{"title":"Rawrr Mantis","description":"\u003cp\u003e\u003cstrong\u003eWhat is here.\u003c\/strong\u003e A small, checked catalog for the Rawrr Mantis: footpegs, a rear wheel axle, a front axle, a brake and clutch lever set, a brake disc, two drive chains and a rear axle nut. Most of it is listed for the 72V Mantis, with the footpegs and one chain also covering the 60V bike. It is a shorter list than the Surron or Talaria pages, and it will grow only as more parts are confirmed on the bike.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow riders choose.\u003c\/strong\u003e Start with the wear items: chain, brake disc and levers are the parts that get replaced first on a Mantis that is ridden hard. Axles and the axle nut are the next thing to have on the shelf, because a bent axle ends the day. The two chains differ in which Mantis versions they cover, so read the title and the fitment row before adding one to the cart.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment.\u003c\/strong\u003e Every part in this collection carries a fitment tag for the Rawrr Mantis, and the product card shows a fitment badge so the match is visible before you open the page. If a part is listed for the 72V only, that is what it was checked against. Unsure about your bike year or battery voltage? Ask before ordering.\u003c\/p\u003e","products":[{"product_id":"jfg-footpeg-fitfir-rawrr-mnatis","title":"Footpeg Fit RAWRR Mnatis 60V\/72V","description":"\u003cp\u003eMachined 6061 aluminum foot peg brackets for the Rawrr Mantis, in both 60V and 72V versions. They replace the weak cast OEM brackets and put a solid mount under your foot pegs, which is the point: eliminating foot peg failures.\u003c\/p\u003e\u003cp\u003eThe brackets are 6061 aluminum with a black anodized finish. They use the factory mounting hardware, so you do not need new bolts, and the install is a direct bolt-on. The package contents are as pictured; installation instructions are not included. Torque the stock bolts back down evenly and recheck them after the first ride, since pegs see a lot of load when you stand up.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"Black","offer_id":54475984142646,"sku":"A111431017","price":62.99,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":54475984175414,"sku":"A111431016","price":62.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/9e6810e7be0c7e1c9b6298822a999dc4.jpg?v=1787793657"},{"product_id":"jfg-wheel-axle-fit-rawrr-72v-mantis","title":"Rear Wheel Axle Fit Rawrr 72V Mantis","description":"\u003cp\u003eThis rear wheel axle is made for the Rawrr Mantis (72V). It connects the rear wheel to the frame and keeps the wheel supported and turning true. It is a straightforward replacement for a bent or worn original.\u003c\/p\u003e\u003cp\u003eThe axle is iron, precision machined and heat-treated for wear and corrosion resistance. Color is as pictured and the package includes the rear axle as shown; installation instructions are not included. It fits with no modification. Reuse your stock axle nuts and spacers, torque the nut to spec, and check chain alignment after the wheel is back in.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"Default Title","offer_id":54427423703350,"sku":"A20233102","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/rear-wheel-axle-fit-rawrr-72v-mantis.jpg?v=1787145099"},{"product_id":"jfg-brake-and-cluth-lever-fit-rawrr-72v-mantis","title":"Brake And Cluth Lever Fit Rawrr 72V Mantis","description":"\u003cp\u003eBrake and clutch levers for the Rawrr Mantis 72V. They replace the stock levers with a solid aluminum pair that gives a firmer, smoother feel at the bar. JFG Racing designed them specifically for the 72V Mantis.\u003c\/p\u003e\u003cp\u003eThe levers are CNC machined from 6061 aluminum, which keeps them light without giving up strength or corrosion resistance. The anodized surface holds its color and resists scuffing. Movement is smooth, which helps control and comfort on long rides. Before ordering, check that your Mantis has the 72V spec, and transfer the stock pivot bolts and bushings if the new levers do not include them.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"Default Title","offer_id":54427423736118,"sku":"A13113101","price":37.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/brake-and-cluth-lever-fit-rawrr-72v-mantis.jpg?v=1787145100"},{"product_id":"jfg-brake-disc-fit-rawrr-72v-mantis","title":"Brake Disc Fit Rawrr Mantis 72V","description":"\u003cp\u003eBrake disc for the Rawrr Mantis 72V. On this bike the front and rear wheels share a universal disc, so this one rotor replaces a worn or warped disc at either end. Fresh rotors restore a consistent lever feel and shorter stopping distances.\u003c\/p\u003e\u003cp\u003eThe disc is made from stainless iron, which resists high temperatures and corrosion through wet and muddy conditions. Installation and replacement are straightforward because the same disc fits both wheels. Pair it with pads that are not glazed, clean it before the first ride, and bed the pads in with moderate stops. Confirm your bike is the 72V Mantis before ordering.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"Default Title","offer_id":54427423867190,"sku":"A13133101","price":36.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/brake-disc-fit-rawrr-mantis-72v.jpg?v=1787145106"},{"product_id":"jfg-front-axle-fit-rawrr-72v-mantis","title":"Front Axle Fit Rawrr Mantis 72V","description":"\u003cp\u003eThis front axle is made for the Rawrr Mantis (72V). It replaces the stock front wheel axle and is the part to order if yours is bent, worn, or missing.\u003c\/p\u003e\u003cp\u003eThe axle is aluminum, precision-machined for a stable fit and corrosion resistance while staying light. It is a simple bolt-on installation at the standard mounting points; installation instructions are not included. Reuse your stock axle nuts, torque the axle and pinch bolts to spec, and spin the front wheel to confirm it runs true before riding.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"Default Title","offer_id":54427423932726,"sku":"A20233103","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/front-axle-fit-rawrr-mantis-72v.jpg?v=1787145107"},{"product_id":"jfg-chain-fit-60v-72v-mantis-rawrr","title":"Chain Fit 60V\/72V Mantis RAWRR","description":"\u003cp\u003eA sealed drive chain for the Rawrr Mantis in both 60V and 72V versions. It replaces a stretched or dry stock chain and is built for off-road recreational riding where the chain sees grit, impact and shock loading. Confirm your Mantis version before ordering.\u003c\/p\u003e\u003cp\u003eThe chain is alloy steel, 40MN and 30CR, with solid rollers and solid bushings for strength. Reinforced rollers take high impact. An X-ring seal holds lubricant in the pins so the chain stays lubricated longer than a plain chain. The plates are joined with quad-stake riveting for shock absorption. Measure your current chain length before ordering and plan to check sprocket wear at the same time, since a new chain on hooked sprockets wears fast.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"Default Title","offer_id":54427425079606,"sku":"A14143101","price":53.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/chain-fit-60v-72v-mantis-rawrr.jpg?v=1787145138"},{"product_id":"jfg-chain-for-rawrr-72v-mantis-mantis-x","title":"Chain for RAWRR 72V Mantis Mantis X","description":"\u003cp\u003eA replacement drive chain for the Rawrr Mantis 72V and Mantis X. It replaces the original chain when it has stretched, started skipping on the sprockets or developed tight links. It is made to the Mantis drivetrain so pitch and length suit the stock sprockets.\u003c\/p\u003e\u003cp\u003eThe chain is made from iron for toughness and tensile strength. It gives stable transmission, a high load capacity and resists stretching, breaking and jumping in use. Installation is a direct replacement. Confirm which Mantis you have before ordering, compare the link count with your current chain, and check both sprockets for wear before fitting a new chain to old gears.