\u003e\u003cp\u003eTwo tapered head screws are included to fasten the adapter to the stem lock. The fender itself mounts to the adapter using the original fender bolts, which are three M6 x 16mm bolts with three M6 washers of 10mm outside diameter, so keep those when the fender comes off. It works only with the Warp 9 stem lock, and it will not work on conventional forks with a cross brace such as Fox 40, RST or DVO.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475788484918,"sku":"S-FENDERBRACKET","price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/surron-fender-bracket1.jpg?v=1787785422"},{"product_id":"warp9-front-wheel-boost-spacer","title":"Warp 9 Front Wheel Boost Spacer","description":"\u003cp\u003eA 5mm boost spacer for the front wheel, used when a wide downhill fork puts the hub flange out of line with the rotor. Warp 9 lists it against forks including the Fox 40, EXT Ferro and Manitou Dorado, though it is not limited to those.\u003c\/p\u003e\u003cp\u003eSix M5 x 16mm steel bolts are included, with button head Torx 25 drive and blue thread locker already applied. Burnt blue titanium bolts are available separately under part number S-TI-BOOST5MM-B. Check rotor to caliper alignment after fitting, since moving the rotor 5mm outboard is the whole point of the part and the caliper has to follow it.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475788583222,"sku":"S-BOOST5MM-2","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/S-BOOST5MM-2-scaled.jpg?v=1787785423"},{"product_id":"warp9-talaria-titanium-bolt-linkage-kit","title":"Warp 9 Talaria Titanium Bolt Linkage Kit","description":"\u003cp\u003eThe complete titanium rear linkage bolt kit for the Talaria Sting and Sting R 4MX. The bolts are fully shanked, so no threaded section bears against the frame or swingarm and cuts into it over time, which is what the original bolts eventually do.\u003c\/p\u003e\u003cp\u003eFive bolts are included: linkage to swingarm and linkage to shock, each with a Fuji lock nut, the upper shock to frame bolt, and lower triangle to linkage and lower triangle to frame bolts, each with a Fuji lock nut. Titanium will not rust or corrode. Since the whole linkage has to come apart to fit these, clean and grease the bearings at the same time rather than making it a second job.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475788648758,"sku":"T-TI-STINGLINKAGE-B","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/T-TI-STINGLINKAGE-B-KIT-1-scaled.jpg?v=1787785427"},{"product_id":"warp9-talaria-sting-rear-axle-with-nut","title":"Warp 9 Talaria Sting Rear Axle With Nut","description":"\u003cp\u003eA titanium rear axle for the Talaria Sting that is both stronger and lighter than the steel axle it replaces. Warp 9 gives the weights directly: 175 grams for the original against 103 grams for this one, so it is about 45 percent lighter.\u003c\/p\u003e\u003cp\u003eThe finish is burnt blue anodized and a black anodized Fuji lock nut is included. Titanium will not rust or corrode, which matters on an axle that gets washed and then left in a damp garage until the next ride. It works with the stock axle blocks and with the Warp 9 Talaria Sting Lockdown axle blocks. Recheck chain tension and wheel alignment after fitting.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475788779830,"sku":"T-TI-RSTINGAXLE-B","price":165.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/20230321_143249_edited_edited-scaled.jpg?v=1787785428"},{"product_id":"warp9-talaria-sting-lockdown-axle-blocks","title":"Warp 9 Talaria Sting Lockdown Axle Blocks","description":"\u003cp\u003eAxle blocks for the Talaria Sting that make chain adjustment repeatable and wheel removal simpler. The steel axle bolt backing plate is cut to insert into the axle, which stops the axle turning, so the wheel comes out with a 17mm wrench alone rather than a wrench plus an Allen key in the other hand.\u003c\/p\u003e\u003cp\u003eThe captive adjustment bolts are titanium and 10mm. Being captive, turning the bolt moves the block both forward and back with no play between bolt and block, which is what makes small chain adjustments precise. One block stays put when the axle is pulled instead of dropping in the dirt. They work with the stock Sting axle and the Warp 9 titanium axle. The axle is not included.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475789041974,"sku":"T-AXLEBLOCK-STEEL","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/T-AXLEBLOCK-STEEL-1-scaled.jpg?v=1787785434"},{"product_id":"warp9-talaria-disk-guard","title":"Warp 9 Talaria Disk Guard","description":"\u003cp\u003eA guard for the exposed rear brake rotor on the Talaria Sting, cut larger than most so it covers both the 203mm stock disc and a 220mm upgrade. The rear rotor is thin and sits low, which is why rocks and stumps find it first.\u003c\/p\u003e\u003cp\u003eSpacers and longer bolts are included to relocate the caliper for a 220mm rotor. The rear spacer catch is slot cut, so the rear wheel comes out without fully removing the guard. Warp 9 lists it as fitting the stock Sting calipers plus Magura MT7 and MT5, Hope V4 and Hayes Dominion brakes. It fits the Talaria Sting only and will not fit a Surron.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475789074742,"sku":"T-RDISKGUARD-2","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/front-side-with-spacers.jpg?v=1787785434"},{"product_id":"warp9-e-moto-handguard-titanium-bolt-kit","title":"Warp 9 E-Moto Handguard Titanium Bolt Kit","description":"\u003cp\u003eThe titanium hardware kit for Warp 9 handguards, finished in burnt blue. It replaces the steel bolts the guards come with, which are the fasteners most exposed to weather and to the ground when the bike goes over.