{"title":"Talaria Sting MX5","description":"\u003cp\u003e\u003cstrong\u003eWhat fits the MX5.\u003c\/strong\u003e Twenty parts checked against the Talaria Sting MX5. MX5-specific: brake pads, a rear brake disc, a chain guide, a sprocket and a battery cover. Drivetrain shared with other bikes: a chain, sprockets for Surron and Talaria Sting and a rear sprocket. Controls: a throttle, a brake lever and a handlebar height increase. Footpegs, a foot brake lever kit, a side stand sensor and a tail lamp round it out, along with a headlight, handlebar bag and number plate shared with Surron.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNewest Sting, fewest carry-overs.\u003c\/strong\u003e The MX5 is the newest Sting, and the one where MX3 and MX4 parts most often do not carry over. That is why this page is shorter than the MX3 and MX4 pages and why the MX5-only brake and drivetrain parts sit at the top. Check the fitment row before you buy anything that also names the older bikes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment.\u003c\/strong\u003e Every part carries an MX5 fitment tag and a fitment badge on its product card. A part that names MX3 MX4 MX5 was checked on all three; a part that names only MX5 was not assumed to fit the others.\u003c\/p\u003e","products":[{"product_id":"jfg-brake-pads-fit-talaria-mx5","title":"Brake Pads Fit Talaria MX5","description":"\u003cp\u003eBrake pads for the Talaria Sting MX5. These are a sintered replacement for the stock pads, aimed at riders who brake hard and often and want more consistent stopping power than an organic compound gives. They fit the MX5 calipers directly.\u003c\/p\u003e\u003cp\u003eThe pads use an all-copper-based metal sintering process, which gives high strength, high temperature resistance, and steady braking force. Wear life is longer than ordinary pads, so they suit long rides and repeated braking. They work in rain, mud, and temperature extremes. Bed them in with a series of moderate stops before riding hard, and confirm whether you need a front or rear set for your caliper.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"Default Title","offer_id":54427421868342,"sku":"A13152503","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/b283663596ad21205883b734f1ee2eac.jpg?v=1787145085"},{"product_id":"jfg-throttle-fit-mx3-mx4-mx5","title":"Throttle Fit Talaria MX3\/MX4\/MX5","description":"\u003cp\u003eThis JFG Racing throttle fits the Talaria Sting MX3, MX4 and MX5. It replaces the stock plastic throttle housing with a machined aluminum unit and keeps the original cable and connector, so it goes on as a plug-and-play swap with no cutting or rewiring.\u003c\/p\u003e\u003cp\u003eThe body is CNC machined from 6061 aluminum. The internal keyway is cut to a close clearance with the throttle shaft, which takes the slop out of the twist and gives a smoother, more linear response. It is made from the original factory dimensions, so the stock throttle cable and housing stay as they are. Simply remove the original plastic parts and fit the new throttle in their place.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"Default Title","offer_id":54427421933878,"sku":"A16142504","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/7668551aefb7b7fdae300b1454b0c6d9.jpg?v=1787145087"},{"product_id":"jfg-chain-guide-fit-talaria-mx5","title":"Chain Guide Fit Talaria MX5","description":"\u003cp\u003eA chain guide for the Talaria Sting MX5. It keeps the chain lined up with the rear sprocket over rough ground, so the chain is less likely to derail or saw into the swingarm. Fit it as a replacement for a damaged stock guide or as an upgrade to a stronger part.\u003c\/p\u003e\u003cp\u003eThe guide is made from 6061 aluminum and alloy steel. The package includes one racing steel chain guide; color is as shown in the product pictures. It mounts in the stock guide position on the MX5. Before ordering, confirm your bike is the MX5, since guides for other Talaria models are shaped differently. After fitting, spin the wheel and check the chain runs through the guide without rubbing at either end.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"Default Title","offer_id":54427423539510,"sku":"A141625017","price":37.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/27d9a56b288417273f8274e17e4e9ee2.jpg?v=1787145095"},{"product_id":"jfg-handlebar-bag-fit-surron-talaria-sting","title":"Handlebar Bag Fit Sur-Ron Talaria Sting","description":"\u003cp\u003eA nylon handlebar bag for carrying tools on the Surron Light Bee X, Talaria Sting MX3, MX4 and MX5, and the Segway X260 and X160. It straps to the bar with universal buckles, so it goes on and comes off without tools and will also fit most other e-dirt-bike handlebars.\u003c\/p\u003e\u003cp\u003eThe bag is nylon that resists wear and dirt and is waterproof and dustproof. It is light. Sized for on-board tools such as wrenches, a tire repair kit and an inflator, it keeps those items in one place instead of rattling around a pocket. Mount it centered on the crossbar or bar pad area, and check that the buckles do not interfere with cable routing or lever travel at full lock.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"Default Title","offer_id":54427423834422,"sku":"A22110061","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/handlebar-bag-fit-surron-talaria-sting-1.jpg?v=1787145105"},{"product_id":"jfg-head-light-fit-talaria-sur-ron","title":"Head Light Fit Talaria Sur-Ron","description":"\u003cp\u003eThis JFG Racing headlight fits the Surron Light Bee X and the Talaria Sting MX3, MX4 and MX5. It replaces or adds to the stock front light with a unit that throws a concentrated spot beam down the trail, which is useful for riders who go out after dark or start before sunrise.\u003c\/p\u003e\u003cp\u003eThe housing is built from aluminum alloy and iron, which takes heat away from the light source and holds up to vibration and impact. The beam is a focused spotlight pattern that lights up distant objects rather than a wide flood. Route the wiring away from the steering stops and secure it with ties so it does not rub when the bars turn lock to lock.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"yellow","offer_id":54475984535862,"sku":"A183100025","price":47.99,"currency_code":"USD","in_stock":true},{"title":"white","offer_id":54475984568630,"sku":"A183100026","price":47.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/White-Head-Light-Fit-TALARIA-Sur-Ron.jpg?v=1787793683"},{"product_id":"jfg-talaria-foot-brake-lever-kit","title":"Foot Brake Lever kit Fit Talaria MX3 MX4 MX5","description":"\u003cp\u003eFoot brake lever kit for the Talaria Sting MX3, MX4, and MX5. It adds a foot-operated rear brake with improved pedal support and horizontal reinforcement over earlier designs, giving a more stable feel when standing and braking on rough ground.\u003c\/p\u003e\u003cp\u003eThe pedal is made from high-strength steel that resists bending and twisting, and the rear master cylinder body is lightweight aluminum alloy that sheds heat. An internal piston seal rated for high temperature and pressure keeps the action smooth. After installation, bleed the rear circuit carefully and check pedal height so it sits where your boot naturally lands.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"Default Title","offer_id":54427423998262,"sku":"A13192515","price":109.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/foot-brake-lever-kit-fit-talaria-mx3-mx4-mx5.jpg?v=1787145109"},{"product_id":"jfg-sprocket-fit-talaria-mx5","title":"Sprocket Fit Talaria MX5 E-bike","description":"\u003cp\u003eA replacement sprocket for the Talaria Sting MX5. It matches the stock drivetrain and mounting points, so it swaps in for a worn or hooked original with no modification. Fit it when the teeth have started to sharpen or the chain is skipping under load.\u003c\/p\u003e\u003cp\u003eThe sprocket is made from high-strength iron and 6061 aluminum alloy. CNC machining gives clean tooth profiles and an accurate center bore, which means smoother power delivery and less noise. The surface is anodized to harden it against wear. Count the teeth on your existing sprocket before ordering and check it against the product photos; a change in tooth count will change your gearing and may need a different chain length.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"Default Title","offer_id":54427424031030,"sku":"A14132501","price":209.