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"106","offer_id":54475988500790,"sku":"A141420121-E","price":67.99,"currency_code":"USD","in_stock":true},{"title":"112","offer_id":54475988533558,"sku":"A141420122-E","price":78.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/chain-for-rawrr-72v-mantis-mantis-x-jfg-racing-1.jpg?v=1787793832"},{"product_id":"jfg-rear-axle-nut-for-for-electric-dirt-bikes","title":"Rear Axle Nut for for Electric Dirt Bikes","description":"\u003cp\u003eThis rear axle nut fits the Surron Light Bee X, Talaria Sting MX3, MX4, Sting R and XXX, E-Ride Pro SS, and Rawrr Mantis. It replaces the stock rear axle nut and seals the axle end against dust and debris, which keeps the axle and the parts behind it cleaner.\u003c\/p\u003e\u003cp\u003eThe nut is aluminum with an anodized coating for corrosion and wear resistance, so it keeps its finish over time. Thread size is M12 x 1.25 pitch; check your axle thread before ordering. It threads on in place of the stock nut. Torque to spec and do not overtighten an aluminum nut; re-check after the first ride.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"Black","offer_id":54476000428342,"sku":"A202220017","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Orange","offer_id":54476000461110,"sku":"A202220011","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":54476000493878,"sku":"A202220012","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":54476000526646,"sku":"A202220013","price":25.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/rear-axle-nut-for-for-electric-dirt-bikes-black.jpg?v=1787794117"},{"product_id":"guts-rawrr-mantis-seat","title":"GUTS Rawrr Mantis Seat","description":"\u003cp\u003eThis page covers every GUTS Racing seat option for the Rawrr Mantis Electric All-Terrain, model years 2023-25. Choose the RF1 Fast Arrow cover, the ribbed interactive cover in the gripper material GUTS supplies to factory race teams, or the plain non-ribbed cover, on its own or as a flat-front foam kit.\u003c\/p\u003e\u003cp\u003eCovers and kits are cut and sewn to order at GUTS Racing's California factory, with a standard or black ballistic nylon knee panel. Build time runs 10-14 business days for covers, 15-20 for flat-front kits.\u003c\/p\u003e","brand":"GUTS Racing","offers":[{"title":"RF1 cover \/ Standard","offer_id":54460749578550,"sku":"29-3-Rawrr-RF1-Cover","price":99.99,"currency_code":"USD","in_stock":true},{"title":"RF1 cover \/ Ballistic nylon, black","offer_id":54460749611318,"sku":"29-3-Rawrr-RF1-Cover-BN","price":116.98,"currency_code":"USD","in_stock":true},{"title":"Ribbed cover \/ Standard","offer_id":54460749644086,"sku":"29-8-Rawrr-Ribbed-Cover","price":79.99,"currency_code":"USD","in_stock":true},{"title":"Non-ribbed cover \/ Standard","offer_id":54460749676854,"sku":"29-6-Rawrr-NonRibbed-Cover","price":69.99,"currency_code":"USD","in_stock":true},{"title":"RF1 flat-front kit \/ Standard","offer_id":54460749709622,"sku":"30-3-Rawrr-RF1-CVR-FOAM-29-2","price":159.99,"currency_code":"USD","in_stock":true},{"title":"RF1 flat-front kit \/ Ballistic nylon, black","offer_id":54460749742390,"sku":"30-3-Rawrr-RF1-CVR-FOAM-29-2-BN","price":176.98,"currency_code":"USD","in_stock":true},{"title":"Ribbed flat-front kit \/ Standard","offer_id":54460749775158,"sku":"30-8-Rawrr-Rib-CVR-FOAM-29-2","price":139.99,"currency_code":"USD","in_stock":true},{"title":"Ribbed flat-front kit \/ Ballistic nylon, black","offer_id":54460749807926,"sku":"30-8-Rawrr-Rib-CVR-FOAM-29-2-BN","price":156.98,"currency_code":"USD","in_stock":true},{"title":"Non-ribbed flat-front kit \/ Standard","offer_id":54460749840694,"sku":"30-6-Rawrr-NoRib-CVR-Foam-29-2","price":129.99,"currency_code":"USD","in_stock":true},{"title":"Non-ribbed flat-front kit \/ Ballistic nylon, black","offer_id":54460749873462,"sku":"30-6-Rawrr-NoRib-CVR-Foam-29-2-BN","price":146.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/29-3-Rawrr-RF1-Cover-2.jpg?v=1787183055"},{"product_id":"warp9-formula-brake-levers","title":"Warp 9 Formula Brake Levers","description":"\u003cp\u003eForged aluminum folding brake levers cut for the Formula brake system, sold individually for the left or the right side. Forging produces a stronger lever than the cast levers usually offered, which counts on a part that hits the ground in every tip-over.\u003c\/p\u003e\u003cp\u003eThe ball-detent hinge lets the lever fold away in a crash rather than bending or breaking, and a paddle built into the hinge still trips the brake switches, so regen braking and the brake light keep working. The blade carries octagon pattern recesses for grip in the wet and a curved face instead of a square edge. Reach is set by an indexed knob. The left lever includes a parking brake. Seven finishes are offered.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Left Side \/ Black","offer_id":54475648041270,"sku":"S-FMLEFTLVR-2","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Left Side \/ Blue","offer_id":54475648074038,"sku":"S-FMLEFTLVR-4","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Left Side \/ Silver","offer_id":54475648106806,"sku":"S-FMLEFTLVR-1","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Left Side \/ Red","offer_id":54475648139574,"sku":"S-FMLEFTLVR-3","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Left Side \/ Gold","offer_id":54475648172342,"sku":"S-FMLEFTLVR-9","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Left Side \/ Magnesium Anodized","offer_id":54475648205110,"sku":"S-FMLEFTLVR-6","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Left Side \/ Purple","offer_id":54475648237878,"sku":"S-FMLEFTLVR-V","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Right Side \/ Black","offer_id":54475648270646,"sku":"S-FMRIGHTLVR-2","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Right Side \/ Blue","offer_id":54475648303414,"sku":"S-FMRIGHTLVR-4","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Right Side \/ Silver","offer_id":54475648336182,"sku":"S-FMRIGHTLVR-1","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Right Side \/ Red","offer_id":54475648368950,"sku":"S-FMRIGHTLVR-3","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Right Side \/ Gold","offer_id":54475648401718,"sku":"S-FMRIGHTLVR-9","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Right Side \/ Magnesium Anodized","offer_id":54475648434486,"sku":"S-FMRIGHTLVR-6","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Right Side \/ Purple","offer_id":54475648467254,"sku":"S-FMRIGHTLVR-V","price":46.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/BlackLeft.png?v=1787784956"},{"product_id":"warp9-switchback-tire-16","title":"Warp 9 SwitchBack Tire 16\"","description":"\u003cp\u003eThe SwitchBack in 16 x 3.50, aimed at riders who split their time between pavement, backroads and trails and do not want to change tires between them. The tread is a narrow knobby pattern, which gives bite in dirt, gravel and medium off-road ground while staying predictable on the street.\u003c\/p\u003e\u003cp\u003eThe carcass is 4-ply, which is what gives it stability and puncture resistance when the riding gets rough. Unlike directional tires, every SwitchBack size is designed to be fitted front or rear, so one tire covers both ends of a build. Warp 9 does not intend it for extended highway use and lists it for mixed-terrain and recreational riding.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475651318070,"sku":"T-SB16350","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/ChatGPTImageMay22_2026_03_21_46PM.png?v=1787784971"},{"product_id":"warp9-switchback-tire-19","title":"Warp 9 SwitchBack Tire 19\"","description":"\u003cp\u003eThe SwitchBack in 19 x 2.75, the front size that pairs with the 16 inch rear on a typical e-moto wheel set. It is built for riders who cover pavement, backroads and trail in the same day, with a narrow knobby tread that bites in dirt and gravel without turning vague on tarmac.\u003c\/p\u003e\u003cp\u003eThe carcass is 4-ply for stability and puncture resistance under aggressive riding. All SwitchBack sizes are non-directional and designed for front or rear fitment, so the same tire can be run at either end. Warp 9 does not intend it for extended highway use and lists it for mixed-terrain and recreational riding rather than road mileage.