\u003c\/p\u003e\u003cp\u003eThe kit contains four pinch bolts and two button bolts for the plastic flag. It is made for Warp 9 handguards and is bought alongside them rather than instead of the guards. Titanium does not rust, so these stay serviceable through more seasons than plated steel. Keep the original hardware in a bag in case the guards move to another bike later, and use a torque wrench on the pinch bolts rather than guessing.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475789173046,"sku":"S-TIHANDGUARD-B","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/20220715_092911_edited-scaled.jpg?v=1787785436"},{"product_id":"warp9-e-moto-handguards","title":"Warp 9 E-Moto Handguards","description":"\u003cp\u003eWarp 9's own minimal handguard setup for lightweight e-moto bikes, built after the available options proved floppy and weak on plastic mounts. The bar mounts here are CNC machined aluminum, so they hold their position instead of flexing or twisting when a guard takes a hit.\u003c\/p\u003e\u003cp\u003eThe mounts drop below the brake and switch gear for clearance, and the bracket can be rotated to sit above or below the controls, so lever perches and buttons stay clear. Shields are injection molded composite with internal reinforcing strakes, giving enough rigidity to deflect branches while keeping some flex so the bars are not yanked out of your hands. Black or white shields, seven PVC decal kits and the mounting hardware are included.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Black","offer_id":54475789730102,"sku":"S-HGUARD-2","price":45.0,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":54475789762870,"sku":"S-HGUARD-0","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/20251022_120610_720.jpg?v=1787785446"},{"product_id":"warp9-ek-420sh-e-moto-chain","title":"Warp 9 EK 420SH E-Moto Chain","description":"\u003cp\u003eAn EK 420SH chain in gold, supplied at 120 links with a C clip master link in the box. It is a non O-ring chain, which means less drag in the driveline than a sealed chain and more frequent cleaning and lubrication in exchange.\u003c\/p\u003e\u003cp\u003ePlates are gold inner and outer, with black carbon rollers. Warp 9 lists the link count for each rear sprocket size: 104 links for a 42 tooth, 106 for the 48 tooth stock size, 108 for a 52, 110 for a 54, 112 for a 56 or 58, 114 for a 60 and 116 for a 64. Count the links you need before cutting, since a chain cut short cannot be lengthened.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475790057782,"sku":"420SH-120G","price":63.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/external-content.duckduckgo.jpg?v=1787785454"},{"product_id":"dirtybike-bearing-kit-10mm-intermediate-shaft","title":"DirtyBike Bearing Kit 10mm Intermediate Shaft","description":"\u003cp\u003eWorn out intermediate shaft (jackshaft) bearings can quickly turn into excessive play, rough operation, and a more involved repair. Replace loose, noisy, or gritty bearings before they fail with a DirtyBike off-road sealed bearing kit.\u003c\/p\u003e\u003cp\u003eThis complete kit includes four precision deep-groove, rubber-sealed “Black Stripe” bearings and two double-lip seals for a full intermediate shaft bearing refresh. DirtyBike’s exclusive Black Stripe bearings are a substantial upgrade over stock, using high-quality GCr15 bearing steel designed to handle demanding off-road loads, high-speed operation, and the abuse of hard riding.\u003c\/p\u003e\u003cp\u003eRubber seals help keep dirt, water, and debris out of the bearings, while the included double-lip seals add another layer of protection where it matters most.\u003c\/p\u003e\u003cp\u003eKeep your drivetrain running smooth and avoid being sidelined by worn intermediate shaft bearings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e4 DirtyBike Black Stripe precision deep-groove rubber-sealed bearings\u003c\/li\u003e\n\u003cli\u003e2 double-lip seals\u003c\/li\u003e\n\u003cli\u003eSurron Light Bee LBX\u003c\/li\u003e\n\u003cli\u003eE Ride Pro SS\u003c\/li\u003e\n\u003cli\u003e2025 and older E Ride Pro 2.0\u003c\/li\u003e\n\u003cli\u003eTalaria X3 \/ XXX\u003c\/li\u003e\n\u003cli\u003eE Ride Pro SS 3.0\u003c\/li\u003e\n\u003cli\u003eE Ride Pro SR\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFits the Surron Light Bee X, Talaria XXX, E-Ride Pro SS.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Default Title","offer_id":54486752919862,"sku":"LB-ISBK-ZY","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/Surron-LightBee-db-intermediate-bearings.jpg?v=1788105045"},{"product_id":"dirtybike-cnc-aluminum-foot-pegs","title":"DirtyBike CNC Aluminum Foot Pegs","description":"\u003cp\u003eCNC machined 7075 series aluminum foot pegs with an aggressive bite for standing and off-road riding. The stainless steel inserts are replaceable and removable, which is the detail that matters on a peg: teeth wear round after a season, and here you renew the inserts rather than the whole peg.\u003c\/p\u003e\u003cp\u003eThey work with the stock peg springs, so no extra hardware is needed. Available in black, blue, red, green and blaze orange, sold as a single item, shipping weight 0.69 lb. Verified against the Surron Light Bee X, Talaria Sting MX3, Talaria XXX and E-Ride Pro SS. Order two if you are doing both sides.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Black","offer_id":54486753182006,"sku":"TS-FP-CNCAL-B","price":89.0,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":54486753214774,"sku":"TS-FP-CNCAL-BL","price":89.0,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":54486753247542,"sku":"TS-FP-CNCAL-R","price":89.0,"currency_code":"USD","in_stock":true},{"title":"Green","offer_id":54486753280310,"sku":"TS-FP-CNCAL-G","price":89.0,"currency_code":"USD","in_stock":true},{"title":"Blaze Orange","offer_id":54486753313078,"sku":null,"price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/Talaria-Sting-db-CNC-aluminum-footpeg-blue.jpg?v=1788105057"}],"url":"https:\/\/motorhabit.com\/collections\/txxx\/fits-sgx160.oembed","provider":"MotorHabit","version":"1.0","type":"link"}