{"title":"DirtyBike","description":"\u003cp\u003e\u003cstrong\u003eDirtyBike Industries\u003c\/strong\u003e machines performance and maintenance parts for electric dirt bikes in New Smyrna Beach, Florida. They are best known for primary belt to chain conversion kits — the upgrade that replaces the stock belt drive with a 219 or 420 chain — and for sealed bearing kits that fix the loose, gritty pivots these bikes develop after a season of riding.\u003c\/p\u003e\u003cp\u003eThis collection covers the Sur-Ron Light Bee and Ultra Bee, Talaria Sting MX3, MX4, MX5 and XXX, E-Ride Pro and the Rawrr Mantis. Every part is listed with the exact platforms DirtyBike cuts it for, so the fitment filter and the garage can do the matching for you.\u003c\/p\u003e","products":[{"product_id":"dirtybike-surron-ultra-bee-swingarm-bearing-kit","title":"DirtyBike Surron Ultra Bee Swingarm Bearing Kit","description":"\u003cp\u003eYour swingarm pivot is a major load point in the chassis — absorbing suspension movement, acceleration forces, braking load, and lateral stress from hard cornering. When swingarm bearings wear out, you’ll feel rear-end instability, side-to-side play, inconsistent tracking, and vague suspension feedback.\u003c\/p\u003e\u003cp\u003eThe DirtyBike Swingarm Bearing Kit is engineered specifically for the SurRon Ultra Bee to restore tight pivot movement and structural precision.\u003c\/p\u003e\u003cp\u003eThis kit includes four high-quality precision deep groove ball bearings designed to handle combined radial and axial loads generated through the suspension linkage and rear wheel forces. Each bearing is double rubber sealed to help block out mud, water intrusion, fine grit, and pressure-washer spray — the primary causes of premature pivot wear in off-road riding.\u003c\/p\u003e\u003cp\u003eBy maintaining proper alignment at the swingarm pivot, these bearings help preserve rear suspension performance, improve handling consistency, and reduce long-term frame and pivot wear.\u003c\/p\u003e\u003cp\u003eFor proper removal without damaging the swingarm bore, use our Swingarm Bearing Removal Tool.\u003c\/p\u003e\u003cp\u003eBearing removal is easy with our Swingarm Bearing Removal Tool\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInner bearings must be removed from the inside.\u003c\/li\u003e\n\u003cli\u003eOuter bearings must be removed from the outside.\u003c\/li\u003e\n\u003cli\u003e(4) Precision deep groove double-sealed swingarm bearings\u003c\/li\u003e\n\u003cli\u003eSurRon Ultra Bee models\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFits the Surron Ultra Bee.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Default Title","offer_id":54486751445302,"sku":"UB-SABK-ZY","price":26.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/Surron-UltraBee-DirtyBike-BearingKit-Swingarm_9c11bfed-4d09-4d0c-a192-45365d40eca6.jpg?v=1788105207"},{"product_id":"dirtybike-125a-single-phase-circuit-breaker","title":"DirtyBike 125A Single Phase Circuit Breaker","description":"\u003cp\u003eA 125 amp single phase circuit breaker. On the Surron Light Bee X it is an upgrade over the stock breaker, and on the Talaria Sting MX4 and Rawrr Mantis it is a direct replacement. The higher rating is what makes it worth fitting alongside an aftermarket controller, which will draw more than the stock breaker was sized for.\u003c\/p\u003e\u003cp\u003eSold as a single item, shipping weight 0.37 lb. Verified against the Surron Light Bee X, Talaria Sting R, Talaria Sting MX4 and Rawrr Mantis. A breaker is a safety device rather than a tuning part, so size it to the controller you are actually running, and reset it by hand after a trip rather than riding on through a repeat fault.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Default Title","offer_id":54486752198966,"sku":"TS-CP-125A","price":16.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/Rawrr-Mantis-db-circuit-protector.jpg?v=1788105034"},{"product_id":"dirtybike-219-primary-drive-replacement-chain","title":"DirtyBike 219 Primary Drive Replacement Chain","description":"\u003cp\u003eThe replacement 219 primary chain for DirtyBike 219 primary chain drive kits. Every chain in this listing is endless with no master link, which is the right call on a primary drive: a master link is the weak point and this run sits inside the case where a failure takes the cover with it.\u003c\/p\u003e\u003cp\u003eFive part numbers cover RK sealed O-ring in blue or orange, RK non-sealed, KMC non-sealed and RLV sealed. Chain pitch is 219, shipping weight 0.41 lb. Verified against the Surron Light Bee X and E-Ride Pro SS. DirtyBike also lists it for the 79BIKE, which is not a platform stocked here. Sealed chains last longer; non-sealed spin freer.