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/Sprocket-Fit-TALARIA-MX5-E-bike.jpg?v=1787145109"},{"product_id":"jfg-battery-cover-fit-talaria-mx5","title":"Battery Cover Fit Talaria MX5","description":"\u003cp\u003eA replacement battery cover for the Talaria Sting MX5. It fits the original battery compartment and replaces a cover that has cracked or been lost. Its job is to protect the battery from bumps and vibration on rough ground.\u003c\/p\u003e\u003cp\u003eThe cover is made from PP plastic combined with die-cast aluminum, giving impact resistance without much weight. It is flame retardant and holds its shape in high-temperature conditions. Installation is bolt-on using the existing mounts. Keep the stock fasteners to reuse. If your MX5 battery cover is only scuffed rather than broken, a decal may be the cheaper fix; this part is for a damaged cover.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"Default Title","offer_id":54427424063798,"sku":"A11272505","price":168.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/battery-cover-fit-talaria-mx5.jpg?v=1787145110"},{"product_id":"jfg-number-plate-fit-surron-talaria","title":"Number Plate Fit Sur-Ron Talaria Super73 Stark Varg","description":"\u003cp\u003eFront number plate for the Surron Light Bee X, Talaria Sting MX3, MX4, and MX5, and the Super73. It mounts to the front suspension and gives you a flat face for a race number or graphics, plus a wider shield in front of the bars than the small stock plates. JFG Racing describes it as a universal-style design rather than a model-specific molding.\u003c\/p\u003e\u003cp\u003eMade from flexible, impact-resistant PVC\/PP, so it bends on contact with branches and stones instead of cracking. The back of the plate has pre-reserved cable space so brake and control lines can route cleanly behind it without being pinched or bent. The coverage area is enlarged compared with a minimal plate, and the plate body is on the harder side for better protection. Route your cables through the channel before tightening the straps so nothing is trapped against the fork.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"red","offer_id":54475984601398,"sku":"A114520012","price":21.99,"currency_code":"USD","in_stock":true},{"title":"blue","offer_id":54475984634166,"sku":"A114520013","price":21.99,"currency_code":"USD","in_stock":true},{"title":"purple","offer_id":54475984666934,"sku":"A114520019","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/Number-Plate-Fit-Surron-Talaria-Super-73-Stark-Varg_06aa4a25-86e9-4d3f-87c0-72c9d40f2cab.jpg?v=1787793690"},{"product_id":"jfg-rear-brake-disc-fit-talaria-mx5","title":"Rear Brake Disc Fit Talaria MX5","description":"\u003cp\u003eRear brake disc for the Talaria Sting MX5. It replaces a worn or warped rear rotor and is made to fit the MX5 mounting pattern directly, so installation is a straight swap. Fresh rotor surfaces bring back consistent rear braking.\u003c\/p\u003e\u003cp\u003eThe disc is made from high-strength stainless iron that resists wear and heat, and it is laser cut for accurate dimensions and flat, stable mounting. The heat-dissipating design reduces thermal fade during long descents. Match it with a fresh set of pads, clean the surface before the first ride, and torque the rotor bolts evenly so it spins true.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"Default Title","offer_id":54427424260406,"sku":"A13132504","price":71.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/rear-brake-disc-fit-talaria-mx5.jpg?v=1787145117"},{"product_id":"jfg-foot-pegs-fit-honda-surron-talaria","title":"Foot Pegs Fit Honda Sur-Ron Talaria","description":"\u003cp\u003eA pair of foot pegs for the Surron Light Bee X and the Talaria Sting MX3, MX4 and MX5. They replace the stock pegs and give your boots a stable platform, which helps balance and control over rough ground and in tight turns. The vendor also lists them for several Honda CRF and XR models.\u003c\/p\u003e\u003cp\u003eConstruction is 6061 aluminum alloy with stainless steel for strength in the high-wear areas. The design is lightweight, so it does not add to the bike. They mount to the stock peg brackets. If your pegs already feel loose, check the pivot pins and springs while you have things apart, because a new peg on a worn bracket still moves.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"Black","offer_id":54475984011574,"sku":"A1114021127","price":60.99,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":54475984044342,"sku":"A1114021122","price":60.99,"currency_code":"USD","in_stock":true},{"title":"Purple","offer_id":54475984077110,"sku":"A1114021129","price":60.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/foot-pegs-fit-honda-surron-talaria.jpg?v=1787793704"},{"product_id":"jfg-foot-pegs-fit-talaria","title":"Foot Pegs Fit Talaria X3 MX3 MX4 MX5","description":"\u003cp\u003eA pair of CNC-machined foot pegs for the Talaria Sting MX3, MX4 and MX5. They replace the stock pegs and use all of the original hardware, so the swap is bolt-off, bolt-on. The vendor also lists the Talaria X3.\u003c\/p\u003e\u003cp\u003eThe pegs are 6061 aluminum alloy, light and wear-resistant. The teeth are sharp and replaceable, and the modular design means you can pull and replace worn teeth instead of the whole peg. One pair is included, as pictured. Keep the stock pins, springs and clips when you remove the old pegs, since those are what hold the new ones on, and check the teeth for tightness now and then.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"Red","offer_id":54475985453366,"sku":"A111425102","price":55.99,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":54475985486134,"sku":"A111425107","price":55.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/foot-pegs-fit-talaria-x3-mx3-mx4-mx5-black.jpg?v=1787793712"},{"product_id":"jfg-talaria-sting-foot-pegs","title":"Foot Pegs Fit Talaria Sting MX3 MX4 MX5","description":"\u003cp\u003eA pair of foot pegs for the Talaria Sting MX3, Talaria Sting MX4 and Talaria Sting MX5. They are a direct stock replacement, fitting with your existing hardware, and are stiffer than the factory pegs if you ride standing up a lot.\u003c\/p\u003e\u003cp\u003eThe pegs are made entirely of 6061 aluminum and are precision-cast, which gives good support under aggressive off-road riding and resists bending or breaking. No modifications are needed; the pegs mount with the factory hardware. One pair is included as pictured. Compare the tooth profile against your boot soles; a cast peg with a fixed platform holds differently from one with replaceable pins.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"Default Title","offer_id":54427424686390,"sku":"A11142511","price":71.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/foot-pegs-fit-talaria-sting-mx3-mx4-mx5.jpg?v=1787145126"},{"product_id":"jfg-talaria-side-stand-sensor","title":"Side Stand Sensor Fit Talaria Sting MX4 MX5","description":"\u003cp\u003eSide stand sensor for the Talaria Sting MX4 and MX5. It replaces the stock sensor that tells the ECU whether the kickstand is up or down, which is what stops the throttle from engaging while the stand is deployed. A sensor that fails or breaks leaves you with a bike that either will not go or will go when it should not.\u003c\/p\u003e\u003cp\u003eBuilt in two materials: a PP engineering plastic body over a stainless steel load-bearing frame, which JFG Racing says raises the weight capacity compared with the OEM part and resists corrosion. It is shaped to match the OEM chassis mounting and uses the stock connectors, so it plugs in where the original sat. After fitting, cycle the stand up and down a few times with the bike on and confirm the cutoff works before riding.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"Default Title","offer_id":54427424817462,"sku":"A11222506","price":25.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/side-stand-sensor-fit-talaria-sting-mx4-mx5-jfg-racing.jpg?v=1787145129"},{"product_id":"jfg-tail-lamp-for-talaria-sting","title":"Tail Lamp for Talaria Sting MX3\/MX4 MX5","description":"\u003cp\u003eTail lamp for the Talaria Sting MX3, MX4, and MX5. It replaces a broken or dim stock rear lamp and keeps you visible from behind on night rides. Fitment is specific to the three Sting models listed, so it drops in where the factory lamp sits.