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475651350838,"sku":"T-SB19275","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/ChatGPTImageMay22_2026_02_44_47PM.png?v=1787784974"},{"product_id":"warp9-fastace-suspension-bundle-will-not-work-with-lewis-caliper","title":"Warp 9 FastAce Suspension Bundle","description":"\u003cp\u003eThe FastAce Gravitee AHX12RVP fork revalved by Warp 9 and bundled with their drop crown triple clamps. The fork is set up with custom valving, a 60 lb spring rate and Motul 5wt synthetic oil, aimed at aggressive riders in the 175 to 220 lb range.\u003c\/p\u003e\u003cp\u003eThe 12RVP adds topside preload and rebound adjusters, air bleeders on both fork caps, NAK double-lip seals and wipers, laser etching for ride height reference, 37mm lower stanchions and 18-step high and low speed compression damping. Brake mounts use the 75mm mountain bike bolt spacing, and brackets for 203mm and 220mm rotors are included. Clamps come in seven finishes. It is not compatible with Ultra Bee brake kits or with the Lewis caliper.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Silver Anodized","offer_id":54475651645750,"sku":null,"price":989.0,"currency_code":"USD","in_stock":true},{"title":"Black Anodized","offer_id":54475651678518,"sku":null,"price":989.0,"currency_code":"USD","in_stock":true},{"title":"Red Anodized","offer_id":54475651711286,"sku":null,"price":989.0,"currency_code":"USD","in_stock":true},{"title":"Blue Anodized","offer_id":54475651744054,"sku":null,"price":989.0,"currency_code":"USD","in_stock":true},{"title":"Magnesium Anodized","offer_id":54475651776822,"sku":null,"price":989.0,"currency_code":"USD","in_stock":true},{"title":"Gold Anodized","offer_id":54475651809590,"sku":null,"price":989.0,"currency_code":"USD","in_stock":true},{"title":"Purple Anodized","offer_id":54475651842358,"sku":null,"price":989.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/Black_Fork_24MP.jpg?v=1787784977"},{"product_id":"warp9-e-moto-tapped-handlebar","title":"Warp 9 E-Moto Tapped Handlebar","description":"\u003cp\u003eWarp 9's tapped e-moto handlebar, with the bar ends threaded from the factory so bar-end sliders can be fitted without drilling. That is worth having on a bike that spends time on the ground, since the bar end is what takes the first hit.\u003c\/p\u003e\u003cp\u003eClamp diameter is 31.8mm. Two rises are offered, 80mm or three inches and 40mm or one and a half inches, so the cockpit height can be set to the rider rather than the bike. Grip protectors and the bar-end bolts are included. Eight finishes are available, including white powder coat alongside black, silver, red, blue, magnesium, gold and purple anodizing.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"White Powder Coat \/ 80mm \/ 3.00\"","offer_id":54475705516342,"sku":"SH-31.8-80-0","price":105.0,"currency_code":"USD","in_stock":true},{"title":"White Powder Coat \/ 40mm \/ 1.50\"","offer_id":54475705549110,"sku":"SH-31.8-40-0","price":105.0,"currency_code":"USD","in_stock":true},{"title":"Black Anodized \/ 80mm \/ 3.00\"","offer_id":54475705581878,"sku":"SH-31.8-80-2","price":97.0,"currency_code":"USD","in_stock":true},{"title":"Black Anodized \/ 40mm \/ 1.50\"","offer_id":54475705614646,"sku":"SH-31.8-40-2","price":97.0,"currency_code":"USD","in_stock":true},{"title":"Silver Anodized \/ 80mm \/ 3.00\"","offer_id":54475705647414,"sku":"SH-31.8-80-1","price":97.0,"currency_code":"USD","in_stock":true},{"title":"Silver Anodized \/ 40mm \/ 1.50\"","offer_id":54475705680182,"sku":"SH-31.8-40-1","price":97.0,"currency_code":"USD","in_stock":true},{"title":"Red Anodized \/ 80mm \/ 3.00\"","offer_id":54475705712950,"sku":"SH-31.8-80-3","price":97.0,"currency_code":"USD","in_stock":true},{"title":"Red Anodized \/ 40mm \/ 1.50\"","offer_id":54475705745718,"sku":"SH-31.8-40-3","price":97.0,"currency_code":"USD","in_stock":true},{"title":"Blue Anodized \/ 80mm \/ 3.00\"","offer_id":54475705778486,"sku":"SH-31.8-80-4","price":97.0,"currency_code":"USD","in_stock":true},{"title":"Blue Anodized \/ 40mm \/ 1.50\"","offer_id":54475705811254,"sku":"SH-31.8-40-4","price":97.0,"currency_code":"USD","in_stock":true},{"title":"Magnesium Anodized \/ 80mm \/ 3.00\"","offer_id":54475705844022,"sku":"SH-31.8-80-6","price":97.0,"currency_code":"USD","in_stock":true},{"title":"Magnesium Anodized \/ 40mm \/ 1.50\"","offer_id":54475705876790,"sku":"SH-31.8-40-6","price":97.0,"currency_code":"USD","in_stock":true},{"title":"Gold Anodized \/ 80mm \/ 3.00\"","offer_id":54475705909558,"sku":"SH-31.8-80-9","price":97.0,"currency_code":"USD","in_stock":true},{"title":"Gold Anodized \/ 40mm \/ 1.50\"","offer_id":54475705942326,"sku":"SH-31.8-40-9","price":97.0,"currency_code":"USD","in_stock":true},{"title":"Purple Anodized \/ 80mm \/ 3.00\"","offer_id":54475705975094,"sku":"SH-31.8-80-V","price":97.0,"currency_code":"USD","in_stock":true},{"title":"Purple Anodized \/ 40mm \/ 1.50\"","offer_id":54475706007862,"sku":"SH-31.8-40-V","price":97.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/SH-31.8-80-0.jpg?v=1787785036"},{"product_id":"warp9-250mm-bracket-for-warp-9-triple-clamp-and-fastace-fork-combo","title":"250mm Bracket for Warp 9 Triple Clamp and Fastace Fork Combo","description":"\u003cp\u003eThis bracket lets a 250mm aftermarket brake rotor be run on the Warp 9 and Fastace +20mm wide front end fork kit. It is a fork kit part, not a universal adapter, so it is only for bikes already fitted with that front end.\u003c\/p\u003e\u003cp\u003eCaliper bolt spacing is 75mm, the mountain bike standard, so it works with calipers on that pattern. It will not work with 100mm bolt spacing calipers, and Warp 9 lists it as incompatible with Volar, the Talaria Sting MX5, E-Ride 3.0 and SR, the Altis Sigma and the Surron Ultra Bee. Confirm your caliper bolt spacing and rotor diameter before ordering, since both have to match.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475706925366,"sku":"S-FB250-FASTACE","price":33.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/S-FB250-FASTACE3_edited_bd9d1276-69c4-45bd-85c2-239cdaf76cad.jpg?v=1787785040"},{"product_id":"warp9-rawrr-mantis-x-mini-elite-foot-pegs","title":"Warp 9 Rawrr Mantis X \u0026 Mini Elite Foot Pegs","description":"\u003cp\u003eElite foot pegs cut for the Mantis X and the Mantis Mini. Warp 9 states these do not fit the standard Rawrr Mantis, so confirm which model is in the garage before ordering. They are forged from 7075-T6 aluminum and then CNC machined.\u003c\/p\u003e\u003cp\u003eThe platform is 3 5\/8 by 2 3\/8 inches, or 89 by 58mm, which is a large step up from a narrow stock peg and makes standing on rough ground far less tiring. They sit 1\/4 inch back from the original peg location and reuse the stock springs and pivot pins. Teeth are stainless, with titanium teeth and peg sliders offered separately. Four anodized finishes are available.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Silver Anodized","offer_id":54475706990902,"sku":"EP-45-1","price":142.0,"currency_code":"USD","in_stock":true},{"title":"Black Anodized","offer_id":54475707023670,"sku":"EP-45-2","price":142.0,"currency_code":"USD","in_stock":true},{"title":"Red Anodized","offer_id":54475707056438,"sku":"EP-45-3","price":142.0,"currency_code":"USD","in_stock":true},{"title":"Purple Anodized","offer_id":54475707089206,"sku":"EP-45-V","price":142.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/EP-47-V_b1d9c4e7-daf4-4e61-bb6e-7a906f638188.jpg?v=1787785043"},{"product_id":"warp9-warp-9-v3-rotor-hub-spacer","title":"Warp 9 V3 Rotor Hub Spacer","description":"\u003cp\u003eThe adapter that lets a stock Surron rear rotor, which has its own bolt pattern, be used on a Warp 9 V3 hub. It is the part that saves buying a new rotor when a wheel is rebuilt around a Warp 9 hub and the original disc is still in good condition.\u003c\/p\u003e\u003cp\u003eIt works on the front or the rear hub. Check the rotor thickness at the braking surface before reusing it: a disc that has worn below its minimum is the usual reason a brake feels vague even with new pads, and it is worth finding out before the wheel is laced rather than after. Torque the rotor bolts in a cross pattern.