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"RK Sealed O-Ring Blue","offer_id":54486752231734,"sku":"LB-PC-219RK-BL","price":58.0,"currency_code":"USD","in_stock":true},{"title":"RK Sealed O-Ring Orange","offer_id":54486752264502,"sku":"LB-PC-219RK-OR","price":58.0,"currency_code":"USD","in_stock":true},{"title":"RK Non-Sealed","offer_id":54486752297270,"sku":"LB-PC-219RK-NOR-G","price":43.0,"currency_code":"USD","in_stock":true},{"title":"KMC Non-Sealed","offer_id":54486752330038,"sku":"LB-PC-219KMC-G","price":29.0,"currency_code":"USD","in_stock":true},{"title":"RLV Sealed O-Ring Blue","offer_id":54486752362806,"sku":"RLV-PC-OR-BL","price":58.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/Talaria-XXX-Primary-Chain-Drive-219-RK-ASST_43a79111-25e8-4d66-a6b7-870c2cc7feff.jpg?v=1788105035"},{"product_id":"dirtybike-4-prong-double-ended-mid-shaft-nut-tool","title":"DirtyBike 4-Prong Double-Ended Mid Shaft Nut Tool","description":"\u003cp\u003eIf you own an E Ride Pro and a Surron Light Bee, this custom tool from DirtyBike was made for you! One end fits E Ride Pro S, SS, 2.0 and Sur-Ron Light Bee bikes with a 10mm intermediate shaft. The other end fits the E Ride Pro 3.0 and SR models with a 12mm shaft.\u003c\/p\u003e\u003cp\u003eDesigned specifically for removing the mid-shaft nut on light electric motorcycles, this double-ended tool allows fast, secure removal and installation of the jack shaft nut.\u003c\/p\u003e\u003cp\u003ePrecision-machined from steel, this heavy-duty tool simplifies routine maintenance and drivetrain service. The dual-use design adds versatility, reducing the number of specialty tools you need to keep on hand.\u003c\/p\u003e\u003cp\u003eIf you service your own bike, this tool turns a difficult job into a straightforward one – making midshaft maintenance quicker, easier and safer every time.\u003c\/p\u003e\u003cp\u003eTool works with a 1\/2\" ratchet extension to get the 4-prong nut off easily. A DirtyBike exclusive design.\u003c\/p\u003e\u003cp\u003eFits the Surron Light Bee X, E-Ride Pro SS.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Default Title","offer_id":54486752395574,"sku":"DB-MS-TOOL-4P-Dual-Bk","price":34.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/db-4-prong-mid-shaft-nut-tool-10-12mm-05.jpg?v=1788105036"},{"product_id":"dirtybike-420-final-drive-x-ring-chain","title":"DirtyBike 420 Final Drive X-Ring Chain","description":"\u003cp\u003eLow Drag and Long Lasting Reliability is what the DIrtyBike X-Ring chain provides for Surron LBX, Talaria Sting and E Ride Pro\u003c\/p\u003e\u003cp\u003eAdditionally, RK a well-respected manufacturer of dirt bike chains, that makes standard dirt bike chains, O-ring dirt bike chains and X-ring dirt bike chains indicates their X-ring chains last twice as long as their O-ring chains - roughly 20,000 miles vs. 10,000 miles.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes connecting \"master\" link\u003c\/li\u003e\n\u003cli\u003eThe X-ring has several advantages over the O-ring chain including: A standard O-ring, when squeezed between the inner and outer plates, deforms and has a large surface area\u003c\/li\u003e\n\u003cli\u003eAn X-ring seal placed between the inner and outer plates twists as opposed to being squashed. This creates two smaller sealing surfaces with less friction and wear\u003c\/li\u003e\n\u003cli\u003eAn X-ring distorts less than a standard O-ring, and the gap between the sealing surfaces does a better job of retaining grease\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFits the Surron Light Bee X, Talaria Sting R, Talaria Sting MX3, Talaria Sting MX4, E-Ride Pro SS.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"114 Links","offer_id":54486752428342,"sku":null,"price":40.5,"currency_code":"USD","in_stock":true},{"title":"112 Links","offer_id":54486752461110,"sku":null,"price":39.5,"currency_code":"USD","in_stock":true},{"title":"110 Links","offer_id":54486752493878,"sku":null,"price":38.5,"currency_code":"USD","in_stock":true},{"title":"108 Links","offer_id":54486752526646,"sku":null,"price":37.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/Dirtybike-Sur-Ron-Talaria-420-Chain3_1201532a-7e1c-4696-867c-5115e5f5cb48.webp?v=1788105039"},{"product_id":"dirtybike-aluminum-axle-blocks","title":"DirtyBike Aluminum Axle Blocks","description":"\u003cp\u003eCNC billet 60 series aluminum rear axle adjusting blocks. The stainless steel lollipop adjuster bolts are captive, so turning one moves the axle instead of backing the bolt out of the block, which is what makes a chain adjustment a two-minute job rather than a fight.