\u003c\/p\u003e\u003cp\u003eThe housing is made from PP plastic for durability under rough riding. JFG Racing lists installation as straightforward with no modifications needed. The package includes one tail lamp as shown in the pictures; installation instructions are not included, so note how the stock lamp is wired and mounted before you remove it. Test the lamp with the bike powered on before buttoning everything up.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"Default Title","offer_id":54427430486326,"sku":"A18132501","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/tail-lamp-for-talaria-sting-mx3-mx4-jfg-racing.jpg?v=1787145164"},{"product_id":"jfg-chain-for-talaria-sting","title":"Chain iron for Talaria Sting","description":"\u003cp\u003eA replacement drive chain for the Talaria Sting MX3, Talaria Sting MX4 and Talaria Sting MX5. It replaces the original chain once it has stretched or started to skip on the sprockets. Pitch and length are made for the Sting drivetrain.\u003c\/p\u003e\u003cp\u003eThe chain is iron, for toughness and tensile strength, and is built to resist stretching, breaking and jumping. It provides stable power transmission and a high load capacity. Fitting is a straight swap. Before installing, check your rear sprocket for hooked teeth and confirm the link count against your current chain; a sprocket tooth change will alter the length you need.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"106","offer_id":54475988435254,"sku":"A141420121-B","price":67.99,"currency_code":"USD","in_stock":true},{"title":"112","offer_id":54475988468022,"sku":"A141420122-B","price":78.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/chain-iron-for-talaria-sting-jfg-racing-1.jpg?v=1787793828"},{"product_id":"jfg-sprocket-for-sur-ron-and-talaria-sting","title":"Sprocket for Sur-Ron And Talaria Sting","description":"\u003cp\u003eA sprocket for the Surron Light Bee X, Segway X260, Segway X160, Talaria Sting MX3, Talaria Sting MX4 and Talaria Sting MX5. It replaces a worn stock sprocket and cuts rotating weight at the rear wheel. Use it when teeth are hooked or you are changing gearing.\u003c\/p\u003e\u003cp\u003eThe sprocket is CNC machined from 7075 aerospace aluminum alloy, weighing about half as much as an ordinary sprocket while keeping strength. The anodized surface resists wear under strong torsion. Installation is quick. Count the teeth on your current sprocket and check the product photos before ordering, since a different count changes gearing and chain length. Fit a new chain if the old one is stretched.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"Black \/ 58T","offer_id":54475994956086,"sku":"A141320015","price":66.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ 62T","offer_id":54475994988854,"sku":"A1413200110","price":70.99,"currency_code":"USD","in_stock":false},{"title":"Orange \/ 58T","offer_id":54475995021622,"sku":"A141320011","price":66.99,"currency_code":"USD","in_stock":true},{"title":"Orange \/ 62T","offer_id":54475995054390,"sku":"A141320016","price":70.99,"currency_code":"USD","in_stock":false},{"title":"Red \/ 58T","offer_id":54475995087158,"sku":"A141320012","price":66.99,"currency_code":"USD","in_stock":true},{"title":"Red \/ 62T","offer_id":54475995119926,"sku":"A141320017","price":70.99,"currency_code":"USD","in_stock":false},{"title":"Gold \/ 58T","offer_id":54475995152694,"sku":"A141320013","price":66.99,"currency_code":"USD","in_stock":false},{"title":"Gold \/ 62T","offer_id":54475995185462,"sku":"A141320018","price":70.99,"currency_code":"USD","in_stock":false},{"title":"Silver \/ 58T","offer_id":54475995218230,"sku":"A141320014","price":66.99,"currency_code":"USD","in_stock":false},{"title":"Silver \/ 62T","offer_id":54475995250998,"sku":"A141320019","price":70.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/sprocket-for-sur-ron-and-talaria-sting-jfg-racing-1_e406cc5a-417c-4de0-b054-650aaef8b7c6.jpg?v=1787794031"},{"product_id":"jfg-rear-sprocket-for-sur-ron-light-bee-1","title":"Rear Sprocket for Sur-Ron Light Bee","description":"\u003cp\u003eA rear sprocket for the Surron Light Bee X, Segway X260, Segway X160, Talaria Sting MX3, Talaria Sting MX4 and Talaria Sting MX5. It replaces a worn stock rear sprocket and suits a rider who wants a lighter rear gear with a cleaner look.\u003c\/p\u003e\u003cp\u003eThe sprocket is machined from 7075 aviation-grade aluminum alloy, which is rust resistant, wear resistant and holds up over long use. It is light and compact, so installation is straightforward. Check the tooth count on your current sprocket against the product photos before ordering; a different count changes the chain length you need. Replace a stretched chain at the same time.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"Default Title","offer_id":54427442643254,"sku":"A141320041","price":70.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/rear-sprocket-for-sur-ron-light-bee-jfg-racing-1.jpg?v=1787145336"},{"product_id":"jfg-handle-bar-height-increase-for-sur-ron","title":"Handle Bar Height Increase for Sur-Ron","description":"\u003cp\u003eThis JFG Racing handlebar riser raises the bar height on the Surron Light Bee X, Talaria Sting MX3, MX4 and MX5, and the Segway X160. It mounts between the stock clamp and the bars to bring the grips up and back, which opens up your riding posture for standing sections and gives a more upright position on longer rides.\u003c\/p\u003e\u003cp\u003eThe riser can be stacked with other risers or lifting pads when you want more height than a single unit gives. Stacked setups may need longer screws than the ones in the stock clamp, so check bolt engagement before the first ride. The riser has a wider contact area than a plain spacer, which keeps the bar clamp from rocking once torqued down. Reuse your stock bars and clamp hardware where the length allows.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"15mm","offer_id":54476003606838,"sku":"A151120031","price":20.99,"currency_code":"USD","in_stock":true},{"title":"25mm","offer_id":54476003639606,"sku":"A151120032","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/handle-bar-height-increase-for-sur-ron-jfg-racing-1.jpg?v=1787794198"},{"product_id":"jfg-clutch-brake-lever-for-sur-ron","title":"Brake Lever for Sur-Ron","description":"\u003cp\u003eA single replacement brake lever for the Surron Light Bee X and the Talaria Sting MX3, MX4 and MX5. It replaces a bent or broken stock lever blade on the bar and keeps the bike rideable without a full master cylinder swap.\u003c\/p\u003e\u003cp\u003eThe lever is CNC-machined so the pivot fits cleanly and the lines are smooth. The surface is painted for corrosion and rust resistance and comes in a bright color. Per the vendor, the lever is designed to cut off battery current when pulled in an emergency. Keep your original pivot bolt, and test that the brake cutoff engages and the motor stops before your first ride.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"Default Title","offer_id":54427443986742,"sku":"S14152029","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/clutch-leverandbrake-lever-for-sur-ron-jfg-racing-1.jpg?v=1787145373"},{"product_id":"guts-talaria-sting-mx5-pro-seat","title":"GUTS Talaria Sting MX5 Pro Seat","description":"\u003cp\u003eThis page covers every GUTS Racing seat cover for the Talaria Sting MX5 Pro, model years 2024-26. Choose the RF1 Fast Arrow pattern for mid-range grip, the ribbed interactive cover in the gripper material GUTS supplies to factory race teams, or the plain non-ribbed cover.\u003c\/p\u003e\u003cp\u003eEach cover is cut and sewn to order at GUTS Racing's California factory, with a standard or black ballistic nylon knee panel. Build time runs 10-14 business days. Nothing here is held in stock ahead of an order.\u003c\/p\u003e","brand":"GUTS Racing","offers":[{"title":"RF1 cover \/ Standard","offer_id":54460752625974,"sku":"81-3-TALARIA-RF1-COVER","price":99.99,"currency_code":"USD","in_stock":true},{"title":"RF1 cover \/ Ballistic nylon, black","offer_id":54460752658742,"sku":"81-3-TALARIA-RF1-COVER-BN","price":116.98,"currency_code":"USD","in_stock":true},{"title":"Ribbed cover \/ Standard","offer_id":54460752691510,"sku":"81-8-TALARIA-RIBBED-COVER","price":79.99,"currency_code":"USD","in_stock":true},{"title":"Non-ribbed cover \/ Standard","offer_id":54460752724278,"sku":"81-6-TALARIA-NONRIBBED-COVER","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/81-3-TALARIA-RF1-COVER-2.jpg?v=1787183016"},{"product_id":"warp9-formula-brake-levers","title":"Warp 9 Formula Brake Levers","description":"\u003cp\u003eForged aluminum folding brake levers cut for the Formula brake system, sold individually for the left or the right side. Forging produces a stronger lever than the cast levers usually offered, which counts on a part that hits the ground in every tip-over.