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475711250742,"sku":"S-HUBSPACER-V3","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/S-HUBSPACER-V32_3a5a2f53-ee6d-47f2-82f8-ce749078a3d7.jpg?v=1787785060"},{"product_id":"warp9-bar-straps","title":"Warp 9 Bar Straps","description":"\u003cp\u003eA set of reusable rubber straps for tidying cables, wiring and brake hoses on the handlebars. They do the job zip ties do, except they can be adjusted and opened again, which matters on a part of the bike that gets taken apart often.\u003c\/p\u003e\u003cp\u003eEach kit contains four straps: two standard and two adjustable length, so the same kit covers a thin throttle cable and a thicker brake hose bundle. They replace stock part numbers 01609630, 44011076200, 60011093045, 60011093075, 60011093060 and STD-RB-0007. Route the brake hose with enough slack for full steering lock before pulling any of them tight.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475712201014,"sku":"MH-BARSTRAPS-2","price":11.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/MH-BARSTRAPS-21.jpg?v=1787785068"},{"product_id":"warp9-shock-cover","title":"Warp 9 Shock Cover","description":"\u003cp\u003eA neoprene cover that wraps around the rear shock and keeps mud, rocks and trail debris off the shock shaft. A scored shaft tears seals and turns into a leaking shock, so this is a cheap part that protects an expensive one.\u003c\/p\u003e\u003cp\u003eThe neoprene is 4mm thick for abrasion and impact resistance, and it is cut for e-moto shocks with a 10.5 inch bolt-to-bolt length. The split-back Velcro closure means the shock does not have to come out of the bike to fit it: wrap it around, close the Velcro and it is done. Measure your shock bolt to bolt before ordering, and pull the cover off to rinse behind it after muddy rides.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475712233782,"sku":"S-SHOCKCOVER-2","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/S-SHOCKCOVER-21.jpg?v=1787785068"},{"product_id":"warp9-helmet-hook","title":"Warp 9 Helmet Hook","description":"\u003cp\u003eA machined aluminum hook that clamps to the handlebar and gives a helmet somewhere to hang while the bike is parked. It is a small part that saves an expensive one, since a helmet balanced on a seat or a bar end usually ends up on the ground.\u003c\/p\u003e\u003cp\u003eIt is machined from 7075-T6 aluminum and clamps to 7\/8 inch handlebars. Two stainless screws are included. Warp 9 recommends fitting it on the kickstand side of the bars, so the weight of the helmet pulls toward the side the bike is already leaning on rather than against it. Check lever and control clearance before tightening it down.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475748344118,"sku":"S-HELMETHOOK-2","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/S-HELMENTHOOK-2-un-mounted_ddcac58c-243c-4aa3-958d-54effff2b38e.jpg?v=1787785111"},{"product_id":"warp9-e-moto-titanium-sprocket-bolts","title":"Warp 9 E-Moto Titanium Sprocket Bolts","description":"\u003cp\u003eTitanium bolts for the rear sprocket on lightweight e-moto bikes, cut for the common sprocket pattern shared across the Surron, Talaria, E-Ride Pro, 79BIKE and Rawrr platforms. They replace the steel hardware that holds the sprocket to the carrier.\u003c\/p\u003e\u003cp\u003eSprocket bolts live directly behind the rear wheel and take everything the tire throws forward, so steel ones rust and seize while the sprocket is still good. Titanium avoids that. They are worth fitting at the same time as a sprocket change rather than as a separate job, since the sprocket has to come off either way. Torque them in a cross pattern and recheck after the first ride.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475755127094,"sku":"S-TIRSBOLT-B","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/S-TISBOLT-B-kit-scaled.jpg?v=1787785115"},{"product_id":"warp9-e-moto-titanium-rotor-bolts-rawr","title":"Warp 9 E-Moto Titanium Rotor Bolts - Rawr","description":"\u003cp\u003eThe titanium rotor bolt kit in the Rawrr Mantis fitment, in burnt blue anodizing. Choose the front or the rear kit to match the wheel being worked on, since the two are not interchangeable and the rear kit is priced differently.\u003c\/p\u003e\u003cp\u003eThreads are rolled rather than cut, which makes a stronger bolt and lets it hold its torque figure properly. The drive is T25 Torx, which is far harder to round out than an Allen head once the bolt heads have collected mud and brake dust. Titanium does not rust or corrode the way steel hardware does. Blue thread locker is included, and rotor bolts are one of the places it should always be used.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"OEM \/ Rear","offer_id":54475756077366,"sku":"S-TIFROTOR-B","price":70.0,"currency_code":"USD","in_stock":true},{"title":"OEM \/ Front","offer_id":54475756110134,"sku":"S-TIFROTOR-B","price":31.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/S-TIFROTOR-B-kit-scaled_e6390954-3127-47d3-bc7e-2de62ca5d9ec.jpg?v=1787785120"},{"product_id":"warp9-rawr-sigma-sprocket","title":"Warp 9 Rawrr \/ Altis Sigma Sprocket","description":"\u003cp\u003eA rear sprocket machined from 7075-T6 aluminum for the Rawrr Mantis and the Altis Sigma, cut in the original 428 chain pitch. Six tooth counts are listed: 40, 42, 44, 48, 54 and 58.\u003c\/p\u003e\u003cp\u003eAluminum keeps weight off the outside of the wheel, where it costs the most in both acceleration and suspension response, at the cost of wearing faster than steel. Black anodizing is offered across the range and red on the 48 tooth. Extra chain links are not included, so a large jump up in tooth count may also need a longer chain. Check the front sprocket for hooked teeth while the rear is off.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Black Anodized \/ 40 TOOTH","offer_id":54475757027638,"sku":"R-MSPRO-40","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Black Anodized \/ 42 TOOTH","offer_id":54475757060406,"sku":"R-MSPRO-42","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Black Anodized \/ 44 TOOTH","offer_id":54475757093174,"sku":"R-MSPRO-44","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Black Anodized \/ 48 TOOTH","offer_id":54475757125942,"sku":"R-MSPRO-48","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Black Anodized \/ 54 TOOTH","offer_id":54475757158710,"sku":"R-MSPRO-54","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Black Anodized \/ 58 TOOTH","offer_id":54475757191478,"sku":"R-MSPRO-58","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Red Anodized \/ 48 TOOTH","offer_id":54475757224246,"sku":"R-MSPRO-48-3A","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/R-MSPRO-58_cce1238b-48e6-4d39-be1b-d453ee812fd7.jpg?v=1787785122"},{"product_id":"warp9-bar-mount","title":"Warp 9 Bar Mount","description":"\u003cp\u003eThe Transformer direct bar mount stem, CNC machined from 7075-T6 aluminum. It moves the handlebars 10mm forward and sits at stock height in the low position, with a spacer in the box to gain 20mm of height. Bolts for both configurations are included, so the cockpit can be changed later without buying more parts.\u003c\/p\u003e\u003cp\u003eIt fits 31.8mm bars, stock or Warp 9, and 28.6mm MX bars using the supplied shims. It also fits Fox, Manitou, EXT MX, RST, DNM, DVO and KKE forks with a standard four bolt downhill top triple clamp. Once the original steer bar mount comes off, steer tube spacers are needed to take up the difference; the Warp 9 stem lock includes them, or they can be sourced separately.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Silver","offer_id":54475785535798,"sku":"S-BARCLAMP-1","price":109.