\u003c\/p\u003e\u003cp\u003eThe ball-detent hinge lets the lever fold away in a crash rather than bending or breaking, and a paddle built into the hinge still trips the brake switches, so regen braking and the brake light keep working. The blade carries octagon pattern recesses for grip in the wet and a curved face instead of a square edge. Reach is set by an indexed knob. The left lever includes a parking brake. Seven finishes are offered.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Left Side \/ Black","offer_id":54475648041270,"sku":"S-FMLEFTLVR-2","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Left Side \/ Blue","offer_id":54475648074038,"sku":"S-FMLEFTLVR-4","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Left Side \/ Silver","offer_id":54475648106806,"sku":"S-FMLEFTLVR-1","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Left Side \/ Red","offer_id":54475648139574,"sku":"S-FMLEFTLVR-3","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Left Side \/ Gold","offer_id":54475648172342,"sku":"S-FMLEFTLVR-9","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Left Side \/ Magnesium Anodized","offer_id":54475648205110,"sku":"S-FMLEFTLVR-6","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Left Side \/ Purple","offer_id":54475648237878,"sku":"S-FMLEFTLVR-V","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Right Side \/ Black","offer_id":54475648270646,"sku":"S-FMRIGHTLVR-2","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Right Side \/ Blue","offer_id":54475648303414,"sku":"S-FMRIGHTLVR-4","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Right Side \/ Silver","offer_id":54475648336182,"sku":"S-FMRIGHTLVR-1","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Right Side \/ Red","offer_id":54475648368950,"sku":"S-FMRIGHTLVR-3","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Right Side \/ Gold","offer_id":54475648401718,"sku":"S-FMRIGHTLVR-9","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Right Side \/ Magnesium Anodized","offer_id":54475648434486,"sku":"S-FMRIGHTLVR-6","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Right Side \/ Purple","offer_id":54475648467254,"sku":"S-FMRIGHTLVR-V","price":46.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/BlackLeft.png?v=1787784956"},{"product_id":"warp9-talaria-mx5-rear-axle-kit","title":"Warp 9 Talaria MX5 Rear Axle Kit","description":"\u003cp\u003eA rear axle and axle block kit for the Talaria Sting MX5, built around two specific faults in the original setup: the stock axle is too short to fully engage the axle block on the nut side, and the block bore is oversized, which lets the axle move inside it.\u003c\/p\u003e\u003cp\u003eThe Warp 9 axle is longer than stock and pairs with billet blocks bored to match the axle diameter. The axle is keyed to the block, so it cannot rotate and the wheel can come out with a single 17mm socket. The blocks carry machined locating steps that sit against the ridges cast into the original swingarm, which improves alignment and cuts movement under load. Recheck chain tension after the first ride.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475651285302,"sku":"T-MX5RAXLEKIT-2","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/ChatGPTImageJun10_2026_11_05_32AM.png?v=1787784970"},{"product_id":"warp9-switchback-tire-16","title":"Warp 9 SwitchBack Tire 16\"","description":"\u003cp\u003eThe SwitchBack in 16 x 3.50, aimed at riders who split their time between pavement, backroads and trails and do not want to change tires between them. The tread is a narrow knobby pattern, which gives bite in dirt, gravel and medium off-road ground while staying predictable on the street.\u003c\/p\u003e\u003cp\u003eThe carcass is 4-ply, which is what gives it stability and puncture resistance when the riding gets rough. Unlike directional tires, every SwitchBack size is designed to be fitted front or rear, so one tire covers both ends of a build. Warp 9 does not intend it for extended highway use and lists it for mixed-terrain and recreational riding.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475651318070,"sku":"T-SB16350","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/ChatGPTImageMay22_2026_03_21_46PM.png?v=1787784971"},{"product_id":"warp9-switchback-tire-19","title":"Warp 9 SwitchBack Tire 19\"","description":"\u003cp\u003eThe SwitchBack in 19 x 2.75, the front size that pairs with the 16 inch rear on a typical e-moto wheel set. It is built for riders who cover pavement, backroads and trail in the same day, with a narrow knobby tread that bites in dirt and gravel without turning vague on tarmac.\u003c\/p\u003e\u003cp\u003eThe carcass is 4-ply for stability and puncture resistance under aggressive riding. All SwitchBack sizes are non-directional and designed for front or rear fitment, so the same tire can be run at either end. Warp 9 does not intend it for extended highway use and lists it for mixed-terrain and recreational riding rather than road mileage.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475651350838,"sku":"T-SB19275","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/ChatGPTImageMay22_2026_02_44_47PM.png?v=1787784974"},{"product_id":"warp9-emoto-folding-brake-levers-check-list-below-for-fitment","title":"Warp 9 E-Moto Folding Brake Levers","description":"\u003cp\u003eForged aluminum brake levers with a folding hinge, sold individually for the left or the right side. Forging gives a denser, stronger lever than the cast levers commonly sold, which matters on a part that meets the ground in every tip-over.\u003c\/p\u003e\u003cp\u003eThe ball-detent folding hinge lets the lever swing away in a crash instead of bending or snapping. An integrated paddle inside the hinge still trips the brake switches, so regen braking and the brake light keep working. The blade has octagon pattern recesses for grip in wet or muddy conditions and a curved face rather than a square edge. Reach is set with an indexed knob. The left lever includes a built-in parking brake. Seven anodized finishes are offered.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Left Side \/ Silver Anodized","offer_id":54475687919926,"sku":"T-MX5BRAKE-L-1","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Left Side \/ Black Anodized","offer_id":54475687952694,"sku":"T-MX5BRAKE-L-2","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Left Side \/ Red Anodized","offer_id":54475687985462,"sku":"T-MX5BRAKE-L-3","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Left Side \/ Blue Anodized","offer_id":54475688018230,"sku":"T-MX5BRAKE-L-4","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Left Side \/ Magnesium Anodized","offer_id":54475688050998,"sku":"T-MX5BRAKE-L-6","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Left Side \/ Gold Anodized","offer_id":54475688083766,"sku":"T-MX5BRAKE-L-9","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Left Side \/ Purple Anodized","offer_id":54475688116534,"sku":"T-MX5BRAKE-L-V","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Right Side \/ Silver Anodized","offer_id":54475688149302,"sku":"T-MX5BRAKE-R-1","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Right Side \/ Black Anodized","offer_id":54475688182070,"sku":"T-MX5BRAKE-R-2","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Right Side \/ Red Anodized","offer_id":54475688214838,"sku":"T-MX5BRAKE-R-3","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Right Side \/ Blue Anodized","offer_id":54475688247606,"sku":"T-MX5BRAKE-R-4","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Right Side \/ Magnesium Anodized","offer_id":54475688280374,"sku":"T-MX5BRAKE-R-6","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Right Side \/ Gold Anodized","offer_id":54475688313142,"sku":"T-MX5BRAKE-R-9","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Right Side \/ Purple Anodized","offer_id":54475688345910,"sku":"T-MX5BRAKE-R-V","price":46.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/23e15f28-a56a-4d3a-97e2-d3dcd3eb70ff_f529a0f4-7132-44ce-a71c-bfd74dfac200.png?v=1787785005"},{"product_id":"warp9-talaria-mx5-front-sprocket","title":"Warp 9 Talaria MX5 Front Sprocket","description":"\u003cp\u003eThe front sprocket for the Talaria Sting MX5, machined from hardened tool steel and black oxide coated so it outlasts the sprocket it replaces. A larger flange reduces movement on the driveshaft compared with a thinner sprocket, and a new jackshaft seal is included and already installed in the sprocket.\u003c\/p\u003e\u003cp\u003eThirteen tooth is the stock size. Fourteen tooth adds top speed and extends range by dropping motor rpm at a given road speed, at the cost of some low-end torque. One tooth at the front changes overall gearing more than one tooth at the rear, so it is a bigger step than it looks. Check the chain has adjustment left before changing size.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"13 Tooth(Stock)","offer_id":54475689984310,"sku":"T-MX5CS-13","price":22.0,"currency_code":"USD","in_stock":true},{"title":"14 Tooth","offer_id":54475690017078,"sku":"T-MX5CS-14","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/T-MX5CS-talariaMX5countershaftsprocket_2.jpg?v=1787785010"},{"product_id":"warp9-v2-high-output-headlight-with-w9-mounting","title":"Warp 9 V2 High-Output Headlight with W9 Mounting","description":"\u003cp\u003eThe V2 high-output headlight, built around a Diode Dynamics Series 2 Pro unit made in the USA and rated at 1988 lumens. It ships with a dual beam lens covering both spot and flood, and other lens styles are available separately if the beam needs to suit different riding.\u003c\/p\u003e\u003cp\u003eA plug and play wire harness and an on\/off button are included, along with a blue backlight that shows when the main light is off. The switch mounts to the stock brake master cylinder for a clean cockpit, with a back half bracket included so it works with any brake brand. The custom mounting bracket suits the Warp 9 bar mount and triple clamps, and one of those is required to fit it.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475692671286,"sku":"S-HLIGHT-B","price":210.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/IMG_2758.jpg?v=1787785012"},{"product_id":"warp9-titanium-rear-sprocket-bolts-talaria-mx5-burnt-blue","title":"Warp 9 Titanium Rear Sprocket Bolts – Talaria MX5 (Burnt Blue)","description":"\u003cp\u003eRear sprocket bolts for the Talaria Sting MX5 in grade 5 titanium, replacing the stock bolts one for one. Sprocket bolts sit directly behind the rear tire and take everything it throws forward, which is why the plated steel originals corrode and then round out under an Allen key.\u003c\/p\u003e\u003cp\u003eThese use a Torx head, which grips the whole drive rather than six corners and resists cam-out. Titanium brings high tensile strength with strong corrosion resistance while taking unsprung weight off the wheel. The finish is burnt blue anodized. One fitment note: Warp 9 states these do not work with KKE hubs, which have no recess for the bolt head to sink into.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475692802358,"sku":"T-TI-MX5SPROCKETBOLT-B","price":33.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/T-TI-MX5SPROCKETBOLT-B.jpg?v=1787785014"},{"product_id":"warp9-talaria-mx5-hall-sensor-wire-guard","title":"Warp 9 Talaria MX5 Hall Sensor Wire Guard","description":"\u003cp\u003eA machined aluminum guard that covers the motor hall sensor wire on the Talaria Sting MX5. That wire is exposed and easy to pinch, sever or crush, and because it runs into the motor, a cut wire can mean replacing the motor rather than the wire.\u003c\/p\u003e\u003cp\u003eIt is cut specifically for the MX5 motor housing and bolts on directly with no modification. New stainless steel bolts are included so nothing has to be reused. Seven anodized finishes are offered. Warp 9 lists it as fitting the MX5 only, not the MX3 or MX4. Optional titanium hardware is available separately, at one of each length rather than a set.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Magnesium Anodized","offer_id":54475693687094,"sku":"T-SWIREGUARD-6","price":38.0,"currency_code":"USD","in_stock":true},{"title":"Red Anodized","offer_id":54475693719862,"sku":"T-SWIREGUARD-3","price":38.0,"currency_code":"USD","in_stock":true},{"title":"Black Anodized","offer_id":54475693752630,"sku":"T-SWIREGUARD-2","price":38.0,"currency_code":"USD","in_stock":true},{"title":"Gold Anodized","offer_id":54475693785398,"sku":"T-SWIREGUARD-9","price":38.0,"currency_code":"USD","in_stock":true},{"title":"Purple Anodized","offer_id":54475693818166,"sku":"T-SWIREGUARD-V","price":38.0,"currency_code":"USD","in_stock":true},{"title":"Blue Anodized","offer_id":54475693850934,"sku":"T-SWIREGUARD-4","price":38.0,"currency_code":"USD","in_stock":true},{"title":"Silver Anodized","offer_id":54475693883702,"sku":"T-SWIREGUARD-1","price":38.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/T-SWIREGUARD-2_17c6dfa0-99bd-42fd-82fb-57b7205a0e58.jpg?v=1787785019"},{"product_id":"warp9-steer-lock-replacment-base-nut-fender-mount","title":"Warp 9 Steer Lock Replacement Base Nut, Fender Mount","description":"\u003cp\u003eThe base nut for the Warp 9 Steer Lock kit in the fender mount style. It is the version to use where the fork's lower triple clamp has no fender mounting tabs of its own, so the fender has to hang off the steer lock instead.\u003c\/p\u003e\u003cp\u003eFitting a fender to it also needs the Warp 9 fender adapter, which is a separate part, so order both together if the bike is going from no fender to a fender. This is a service part and works with the Warp 9 Steer Lock kit only. Check which base nut is on the bike before ordering, since the two styles are not interchangeable.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475694178614,"sku":"S-STEERNUT-F-2","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/S-STEERNUT-F-2.jpg?v=1787785020"},{"product_id":"warp9-steer-lock-base-nut-no-fender","title":"Warp 9 Steer Lock Base Nut, No Fender","description":"\u003cp\u003eThe base nut for the Warp 9 Steer Lock kit in the version without a fender mount. It suits bikes whose fork lower clamps already carry the factory fender, so the steer lock does not have to provide a mounting point of its own.\u003c\/p\u003e\u003cp\u003eThis is a service part. It works with the Warp 9 Steer Lock kit and is not a stem lock on its own, so it is bought as a replacement or to change a kit from one style to the other. Check which base nut the bike currently runs before ordering, since the fender mount version and this one are not interchangeable once a fender adapter is in the picture.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475694244150,"sku":"S-STEERNUT-NF-2","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/S-STEERNUT-NF-2.jpg?v=1787785020"},{"product_id":"warp9-stem-lock-spacer-kit","title":"Warp 9 Stem Lock Spacer Kit","description":"\u003cp\u003eThe full spacer set for a Warp 9 Stem Lock, so stack height on the steering tube can be set without hunting for odd sizes one at a time. Five spacers are included, in 3mm, 5mm, 10mm, 15mm and 20mm.\u003c\/p\u003e\u003cp\u003eOnce the original bar mount comes off a steering tube, there is almost always a gap to take up, and getting the stack right is what keeps the bearing preload correct. Having the whole range on the bench means the height can be set once and left alone. It is a service part and works with Warp 9 Stem Locks. Keep the spares with the bike for the next front end change.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475694309686,"sku":"S-STEERSPACERS-2","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/S-STEERSPACERS-2.jpg?v=1787785021"},{"product_id":"warp9-steerlock-replacement-cap","title":"Warp 9 Steer Lock Replacement Cap","description":"\u003cp\u003eThe anodized top cap for a Warp 9 Steer Lock. It sits at the very top of the steering stem, which makes it one of the few parts of the front end that is visible from the saddle, and it is the cheapest way to change how that area looks.\u003c\/p\u003e\u003cp\u003eSeven finishes are offered: silver, black, red, blue, magnesium, gold and purple. It is a service part and works with the Warp 9 Steer Lock kit only, so it is bought as a replacement for a scuffed cap or to recolor a cockpit rather than as a stand-alone upgrade. Keep the original cap if the bike may go back to its earlier look later.