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":54475785568566,"sku":"S-BARCLAMP-2","price":109.0,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":54475785601334,"sku":"S-BARCLAMP-3","price":109.0,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":54475785634102,"sku":"S-BARCLAMP-4","price":109.0,"currency_code":"USD","in_stock":true},{"title":"Magnesium","offer_id":54475785666870,"sku":"S-BARCLAMP-6","price":109.0,"currency_code":"USD","in_stock":true},{"title":"Gold","offer_id":54475785699638,"sku":"S-BARCLAMP-9","price":109.0,"currency_code":"USD","in_stock":true},{"title":"Purple","offer_id":54475785732406,"sku":"S-BARCLAMP-V","price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/20220715_085118_edited-scaled.jpg?v=1787785402"},{"product_id":"warp9-e-moto-31-8mm-handlebars","title":"Warp 9 E-Moto 31.8mm Handlebars","description":"\u003cp\u003eWarp 9's own e-moto handlebar, tapered so the center section is thicker and the ends are thinner. That gives a bar that is strong where it is clamped and still has some flex at the grips, which is what keeps a stiff bar from beating up your hands on a long ride.\u003c\/p\u003e\u003cp\u003eThe clamp diameter is 31.8mm, width is 770mm, rise is 80mm or three inches, back sweep is 9 degrees and up sweep is 5 degrees. The material is 7075-T7 aluminum. The clamping area is fully bead blasted for grip inside the clamp and a durable finish outside it, the logo is lasered on, and centering and alignment marks are lasered into the bar so it can be set square. Eight finishes are offered.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"White","offer_id":54475785961782,"sku":"S-HBAR-0","price":95.0,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":54475785994550,"sku":"S-HBAR-1","price":87.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":54475786027318,"sku":"S-HBAR-2","price":87.0,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":54475786060086,"sku":"S-HBAR-3","price":87.0,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":54475786092854,"sku":"S-HBAR-4","price":87.0,"currency_code":"USD","in_stock":true},{"title":"Magnesium","offer_id":54475786125622,"sku":"S-HBAR-6","price":87.0,"currency_code":"USD","in_stock":true},{"title":"Gold","offer_id":54475786158390,"sku":"S-HBAR-9","price":87.0,"currency_code":"USD","in_stock":true},{"title":"Purple","offer_id":54475786191158,"sku":"S-HBAR-V","price":87.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/S-HBAR-2-CENTER.jpg?v=1787785404"},{"product_id":"warp9-e-moto-sprocket","title":"Warp 9 E-Moto Sprocket","description":"\u003cp\u003eWarp 9's core rear sprocket for e-moto bikes, offered in aluminum or stainless steel across a wide run of tooth counts. Aluminum saves rotating weight at the outside of the wheel, where weight costs the most; stainless steel lasts considerably longer before the teeth hook over.\u003c\/p\u003e\u003cp\u003eTooth counts run from 40 up to 64. Fewer teeth raise top speed and lose low-end pull, more teeth do the reverse, which is why riders often keep two on the shelf and swap by terrain. Seven anodized finishes are offered plus an unfinished option. Extra chain links are not included, so a large jump in tooth count may need a longer chain as well as the sprocket.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Aluminum \/ 40 TOOTH \/ Black Anodized","offer_id":54475787043126,"sku":"S-RSPRO-40","price":42.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 42 TOOTH \/ Black Anodized","offer_id":54475787075894,"sku":"S-RSPRO-42","price":44.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 48 TOOTH \/ Red Anodized","offer_id":54475787108662,"sku":"S-RSPRO-48-3A","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 48 TOOTH \/ Black Anodized","offer_id":54475787141430,"sku":"S-RSPRO-48","price":48.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 48 TOOTH \/ Magnesium Anodized","offer_id":54475787174198,"sku":"S-RSPRO-48-6A","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 48 TOOTH \/ Purple Anodized","offer_id":54475787206966,"sku":"S-RSPRO-48-VA","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 48 TOOTH \/ Gold Anodized","offer_id":54475787239734,"sku":"S-RSPRO-48-9A","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 48 TOOTH \/ Blue Anodized","offer_id":54475787272502,"sku":"S-RSPRO-48-4A","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 50 TOOTH \/ Black Anodized","offer_id":54475787305270,"sku":"S-RSPRO-50","price":50.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 52 TOOTH \/ Black Anodized","offer_id":54475787338038,"sku":"S-RSPRO-52","price":53.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 54 TOOTH \/ Red Anodized","offer_id":54475787370806,"sku":"S-RSPRO-54-3A","price":63.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 54 TOOTH \/ Black Anodized","offer_id":54475787403574,"sku":"S-RSPRO-54","price":56.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 54 TOOTH \/ Magnesium Anodized","offer_id":54475787436342,"sku":"S-RSPRO-54-6A","price":63.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 54 TOOTH \/ Purple Anodized","offer_id":54475787469110,"sku":"S-RSPRO-54-VA","price":63.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 54 TOOTH \/ Gold Anodized","offer_id":54475787501878,"sku":"S-RSPRO-54-9A","price":63.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 54 TOOTH \/ Blue Anodized","offer_id":54475787534646,"sku":"S-RSPRO-54-4A","price":63.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 58 TOOTH \/ Red Anodized","offer_id":54475787567414,"sku":"S-RSPRO-58-3A","price":67.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 58 TOOTH \/ Black Anodized","offer_id":54475787600182,"sku":"S-RSPRO-58","price":60.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 58 TOOTH \/ Magnesium Anodized","offer_id":54475787632950,"sku":"S-RSPRO-58-6A","price":67.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 58 TOOTH \/ Purple Anodized","offer_id":54475787665718,"sku":"S-RSPRO-58-VA","price":67.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 58 TOOTH \/ Gold Anodized","offer_id":54475787698486,"sku":"S-RSPRO-58-9A","price":67.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 58 TOOTH \/ Blue Anodized","offer_id":54475787731254,"sku":"S-RSPRO-58-4A","price":67.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 60 TOOTH \/ Black Anodized","offer_id":54475787764022,"sku":"S-RSPRO-60","price":62.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 62 TOOTH \/ Black Anodized","offer_id":54475787796790,"sku":"S-RSPRO-62","price":66.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 64 TOOTH \/ Black Anodized","offer_id":54475787829558,"sku":"S-RSPRO-64","price":68.0,"currency_code":"USD","in_stock":true},{"title":"Stainless steel \/ 54 TOOTH \/ Unfinished","offer_id":54475787862326,"sku":"S-SS-RSPRO-54","price":35.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 52 TOOTH \/ Red Anodized","offer_id":54475787895094,"sku":"S-RSPRO-52-3A","price":60.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 52 TOOTH \/ Blue Anodized","offer_id":54475787927862,"sku":"S-RSPRO-52-4A","price":60.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 52 TOOTH \/ Gold Anodized","offer_id":54475787960630,"sku":"S-RSPRO-52-9A","price":60.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 52 TOOTH \/ Magnesium Anodized","offer_id":54475787993398,"sku":"S-RSPRO-52-6A","price":60.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 52 TOOTH \/ Purple Anodized","offer_id":54475788026166,"sku":"S-RSPRO-52-VA","price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/42-TOOTH-S-RSPRO-42.jpg?v=1787785412"},{"product_id":"warp9-stem-lock-replacement-bolt","title":"Warp 9 Stem Lock Replacement Bolt","description":"\u003cp\u003eThe replacement bolt for a Warp 9 Stem Lock, updated with a Torx T45 head in place of the hex head used on the earlier design. A Torx socket grips the whole head rather than six corners, which is what keeps it from rounding out on a bolt that is torqued and then left alone for a season.\u003c\/p\u003e\u003cp\u003eIt is machined from 7075-T6 aluminum and black anodized. It is a service part and works with the Warp 9 Steer Lock kit only. Warp 9 recommends anti-seize on the bottom inch of the threads, which is worth doing: an aluminum bolt threaded into a steering tube that sees water is the classic place for a seized fastener.