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Silver Anodized","offer_id":54475694375222,"sku":"S-STEERCAP-1","price":10.0,"currency_code":"USD","in_stock":true},{"title":"Black Anodized","offer_id":54475694407990,"sku":"S-STEERCAP-2","price":10.0,"currency_code":"USD","in_stock":true},{"title":"Red Anodized","offer_id":54475694440758,"sku":"S-STEERCAP-3","price":10.0,"currency_code":"USD","in_stock":true},{"title":"Blue Anodized","offer_id":54475694473526,"sku":"S-STEERCAP-4","price":10.0,"currency_code":"USD","in_stock":true},{"title":"Magnesium Anodized","offer_id":54475694506294,"sku":"S-STEERCAP-6","price":10.0,"currency_code":"USD","in_stock":true},{"title":"Gold Anodized","offer_id":54475694539062,"sku":"S-STEERCAP-9","price":10.0,"currency_code":"USD","in_stock":true},{"title":"Purple Anodized","offer_id":54475694571830,"sku":"S-STEERCAP-V","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/S-STEERCAP-1.jpg?v=1787785022"},{"product_id":"warp9-mx5-rotors","title":"Warp 9 MX5 Rotors","description":"\u003cp\u003eBrake rotors for the Talaria Sting MX5, usable on either the front or the rear hub and listed for both stock and Warp 9 hubs. Three combinations are offered: 220mm fixed, 220mm floating and 250mm floating.\u003c\/p\u003e\u003cp\u003eA fixed rotor is one piece and simpler to live with. A floating rotor carries its braking surface on rivets so it can expand as it heats, which holds lever feel steadier when the brake is worked hard. The 250mm option includes the adapter spacers needed to push the caliper out to the larger disc, so no separate bracket has to be sourced. Bed new pads and rotor in together over a series of gentle stops.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Fixed \/ 220mm","offer_id":54475703681334,"sku":"T-MX5-220","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Floating \/ 220mm","offer_id":54475703714102,"sku":"T-MX5F-220","price":69.0,"currency_code":"USD","in_stock":true},{"title":"Floating \/ 250mm","offer_id":54475703746870,"sku":"T-MX5F-250","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/T-MX5-220.jpg?v=1787785032"},{"product_id":"warp9-e-moto-tapped-handlebar","title":"Warp 9 E-Moto Tapped Handlebar","description":"\u003cp\u003eWarp 9's tapped e-moto handlebar, with the bar ends threaded from the factory so bar-end sliders can be fitted without drilling. That is worth having on a bike that spends time on the ground, since the bar end is what takes the first hit.\u003c\/p\u003e\u003cp\u003eClamp diameter is 31.8mm. Two rises are offered, 80mm or three inches and 40mm or one and a half inches, so the cockpit height can be set to the rider rather than the bike. Grip protectors and the bar-end bolts are included. Eight finishes are available, including white powder coat alongside black, silver, red, blue, magnesium, gold and purple anodizing.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"White Powder Coat \/ 80mm \/ 3.00\"","offer_id":54475705516342,"sku":"SH-31.8-80-0","price":105.0,"currency_code":"USD","in_stock":true},{"title":"White Powder Coat \/ 40mm \/ 1.50\"","offer_id":54475705549110,"sku":"SH-31.8-40-0","price":105.0,"currency_code":"USD","in_stock":true},{"title":"Black Anodized \/ 80mm \/ 3.00\"","offer_id":54475705581878,"sku":"SH-31.8-80-2","price":97.0,"currency_code":"USD","in_stock":true},{"title":"Black Anodized \/ 40mm \/ 1.50\"","offer_id":54475705614646,"sku":"SH-31.8-40-2","price":97.0,"currency_code":"USD","in_stock":true},{"title":"Silver Anodized \/ 80mm \/ 3.00\"","offer_id":54475705647414,"sku":"SH-31.8-80-1","price":97.0,"currency_code":"USD","in_stock":true},{"title":"Silver Anodized \/ 40mm \/ 1.50\"","offer_id":54475705680182,"sku":"SH-31.8-40-1","price":97.0,"currency_code":"USD","in_stock":true},{"title":"Red Anodized \/ 80mm \/ 3.00\"","offer_id":54475705712950,"sku":"SH-31.8-80-3","price":97.0,"currency_code":"USD","in_stock":true},{"title":"Red Anodized \/ 40mm \/ 1.50\"","offer_id":54475705745718,"sku":"SH-31.8-40-3","price":97.0,"currency_code":"USD","in_stock":true},{"title":"Blue Anodized \/ 80mm \/ 3.00\"","offer_id":54475705778486,"sku":"SH-31.8-80-4","price":97.0,"currency_code":"USD","in_stock":true},{"title":"Blue Anodized \/ 40mm \/ 1.50\"","offer_id":54475705811254,"sku":"SH-31.8-40-4","price":97.0,"currency_code":"USD","in_stock":true},{"title":"Magnesium Anodized \/ 80mm \/ 3.00\"","offer_id":54475705844022,"sku":"SH-31.8-80-6","price":97.0,"currency_code":"USD","in_stock":true},{"title":"Magnesium Anodized \/ 40mm \/ 1.50\"","offer_id":54475705876790,"sku":"SH-31.8-40-6","price":97.0,"currency_code":"USD","in_stock":true},{"title":"Gold Anodized \/ 80mm \/ 3.00\"","offer_id":54475705909558,"sku":"SH-31.8-80-9","price":97.0,"currency_code":"USD","in_stock":true},{"title":"Gold Anodized \/ 40mm \/ 1.50\"","offer_id":54475705942326,"sku":"SH-31.8-40-9","price":97.0,"currency_code":"USD","in_stock":true},{"title":"Purple Anodized \/ 80mm \/ 3.00\"","offer_id":54475705975094,"sku":"SH-31.8-80-V","price":97.0,"currency_code":"USD","in_stock":true},{"title":"Purple Anodized \/ 40mm \/ 1.50\"","offer_id":54475706007862,"sku":"SH-31.8-40-V","price":97.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/SH-31.8-80-0.jpg?v=1787785036"},{"product_id":"warp9-talaria-sigma-elite-foot-pegs","title":"Warp 9 Talaria \/ Sigma Elite Foot Pegs","description":"\u003cp\u003eElite foot pegs cut for the Talaria Sting, forged from 7075-T6 aluminum and then CNC machined. The platform measures 3 5\/8 by 2 3\/8 inches, or 89 by 58mm, which is a large step up from a narrow stock peg and makes standing through rough ground far less tiring.\u003c\/p\u003e\u003cp\u003eThey sit 1\/4 inch back from the original peg location and use the stock springs and pivot pins, so nothing else has to be sourced to fit them. The teeth are stainless steel. Eight finishes are offered, including a white powder coat. Titanium replacement teeth and Elite peg sliders are sold separately. Try the position before committing, since a quarter inch back changes the standing stance.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"White Powder Coat","offer_id":54475709612342,"sku":"EP-46-0","price":150.0,"currency_code":"USD","in_stock":true},{"title":"Silver Anodized","offer_id":54475709645110,"sku":"EP-46-1","price":142.0,"currency_code":"USD","in_stock":true},{"title":"Black Anodized","offer_id":54475709677878,"sku":"EP-46-2","price":142.0,"currency_code":"USD","in_stock":true},{"title":"Red Anodized","offer_id":54475709710646,"sku":"EP-46-3","price":142.0,"currency_code":"USD","in_stock":true},{"title":"Blue Anodized","offer_id":54475709743414,"sku":"EP-46-4","price":142.0,"currency_code":"USD","in_stock":true},{"title":"Magnesium Anodized","offer_id":54475709776182,"sku":"EP-46-6","price":142.0,"currency_code":"USD","in_stock":true},{"title":"Gold Anodized","offer_id":54475709808950,"sku":"EP-46-9","price":142.0,"currency_code":"USD","in_stock":true},{"title":"Purple Anodized","offer_id":54475709841718,"sku":"EP-46-V","price":142.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/EP-47-3_23e3a840-4ffe-4ab4-bda2-9a38e729a537.jpg?v=1787785051"},{"product_id":"warp9-talaria-kickstand","title":"Warp 9 Talaria Kickstand","description":"\u003cp\u003eAn adjustable kickstand for Talaria bikes, sized to follow the wheel swaps riders make rather than one fixed setup. It adjusts from 11 inches to 13.5 inches in half-inch steps, so the mid setting suits a 19 and 16 inch wheel combination, the full setting a 21 and 18, and the shortest setting handles 16 inch wheels at both ends.\u003c\/p\u003e\u003cp\u003eThe pivot head is machined steel, the body is tubular steel and the foot is aluminum. The spring pin is shorter than the original to give clearance for wider tires. A spring puller is included so the stock kickstand spring can be reused, and there is a magnet in the head so a kickstand lockout still works if one is fitted.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475711054134,"sku":"T-KICKADJ-2","price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/Surron-Kickstand.jpg?v=1787785056"},{"product_id":"warp9-talaria-sting-12-9-cryo-steel-rear-linkage-bolt-kit","title":"Warp 9 Talaria Sting 12.9 Cryo Steel Rear Linkage Bolt Kit","description":"\u003cp\u003eA complete rear linkage bolt kit for the Talaria Sting, machined from 12.9 grade steel and cryo treated. Warp 9 rates the treated bolts at three to four times the strength of the originals and roughly twice that of titanium, and backs them with a lifetime warranty against bending or breaking.\u003c\/p\u003e\u003cp\u003eThe bolts are fully shanked, so no threaded section bears against the frame or swingarm and cuts into it, which is what tired original bolts do over a season. The kit includes a linkage to swingarm bolt and a linkage to shock bolt, each with a Fuji lock nut, and the nuts are black oxide coated for corrosion resistance. Grease the linkage while it is apart.