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475788353846,"sku":"S-STEERBOLT-T45","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/S-STEERBOLT-T45-002_edited-scaled.jpg?v=1787785417"},{"product_id":"warp9-tow-rope","title":"Warp 9 Tow Rope","description":"\u003cp\u003eA tow rope small enough to live in a pack and strong enough to drag a dead e-moto out. It is 3.5mm 12-strand Spectra, also called UHMWPE, at 20 feet long with a 2,200 lb break strength, so it packs down to almost nothing.\u003c\/p\u003e\u003cp\u003eBoth ends are double looped, and each loop is sheathed in Kevlar at the point where abrasion actually happens: over an axle, a peg or a bar. That is the part of a tow rope that fails first, and it is why a bare Spectra loop does not last. Tow gently and keep tension steady rather than snatching, since a rope this thin will cut into anything it saws across.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475788419382,"sku":"89-TOWROPE-20","price":19.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/20230823_113806-scaled.jpg?v=1787785418"},{"product_id":"warp9-e-bike-front-fender-adapter","title":"Warp 9 E-Bike Front Fender Adapter","description":"\u003cp\u003eAn adapter that lets a stock style Surron front fender bolt to a Warp 9 stem lock. It solves the gap left when the original fender mounting is removed as part of a front end change, so the fender can go back on rather than being left off.\u003c\/p\u003e\u003cp\u003eTwo tapered head screws are included to fasten the adapter to the stem lock. The fender itself mounts to the adapter using the original fender bolts, which are three M6 x 16mm bolts with three M6 washers of 10mm outside diameter, so keep those when the fender comes off. It works only with the Warp 9 stem lock, and it will not work on conventional forks with a cross brace such as Fox 40, RST or DVO.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475788484918,"sku":"S-FENDERBRACKET","price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/surron-fender-bracket1.jpg?v=1787785422"},{"product_id":"warp9-e-moto-428-chain","title":"Warp 9 E-Moto 428 Chain","description":"\u003cp\u003eAn EK SH series chain in 428 pitch and gold finish, supplied at 120 links. That length covers a rear sprocket up to 60 teeth, and it is cut down to suit whatever gearing is actually fitted, so one part number covers a range of setups.\u003c\/p\u003e\u003cp\u003eIt is a non O-ring chain with gold inner and outer plates and quad staked pins. Count the links you need against your current chain before cutting, since a chain cut short cannot be put back. A non O-ring chain needs cleaning and lubricating more often than a sealed one, particularly after riding in mud or sand, so factor that into your maintenance routine.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475788517686,"sku":"428SHDR-120G","price":83.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/image001.png?v=1787785423"},{"product_id":"warp9-front-wheel-boost-spacer","title":"Warp 9 Front Wheel Boost Spacer","description":"\u003cp\u003eA 5mm boost spacer for the front wheel, used when a wide downhill fork puts the hub flange out of line with the rotor. Warp 9 lists it against forks including the Fox 40, EXT Ferro and Manitou Dorado, though it is not limited to those.\u003c\/p\u003e\u003cp\u003eSix M5 x 16mm steel bolts are included, with button head Torx 25 drive and blue thread locker already applied. Burnt blue titanium bolts are available separately under part number S-TI-BOOST5MM-B. Check rotor to caliper alignment after fitting, since moving the rotor 5mm outboard is the whole point of the part and the caliper has to follow it.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475788583222,"sku":"S-BOOST5MM-2","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/S-BOOST5MM-2-scaled.jpg?v=1787785423"},{"product_id":"warp9-e-moto-handguard-titanium-bolt-kit","title":"Warp 9 E-Moto Handguard Titanium Bolt Kit","description":"\u003cp\u003eThe titanium hardware kit for Warp 9 handguards, finished in burnt blue. It replaces the steel bolts the guards come with, which are the fasteners most exposed to weather and to the ground when the bike goes over.\u003c\/p\u003e\u003cp\u003eThe kit contains four pinch bolts and two button bolts for the plastic flag. It is made for Warp 9 handguards and is bought alongside them rather than instead of the guards. Titanium does not rust, so these stay serviceable through more seasons than plated steel. Keep the original hardware in a bag in case the guards move to another bike later, and use a torque wrench on the pinch bolts rather than guessing.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475789173046,"sku":"S-TIHANDGUARD-B","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/20220715_092911_edited-scaled.jpg?v=1787785436"},{"product_id":"warp9-surron-light-bee-talaria-sting-bar-mount-titanium-bolt-kit","title":"Warp 9 Surron Light Bee\/Talaria Sting Bar Mount Titanium Bolt Kit","description":"\u003cp\u003eThe titanium bolt kit for the Warp 9 Transformer direct bar mount, in a burnt blue anodized finish. Bar mount bolts sit at the very top of the bike where they are seen on every ride and where they collect weather, so they are one of the more visible places to change hardware.\u003c\/p\u003e\u003cp\u003eBoth the low setting bolts and the high setting bolts are included, so the cockpit height can be changed later without needing more hardware. Blue thread locker is included. The mounting bracket itself is not included: these bolts work only with a Warp 9 bar clamp, so this is bought alongside one rather than instead of it.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475789205814,"sku":"S-TIBARMOUNT-B","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/20220715_112229_edited-1-scaled.jpg?v=1787785437"},{"product_id":"warp9-surron-talaria-220mm-caliper-adapter-spacer-kit","title":"Warp 9 Surron\/Talaria 220mm Caliper Adapter Spacer Kit","description":"\u003cp\u003eThe spacer kit that moves a caliper out from the 203mm stock rotor position to suit a 220mm rotor. It is the part that makes a rotor upgrade actually bolt up, and it is easy to overlook when ordering the rotor itself.\u003c\/p\u003e\u003cp\u003eTwo spacers and two longer bolts are included. It fits the original brake bracket and the Warp 9 disk guard, and it works on both the front and the rear caliper. Warp 9 lists it as working with the original brown caliper, the newer green piston caliper, and Hope and Hayes brakes. Check the caliper is centered over the new rotor before riding, and bed the pads in gradually.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475789402422,"sku":"S-R220SPACER-2","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/S-RS220SPACER.jpg?v=1787785440"},{"product_id":"warp9-e-moto-front-brake-rotor-adapter","title":"Warp 9 E-Moto Front Brake Rotor Adapter","description":"\u003cp\u003eAn adapter that lets a fork with a 203mm post mount run a larger front rotor without changing the caliper. Choose the 220mm or the 240mm version to match the rotor being fitted, since the bracket position is specific to rotor diameter.\u003c\/p\u003e\u003cp\u003eIt is CNC machined from 6061-T6 aluminum and black anodized. Four low profile nickel coated Torx head bolts and blue thread locker are supplied. It works with the stock caliper. This is a front wheel part only and will not fit a rear caliper bracket. Bed the new rotor and pads in gently for the first few stops, and check the caliper is centered over the rotor before the first ride.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"220mm","offer_id":54475789533494,"sku":"S-FB220","price":33.0,"currency_code":"USD","in_stock":true},{"title":"240mm","offer_id":54475789566262,"sku":"S-FB240","price":33.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/S-FB220-scaled.jpg?v=1787785442"},{"product_id":"warp9-ek-420sh-e-moto-chain","title":"Warp 9 EK 420SH E-Moto Chain","description":"\u003cp\u003eAn EK 420SH chain in gold, supplied at 120 links with a C clip master link in the box. It is a non O-ring chain, which means less drag in the driveline than a sealed chain and more frequent cleaning and lubrication in exchange.\u003c\/p\u003e\u003cp\u003ePlates are gold inner and outer, with black carbon rollers. Warp 9 lists the link count for each rear sprocket size: 104 links for a 42 tooth, 106 for the 48 tooth stock size, 108 for a 52, 110 for a 54, 112 for a 56 or 58, 114 for a 60 and 116 for a 64. Count the links you need before cutting, since a chain cut short cannot be lengthened.\u003c\/p\u003e","brand":"Warp 9 Racing","offers":[{"title":"Default Title","offer_id":54475790057782,"sku":"420SH-120G","price":63.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/external-content.duckduckgo.jpg?v=1787785454"},{"product_id":"dirtybike-125a-single-phase-circuit-breaker","title":"DirtyBike 125A Single Phase Circuit Breaker","description":"\u003cp\u003eA 125 amp single phase circuit breaker. On the Surron Light Bee X it is an upgrade over the stock breaker, and on the Talaria Sting MX4 and Rawrr Mantis it is a direct replacement. The higher rating is what makes it worth fitting alongside an aftermarket controller, which will draw more than the stock breaker was sized for.\u003c\/p\u003e\u003cp\u003eSold as a single item, shipping weight 0.37 lb. Verified against the Surron Light Bee X, Talaria Sting R, Talaria Sting MX4 and Rawrr Mantis. A breaker is a safety device rather than a tuning part, so size it to the controller you are actually running, and reset it by hand after a trip rather than riding on through a repeat fault.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Default Title","offer_id":54486752198966,"sku":"TS-CP-125A","price":16.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/Rawrr-Mantis-db-circuit-protector.jpg?v=1788105034"},{"product_id":"dirtybike-aluminum-rear-sprocket","title":"DirtyBike Aluminum Rear Sprocket","description":"\u003cp\u003eFaster acceleration, better hill climbing, and longer run time with only a small reduction in top speed.\u003c\/p\u003e\u003cp\u003eThese sprockets require a longer 420 chain. You can add a few links to your existing chain but it is always recommended to install a new chain when new sprockets are installed. The length of chain needed depends on what size sprocket you are using.\u003c\/p\u003e\u003cp\u003eKeep sprockets aligned for minimum wear and greater efficiency with the DirtyBike Laser Chain Alignment Tool.\u003c\/p\u003e\u003cp\u003eFits the Surron Light Bee X, Talaria Sting R, Talaria Sting MX3, Talaria Sting MX4, E-Ride Pro SS, Rawrr Mantis.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Black 60T","offer_id":54486752723254,"sku":null,"price":49.0,"currency_code":"USD","in_stock":true},{"title":"Red 60T","offer_id":54486752756022,"sku":null,"price":49.0,"currency_code":"USD","in_stock":true},{"title":"Raw 58T","offer_id":54486752788790,"sku":null,"price":48.0,"currency_code":"USD","in_stock":true},{"title":"Raw 60T","offer_id":54486752821558,"sku":null,"price":49.0,"currency_code":"USD","in_stock":true},{"title":"Red 58T","offer_id":54486752854326,"sku":null,"price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/Surron-LBX-Talaria-db-Aluminum-RearSprocket-BLACK.jpg?v=1788105041"},{"product_id":"dirtybike-bearing-kit-front-wheel","title":"DirtyBike Bearing Kit Front Wheel","description":"\u003cp\u003eLoose, gritty, or crunchy front wheel bearings? Don’t wait until they fail on the trail. The DirtyBike Front Wheel Bearing Kit is a direct replacement for worn front wheel bearings on Sur-Ron Light Bee, Talaria Sting, E Ride Pro, and Rawrr Mantis X bikes.\u003c\/p\u003e\u003cp\u003eThis kit includes two precision deep-groove rubber-sealed bearings and two Buna axle spacer O-rings. Torn or missing spacer O-rings are a common reason water, dirt, and grit make their way into the front wheel hub, shortening bearing life and creating that loose or gritty feel at the axle.\u003c\/p\u003e\u003cp\u003eBuilt for riders who actually ride, this kit helps restore smooth front wheel rotation, proper axle support, and long-lasting reliability.\u003c\/p\u003e\u003cp\u003eIf your front wheel bearings feel rough, loose, or gritty, the bearings may not be the only problem. The axle spacer O-rings help seal the hub area and keep contaminants out. When they are torn, flattened, or missing, dirt and water can get past the spacer and into the bearings.\u003c\/p\u003e\u003cp\u003eReplacing the bearings and O-rings together gives your front wheel the best chance at staying smooth, tight, and reliable.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDirect replacement front wheel bearing kit\u003c\/li\u003e\n\u003cli\u003eIncludes 2 precision deep-groove rubber-sealed bearings\u003c\/li\u003e\n\u003cli\u003eIncludes 2 Buna axle spacer O-rings\u003c\/li\u003e\n\u003cli\u003eHelps fix loose, gritty, or worn front wheel bearings\u003c\/li\u003e\n\u003cli\u003eReplaces damaged or missing axle spacer O-rings\u003c\/li\u003e\n\u003cli\u003eSealed bearings help protect against dirt, water, and trail debris\u003c\/li\u003e\n\u003cli\u003eGreat maintenance item for off-road and race bikes\u003c\/li\u003e\n\u003cli\u003eSur-Ron Light Bee \/ LBX\u003c\/li\u003e\n\u003cli\u003eTalaria Sting and XXX\u003c\/li\u003e\n\u003cli\u003eE Ride Pro\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFits the Surron Light Bee X, Talaria Sting R, Talaria Sting MX3, Talaria Sting MX4, E-Ride Pro SS, Rawrr Mantis.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Default Title","offer_id":54486752952630,"sku":"LB-FWBK-ZY","price":16.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/Surron-LightBee-db-front-wheel-bearings_01adbb9d-b4d8-4431-8490-944c10be80d7.jpg?v=1788105045"},{"product_id":"dirtybike-handlebar-riser","title":"DirtyBike Handlebar Riser","description":"\u003cp\u003eLooking for a better riding position on your Light Bee, Talaria, Rawrr Mantis X or E Ride Pro? This Solid mount 6061 T6 aluminum handlebar riser raises your handlebars 50mm for a more comfortable riding position.\u003c\/p\u003e\u003cp\u003eMounts to your triple clamp instead of the less stable stock tube mount for a more secure connection, especially when riding aggressively.\u003c\/p\u003e\u003cp\u003eAnodized aluminum for durability and great looks with stainless steel hardware included. Fits Light Bee, Talaria Sting MX3, MX4, MX5 and XXX, E Ride Pro, and Rawrr Mantis X.\u003c\/p\u003e\u003cp\u003eFits the Surron Light Bee X, Talaria Sting R, Talaria Sting MX3, Talaria Sting MX4, E-Ride Pro SS, Rawrr Mantis.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Black","offer_id":54486754492726,"sku":"db-SMHR-A-BK","price":99.0,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":54486754525494,"sku":"db-SMHR-A-BL","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/Solid-Mount-Handlebar-Riser-Blue_64cce1fd-f8d6-41da-81e2-da1bd08e4038.webp?v=1788105076"},{"product_id":"dirtybike-heavy-duty-rim-lock","title":"DirtyBike Heavy Duty Rim Lock","description":"\u003cp\u003eA must for aggressive off-road riding, this off road rim lock from DirtyBike allows you to lower your tire pressure to instantly increase traction while preventing your tire from slipping on the rim and damaging your inner tube.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits 1.4 – 1.6\" rims\u003c\/li\u003e\n\u003cli\u003eHeavy duty die cast aluminum body\u003c\/li\u003e\n\u003cli\u003eOver molded rubber to protect against abrasion of inner tube\u003c\/li\u003e\n\u003cli\u003eRibbed alloy contact surface locks tire securely to rim\u003c\/li\u003e\n\u003cli\u003eWeight 2.3oz\u003c\/li\u003e\n\u003cli\u003eRecommended tightening torque on nut is 14 foot-pound\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFits the Surron Light Bee X, Talaria Sting R, Talaria Sting MX3, Talaria Sting MX4, E-Ride Pro SS, Rawrr Mantis.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Default Title","offer_id":54486754558262,"sku":"DB-HDRL-1.6-O","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/Surron-LightBee-db-rimlock-heavy-duty-02.jpg?v=1788105077"},{"product_id":"dirtybike-rawrr-mantis-kill-switch","title":"DirtyBike Rawrr Mantis Kill Switch","description":"\u003cp\u003eNew AMA racing rules for electric motorbikes require a safety lanyard attached to the rider that kills power when rider is separated from their bike. Replaces your existing key switch.