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475711414582,"sku":"T-ST-STINGLINKAGE-2","price":119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/T-ST-STINGLINKAGE-2.jpg?v=1787785061"},{"product_id":"warp9-bar-straps","title":"Warp 9 Bar Straps","description":"\u003cp\u003eA set of reusable rubber straps for tidying cables, wiring and brake hoses on the handlebars. They do the job zip ties do, except they can be adjusted and opened again, which matters on a part of the bike that gets taken apart often.\u003c\/p\u003e\u003cp\u003eEach kit contains four straps: two standard and two adjustable length, so the same kit covers a thin throttle cable and a thicker brake hose bundle. They replace stock part numbers 01609630, 44011076200, 60011093045, 60011093075, 60011093060 and STD-RB-0007. Route the brake hose with enough slack for full steering lock before pulling any of them tight.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475712201014,"sku":"MH-BARSTRAPS-2","price":11.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/MH-BARSTRAPS-21.jpg?v=1787785068"},{"product_id":"warp9-shock-cover","title":"Warp 9 Shock Cover","description":"\u003cp\u003eA neoprene cover that wraps around the rear shock and keeps mud, rocks and trail debris off the shock shaft. A scored shaft tears seals and turns into a leaking shock, so this is a cheap part that protects an expensive one.\u003c\/p\u003e\u003cp\u003eThe neoprene is 4mm thick for abrasion and impact resistance, and it is cut for e-moto shocks with a 10.5 inch bolt-to-bolt length. The split-back Velcro closure means the shock does not have to come out of the bike to fit it: wrap it around, close the Velcro and it is done. Measure your shock bolt to bolt before ordering, and pull the cover off to rinse behind it after muddy rides.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475712233782,"sku":"S-SHOCKCOVER-2","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/S-SHOCKCOVER-21.jpg?v=1787785068"},{"product_id":"warp9-talaria-sting-mx5-sprocket","title":"Warp 9 Talaria Sting MX5 Sprocket","description":"\u003cp\u003eA rear sprocket for the Talaria Sting MX5, machined from 7075-T6 aluminum and hard-coat anodized black. It is cut for the original 428 chain and uses the stock sprocket bolts, so nothing else is needed to fit it.\u003c\/p\u003e\u003cp\u003eThree tooth counts are offered: 50, 54 and 58. More teeth adds climbing torque and takes top speed away, fewer does the reverse, so pick against the ground you actually ride rather than the number that sounds fastest. Aluminum keeps weight off the outside of the wheel where it costs most, at the price of wearing quicker than steel. Check the front sprocket while the rear is off.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"50 TOOTH","offer_id":54475712299318,"sku":"T-SPROMX5-50","price":54.0,"currency_code":"USD","in_stock":true},{"title":"54 TOOTH","offer_id":54475712332086,"sku":"T-SPROMX5-54","price":60.0,"currency_code":"USD","in_stock":true},{"title":"58 TOOTH","offer_id":54475712364854,"sku":"T-SPROMX5-58","price":64.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/T-SPROCMX5-50.jpg?v=1787785069"},{"product_id":"warp9-talaria-sting-linkage","title":"Warp 9 Talaria Sting linkage","description":"\u003cp\u003eA forged 7075-T6 rear linkage for the Talaria Sting, offered at stock height or with a 0.75 inch rise. The rise version is what brings the head angle back toward the original geometry after the wheel sizes have been changed, which is the usual reason a bike starts steering lazily after a wheel swap.\u003c\/p\u003e\u003cp\u003eIt runs two hardened chrome steel bushings on quad needle cage bearings. Two low profile grease ports let fresh grease be put through the bearings rather than waiting for them to wear out, and two rubber dust caps keep the ports clean between services. Eight finishes are offered. Grease it at the same interval as the rest of the linkage.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Black \/ 0\"","offer_id":54475717345590,"sku":"T-LINK.0-2","price":105.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ .75\"","offer_id":54475717378358,"sku":"T-LINK.75-2","price":105.0,"currency_code":"USD","in_stock":true},{"title":"Red \/ .75\"","offer_id":54475717411126,"sku":"T-LINK.75-3","price":105.0,"currency_code":"USD","in_stock":true},{"title":"Red \/ 0\"","offer_id":54475717443894,"sku":"T-LINK.0-3","price":105.0,"currency_code":"USD","in_stock":true},{"title":"Magnesium \/ 0\"","offer_id":54475717476662,"sku":"T-LINK.0-6","price":105.0,"currency_code":"USD","in_stock":true},{"title":"Magnesium \/ .75\"","offer_id":54475717509430,"sku":"T-LINK.75-6","price":105.0,"currency_code":"USD","in_stock":true},{"title":"Purple \/ 0\"","offer_id":54475717542198,"sku":"T-LINK.0-V","price":105.0,"currency_code":"USD","in_stock":true},{"title":"Purple \/ .75\"","offer_id":54475717574966,"sku":"T-LINK.75-V","price":105.0,"currency_code":"USD","in_stock":true},{"title":"White \/ .75\"","offer_id":54475717607734,"sku":"T-LINK.75-0","price":113.0,"currency_code":"USD","in_stock":true},{"title":"White \/ 0\"","offer_id":54475717640502,"sku":"T-LINK.0-0","price":113.0,"currency_code":"USD","in_stock":true},{"title":"Blue \/ 0\"","offer_id":54475717673270,"sku":"T-LINK.0-4","price":105.0,"currency_code":"USD","in_stock":true},{"title":"Blue \/ .75\"","offer_id":54475717706038,"sku":"T-LINK.75-4","price":105.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ 0\"","offer_id":54475717738806,"sku":"T-LINK.0-1","price":105.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ .75\"","offer_id":54475717771574,"sku":"T-LINK.75-1","price":105.0,"currency_code":"USD","in_stock":true},{"title":"Gold \/ .75\"","offer_id":54475717804342,"sku":"T-LINK.75-9","price":105.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/T-LINK0-2-black-0.jpg?v=1787785080"},{"product_id":"warp9-standard-stem-lock-for-forks-that-already-have-a-fender-mounting-solution","title":"Warp 9 Standard Stem Lock - For forks that already have a fender mounting solution.","description":"\u003cp\u003eA stem lock for forks whose lower clamps already provide a fender mount. Because the fender mounting is handled by the fork, this version is smaller and simpler at the bottom than the fender-mount stem lock, and it leaves more clearance around the fender itself.\u003c\/p\u003e\u003cp\u003eHead bearings that keep coming loose are usually a symptom of the original star nut walking up the steering tube. This kit replaces that with a threaded rod running the full length of the steering tube, clamping the lower triple clamp to the upper one so the bearing preload holds. Four black steering tube spacers are included, in 20mm, 15mm, 5mm and 3mm. Use a 3\/8 drive on the bottom nut and a Torx on the top bolt.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Black","offer_id":54475718328630,"sku":"S-NFSTEERLOCK-2","price":39.0,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":54475718361398,"sku":"S-NFSTEERLOCK-3","price":39.0,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":54475718394166,"sku":"S-NFSTEERLOCK-4","price":39.0,"currency_code":"USD","in_stock":true},{"title":"Gold","offer_id":54475718426934,"sku":"S-NFSTEERLOCK-9","price":39.0,"currency_code":"USD","in_stock":true},{"title":"Magnesium","offer_id":54475718459702,"sku":"S-NFSTEERLOCK-6","price":39.0,"currency_code":"USD","in_stock":true},{"title":"Purple","offer_id":54475718492470,"sku":"S-NFSTEERLOCK-V","price":39.0,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":54475718525238,"sku":"S-NFSTEERLOCK-1","price":39.0,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":54475718558006,"sku":"S-NFSTEERLOCK-0","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/S-NFSTEERLOCK-2-720x540.jpg?v=1787785080"},{"product_id":"warp9-titanium-elite-foot-peg-screws","title":"Warp 9 Titanium Elite Foot Peg Screws","description":"\u003cp\u003eOptional titanium traction screws for Warp 9 Elite foot pegs. Titanium holds a sharp edge longer than the standard stainless screws, which matters because the teeth are what stop a wet boot sliding off the peg. Thread size is M5 x 0.8 x 10mm and 26 pieces are supplied, which includes two spares.\u003c\/p\u003e\u003cp\u003eTwo styles are offered. The set screw style gives the most grip, roughly 20 percent more than the Torx style, and comes with an Allen wrench and blue thread locker. The Torx style comes with a double-ended wrench for the Torx section and its 6mm base. They fit Warp 9 Elite pegs only, the ones whose part numbers start with EP.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Black Anodized \/ Torx","offer_id":54475718689078,"sku":"EP-TORXSCREW-2","price":59.0,"currency_code":"USD","in_stock":true},{"title":"Black Anodized \/ Set Screw","offer_id":54475718721846,"sku":"EP-PEGSCREW-2","price":59.0,"currency_code":"USD","in_stock":true},{"title":"Blue Powder Coat \/ Torx","offer_id":54475718754614,"sku":"EP-TORXSCREW-B","price":59.0,"currency_code":"USD","in_stock":true},{"title":"Blue Powder Coat \/ Set Screw","offer_id":54475718787382,"sku":"EP-PEGSCREW-B","price":59.0,"currency_code":"USD","in_stock":true},{"title":"Green Anodized \/ Torx","offer_id":54475718820150,"sku":"EP-TORXSCREW-7","price":59.0,"currency_code":"USD","in_stock":true},{"title":"Green Anodized \/ Set Screw","offer_id":54475718852918,"sku":"EP-PEGSCREW-7","price":59.0,"currency_code":"USD","in_stock":true},{"title":"Gold Anodized \/ Torx","offer_id":54475718885686,"sku":"EP-TORXSCREW-9","price":59.0,"currency_code":"USD","in_stock":true},{"title":"Gold Anodized \/ Set Screw","offer_id":54475718918454,"sku":"EP-PEGSCREW-9","price":59.0,"currency_code":"USD","in_stock":true},{"title":"Purple Anodized \/ Torx","offer_id":54475718951222,"sku":"EP-TORXSCREW-V","price":59.0,"currency_code":"USD","in_stock":true},{"title":"Purple Anodized \/ Set Screw","offer_id":54475718983990,"sku":"EP-PEGSCREW-V","price":59.0,"currency_code":"USD","in_stock":true},{"title":"Silver Anodized \/ Torx","offer_id":54475719016758,"sku":"EP-TORXSCREW-1","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/EP-TORXSCREW-Bf_f16b654e-507d-47fd-a40d-9a789a82430a.jpg?v=1787785085"},{"product_id":"warp9-e-moto-big-light-kit","title":"Warp 9 E-Moto Big Light Kit","description":"\u003cp\u003eThe Big Light headlight kit for e-moto bikes, built around 50W of LEDs producing 5000 lumens of 6000K white light. The array is six spot and three flood, plus six side-shooting LEDs, so the beam covers both distance and the edges of the trail rather than a single narrow spot.\u003c\/p\u003e\u003cp\u003eThe light and the wire harness connectors carry an IP67 rating for rain, mud and snow. A CNC machined aluminum bracket gives up to 25 degrees of aim adjustment, set by a custom knob that works in gloves without tools. A waterproof switch mounts to the stock brake perch or separately on the back half clamp. It mounts to the Warp 9 direct mount stem only, so a stem is required.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Black Anodized","offer_id":54475740709174,"sku":"S-BIGLIGHT-2","price":164.0,"currency_code":"USD","in_stock":true},{"title":"Red Anodized","offer_id":54475740741942,"sku":"S-BIGLIGHT-3","price":164.0,"currency_code":"USD","in_stock":true},{"title":"Blue Anodized","offer_id":54475740774710,"sku":"S-BIGLIGHT-4","price":164.0,"currency_code":"USD","in_stock":true},{"title":"Magnesium Anodized","offer_id":54475740807478,"sku":"S-BIGLIGHT-6","price":164.0,"currency_code":"USD","in_stock":true},{"title":"Gold Anodized","offer_id":54475740840246,"sku":"S-BIGLIGHT-9","price":164.0,"currency_code":"USD","in_stock":true},{"title":"Purple Anodized","offer_id":54475740873014,"sku":"S-BIGLIGHT-V","price":164.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/S-BIGLIGHT-2_18896a0a-09df-4f20-b189-2ae78dbab8de.jpg?v=1787785091"},{"product_id":"warp9-headlight-lens-variants","title":"Warp 9 Headlight Lens Variants","description":"\u003cp\u003eA replacement lens for the Warp 9 headlight, offered in four beam patterns so the light can be re-aimed at the kind of riding being done rather than replaced. Choose driving, flood, fog or spot.\u003c\/p\u003e\u003cp\u003eA spot lens throws a narrow beam a long way, which suits open, fast ground. A flood lens spreads light wide and close, which is what helps in tight woods at low speed. Fog sits low and wide to cut glare in bad conditions, and driving is the general purpose middle ground. Many riders keep two lenses and swap by season. This is the lens only, so the headlight and its harness are bought separately.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Driving","offer_id":54475741135158,"sku":"S-HLIGHTLENS-DRIVING","price":24.95,"currency_code":"USD","in_stock":true},{"title":"Flood","offer_id":54475741167926,"sku":"S-HLIGHTLENS-FLOOD","price":24.95,"currency_code":"USD","in_stock":true},{"title":"Fog","offer_id":54475741200694,"sku":"S-HLIGHTLENS-FOG","price":24.95,"currency_code":"USD","in_stock":true},{"title":"Spot","offer_id":54475741233462,"sku":"S-HLIGHTLENS-SPOT","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/dd6624_c2_lens_white_spot_top_angle.jpg?v=1787785094"},{"product_id":"warp9-talaria-sting-gearcase-vent","title":"Warp 9 Talaria Sting Gearcase Vent","description":"\u003cp\u003eA replacement vent for the Talaria Sting gearcase that keeps water, dirt and mud out of the gear oil while still letting the case breathe. A gearcase has to vent as it heats and cools, and the original path is the easy way for water to get in.\u003c\/p\u003e\u003cp\u003eThe molded snorkel top tube is the first line of defense, raising the vent opening away from the spray. Below it, a CNC machined anodized check valve keeps oil inside the case if the bike falls over, while still allowing air to move as the case expands and contracts with heat. Six colors are offered and Warp 9 rates fitting at about five minutes.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Black","offer_id":54475742642486,"sku":"T-CASEVENT-2","price":28.0,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":54475742675254,"sku":"T-CASEVENT-3","price":28.0,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":54475742708022,"sku":"T-CASEVENT-4","price":28.0,"currency_code":"USD","in_stock":true},{"title":"Magnesium","offer_id":54475742740790,"sku":"T-CASEVENT-6","price":28.0,"currency_code":"USD","in_stock":true},{"title":"Gold","offer_id":54475742773558,"sku":"T-CASEVENT-9","price":28.0,"currency_code":"USD","in_stock":true},{"title":"Purple","offer_id":54475742806326,"sku":"T-CASEVENT-V","price":28.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/gearventMX3_edited_4715dc4d-649e-44f1-9c1f-7d0fcc0871a4.jpg?v=1787785100"},{"product_id":"warp9-talaria-extension-wire","title":"Warp 9 Talaria Extension Wire","description":"\u003cp\u003eA three inch throttle extension cable. Warp 9 lists it against a specific symptom: error code 37 appearing after taller bars or taller bar mounts have been fitted, which is caused by the throttle cable pulling its own plug apart as the bars rise.\u003c\/p\u003e\u003cp\u003eIf the bike threw code 37 immediately after a cockpit change, this is usually the fix, and it is a far cheaper first thing to try than a throttle or a controller. Warp 9 lists it as fitting the Talaria XXX and the Talaria R-MX4. Route the extra length so it is not pinched at full steering lock, and cable-tie it clear of the fork before riding.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475748278582,"sku":"T-XXX-EXT-WIRE","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/T-XXX-EXT-WIRE-1-scaled.jpg?v=1787785110"},{"product_id":"warp9-helmet-hook","title":"Warp 9 Helmet Hook","description":"\u003cp\u003eA machined aluminum hook that clamps to the handlebar and gives a helmet somewhere to hang while the bike is parked. It is a small part that saves an expensive one, since a helmet balanced on a seat or a bar end usually ends up on the ground.\u003c\/p\u003e\u003cp\u003eIt is machined from 7075-T6 aluminum and clamps to 7\/8 inch handlebars. Two stainless screws are included. Warp 9 recommends fitting it on the kickstand side of the bars, so the weight of the helmet pulls toward the side the bike is already leaning on rather than against it. Check lever and control clearance before tightening it down.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475748344118,"sku":"S-HELMETHOOK-2","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/S-HELMENTHOOK-2-un-mounted_ddcac58c-243c-4aa3-958d-54effff2b38e.jpg?v=1787785111"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/collections\/mh-plat-tmx5.jpg?v=1787772455","url":"https:\/\/motorhabit.com\/collections\/tmx5\/fits-txxx.oembed","provider":"MotorHabit","version":"1.0","type":"link"}