\u003c\/p\u003e\u003cp\u003eKill Switch That Replaces Stock Key Switch: Unplug your key switch and plug the new Safety Kill Switch directly into the original key switch connector.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEasy to connect and remove tether key\u003c\/li\u003e\n\u003cli\u003eInstantly kills the power if you are separated from your bike\u003c\/li\u003e\n\u003cli\u003eGreat for recreational riders or juniors\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFits the Rawrr Mantis.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Mantis X","offer_id":54486754951478,"sku":"DB-MKS-Mag1","price":39.0,"currency_code":"USD","in_stock":true},{"title":"Mantis","offer_id":54486754984246,"sku":"DB-MKS-MAG1-M","price":39.0,"currency_code":"USD","in_stock":true},{"title":"Mantis Mini","offer_id":54486755017014,"sku":"DB-MKS-MAG1-MM","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/db-DirtyBike-Kill-Switch-Magnetic-Surron-Talaria-ERidePro-01_a95bf599-ab2c-4120-abc0-dad13ae08f99.jpg?v=1788105089"},{"product_id":"dirtybike-rawrr-mantis-x-bearing-kit-rear-wheel","title":"DirtyBike Rawrr Mantis X Bearing Kit Rear Wheel","description":"\u003cp\u003eThe rear wheel bearing kit for the Rawrr Mantis. Rear wheel bearings carry chain tension on top of the weight of the bike, so they wear faster than the fronts, and once they go the wheel will not hold its line under power no matter how the axle is torqued.\u003c\/p\u003e\u003cp\u003eThe kit contains two precision deep groove sealed bearings and two double lip seals, sold as a kit at 0.25 lb shipping weight. Double sealing is what suits it to off-road use, where a single-seal bearing takes water at the first deep puddle. Verified against the Rawrr Mantis. Press new bearings in square and on the outer race only.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Default Title","offer_id":54486755049782,"sku":"RM-RWBK-ZY","price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/Rawrr-Mantis-rear-wheel-bearing-kit-02_70235c68-3f36-4f10-8926-53c7a0405d58.jpg?v=1788105089"},{"product_id":"dirtybike-rawrr-mantis-x-display-relocation-bracket-kit","title":"DirtyBike Rawrr Mantis X Display Relocation Bracket Kit","description":"\u003cp\u003eA bracket kit that relocates the Rawrr Mantis display. From the factory the gauge sits high and forward of the handlebars, which is the first thing to hit the ground in a crash and an expensive part to replace. This kit drops it onto the upper fork clamps where it is protected.\u003c\/p\u003e\u003cp\u003eIt mounts directly to the upper fork clamps and works with any bend of handlebar, so a bar swap does not undo it. Mounting hardware is included, and the brackets are hard anodized in black or silver, sold as a kit at 0.19 lb shipping weight. Verified against the Rawrr Mantis. Check the display cable has slack at full lock after fitting.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Black","offer_id":54486755082550,"sku":"RMX-DRK-A-B","price":35.0,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":54486755115318,"sku":null,"price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/Rawrr-Speedometer-Relocation-Bracket-onbike-02.jpg?v=1788105093"},{"product_id":"dirtybike-rawrr-mantis-x-mantis-mini-1-4-turn-electronic-magura-throttle","title":"DirtyBike Rawrr Mantis X Mantis Mini 1\/4 Turn Electronic Magura Throttle","description":"\u003cp\u003eUpgrade your throttle response with a genuine Magura throttle, calibrated in-house by DirtyBike for the correct voltage output and minimal dead band.\u003c\/p\u003e\u003cp\u003eEach throttle is inspected and adjusted before shipping for smooth, predictable operation. The wiring is securely attached to the housing to help reduce the risk of wires pulling loose during installation or use.\u003c\/p\u003e\u003cp\u003eTo provide enough clearance for the Magura throttle, the start\/stop switch housing must be moved inward approximately 10mm. This minor adjustment is required for proper fitment. See photo below for installation details.\u003c\/p\u003e\u003cp\u003eDirtyBike electronics allow this throttle to work properly with all models, including 2021 and newer controllers. These throttles are all assembled and calibrated in house and are dynamically tested for the proper closed and full throttle voltage. Includes high quality gray or black half waffle off road grips.\u003c\/p\u003e\u003cp\u003eTroubleshooting tips for a non-working throttle\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGenuine Magura throttle\u003c\/li\u003e\n\u003cli\u003eCalibrated in-house by DirtyBike\u003c\/li\u003e\n\u003cli\u003eAdjusted for minimal dead band\u003c\/li\u003e\n\u003cli\u003eSet for proper voltage output\u003c\/li\u003e\n\u003cli\u003eSecurely attached wiring\u003c\/li\u003e\n\u003cli\u003eDirect electrical connection with minor handlebar adjustment required\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFits the Rawrr Mantis.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Black Grips","offer_id":54486755148086,"sku":"RM-ET-M-B","price":119.0,"currency_code":"USD","in_stock":true},{"title":"Grey Grips","offer_id":54486755180854,"sku":"RM-ET-M-G","price":119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/Rawrr-Mantis-db-magura-throttle-on-bike-02_82933645-69fd-4518-bf35-ab0e539dff09.jpg?v=1788105094"},{"product_id":"dirtybike-replacement-slider-chain-guide","title":"DirtyBike Replacement Slider Chain Guide","description":"\u003cp\u003eThe replacement wear slider for DirtyBike chain guides. The slider is the sacrificial part of a chain guide: it wears from the inside out as the chain rubs it, and swapping it before it wears through is what stops the chain reaching the aluminum bracket behind it.\u003c\/p\u003e\u003cp\u003eIt is a direct replacement for all DirtyBike chain guides and for the Rawrr Mantis X and Mini guides. Four colors are listed, black, blue, red and one DirtyBike calls ugly, sold as a single item at 0.37 lb shipping weight. Verified against the Talaria Sting R, Talaria Sting MX3, Talaria Sting MX4 and Rawrr Mantis. Check it whenever you adjust chain tension.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Black","offer_id":54486755213622,"sku":"db-RCGS-BK","price":15.0,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":54486755246390,"sku":"db-RCGS-BU","price":15.0,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":54486755279158,"sku":"db-RCGS-R","price":15.0,"currency_code":"USD","in_stock":true},{"title":"Ugly","offer_id":54486755311926,"sku":"db-RCGS-U","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/IMG_5635.png?v=1788105095"},{"product_id":"all-emoto-handlebars","title":"All Emoto Handlebars","description":"\u003cp\u003eA one-piece handlebar for e-moto and mountain bike use, cut 780mm wide with a 30mm rise and a 31.8mm center clamp. It is checked against the Surron Light Bee X and Surron Ultra Bee, the Talaria XXX and the Sting MX3, MX4, MX5 and R, the E-Ride Pro SS, the Rawrr Mantis, and the 79BIKE Falcon Pro, Falcon GT and Lynx.\u003c\/p\u003e\u003cp\u003eThe bar is high-strength alloy, which the maker specs for a mix of stiffness and vibration damping. Three versions are offered: Glossy Black V3, Mirror Chrome V3 and Glossy Black V1. Measure your clamp before ordering, since the 31.8mm center section is what decides whether the bar drops into your existing mount or riser.\u003c\/p\u003e","brand":"DevMoto","offers":[{"title":"Glossy Black V3 Bars","offer_id":54500705403190,"sku":"sku-47981951778979","price":46.99,"currency_code":"USD","in_stock":true},{"title":"Mirror Chrome V3 Bars","offer_id":54500705435958,"sku":"sku-47981951811747","price":46.99,"currency_code":"USD","in_stock":true},{"title":"Glossy Black V1 Bars","offer_id":54500705468726,"sku":"sku-47981951746211","price":46.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/IMG-3481.jpg?v=1788369498"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/collections\/mh-img-06.jpg?v=1786399627","url":"https:\/\/motorhabit.com\/collections\/rawr\/fits-fpro.oembed","provider":"MotorHabit","version":"1.0","type":"link"}