\u003c\/p\u003e\u003cp\u003eThe adjuster bolt heads are 10mm. Hard anodized in black, blue, red, silver and gold, sold as a single item, shipping weight 0.19 lb. Listed for a 10mm intermediate shaft. Verified against the Surron Light Bee X, Talaria Sting R, Talaria Sting MX3, Talaria Sting MX4 and E-Ride Pro SS. Order two if you are replacing both sides, and set both to the same mark so the wheel stays square.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Black","offer_id":54486752559414,"sku":"DB-AB-AL-B","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":54486752592182,"sku":"DB-AB-AL-BL","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":54486752624950,"sku":"DB-AB-AL-R","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":54486752657718,"sku":"DB-AB-AL-S","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Gold","offer_id":54486752690486,"sku":"DB-AB-AL-G","price":46.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/db-DirtyBike-Surron-LBX-Talaria-Sting-Aluminum-Axle-Blocks-Blue.jpg?v=1788105041"},{"product_id":"dirtybike-aluminum-rear-sprocket","title":"DirtyBike Aluminum Rear Sprocket","description":"\u003cp\u003eFaster acceleration, better hill climbing, and longer run time with only a small reduction in top speed.\u003c\/p\u003e\u003cp\u003eThese sprockets require a longer 420 chain. You can add a few links to your existing chain but it is always recommended to install a new chain when new sprockets are installed. The length of chain needed depends on what size sprocket you are using.\u003c\/p\u003e\u003cp\u003eKeep sprockets aligned for minimum wear and greater efficiency with the DirtyBike Laser Chain Alignment Tool.\u003c\/p\u003e\u003cp\u003eFits the Surron Light Bee X, Talaria Sting R, Talaria Sting MX3, Talaria Sting MX4, E-Ride Pro SS, Rawrr Mantis.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Black 60T","offer_id":54486752723254,"sku":null,"price":49.0,"currency_code":"USD","in_stock":true},{"title":"Red 60T","offer_id":54486752756022,"sku":null,"price":49.0,"currency_code":"USD","in_stock":true},{"title":"Raw 58T","offer_id":54486752788790,"sku":null,"price":48.0,"currency_code":"USD","in_stock":true},{"title":"Raw 60T","offer_id":54486752821558,"sku":null,"price":49.0,"currency_code":"USD","in_stock":true},{"title":"Red 58T","offer_id":54486752854326,"sku":null,"price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/Surron-LBX-Talaria-db-Aluminum-RearSprocket-BLACK.jpg?v=1788105041"},{"product_id":"dirtybike-bearing-kit","title":"DirtyBike Bearing Kit","description":"\u003cp\u003eIn the unfortunate event that you have an output shaft failure, it is highly recommended to replace all of your gearbox bearings and seals. That is the only way to ensure optimum performance. If there is any damage to the bearings and you don't replace them, your transmission will make a lot of noise when put back into service.\u003c\/p\u003e\u003cp\u003eFits Talaria Sting MX3 and MX4. Does not fit Talaria Sting MX5!\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e6 internal bearings\u003c\/li\u003e\n\u003cli\u003e1 double lip input shaft seal\u003c\/li\u003e\n\u003cli\u003e1 double lip output shaft seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFits the Talaria Sting R, Talaria Sting MX3, Talaria Sting MX4.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Default Title","offer_id":54486752887094,"sku":"TS-GBRK-ZY","price":58.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/db-DirtyBike-Gearbox-Rebuild-Bearing-Kit-Talaria-Sting-MX3-MX4-01_9dee0fdd-95ee-4b99-a8f8-62c49f5e47b3.jpg?v=1788105044"},{"product_id":"dirtybike-bearing-kit-10mm-intermediate-shaft","title":"DirtyBike Bearing Kit 10mm Intermediate Shaft","description":"\u003cp\u003eWorn out intermediate shaft (jackshaft) bearings can quickly turn into excessive play, rough operation, and a more involved repair. Replace loose, noisy, or gritty bearings before they fail with a DirtyBike off-road sealed bearing kit.\u003c\/p\u003e\u003cp\u003eThis complete kit includes four precision deep-groove, rubber-sealed “Black Stripe” bearings and two double-lip seals for a full intermediate shaft bearing refresh. DirtyBike’s exclusive Black Stripe bearings are a substantial upgrade over stock, using high-quality GCr15 bearing steel designed to handle demanding off-road loads, high-speed operation, and the abuse of hard riding.\u003c\/p\u003e\u003cp\u003eRubber seals help keep dirt, water, and debris out of the bearings, while the included double-lip seals add another layer of protection where it matters most.\u003c\/p\u003e\u003cp\u003eKeep your drivetrain running smooth and avoid being sidelined by worn intermediate shaft bearings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e4 DirtyBike Black Stripe precision deep-groove rubber-sealed bearings\u003c\/li\u003e\n\u003cli\u003e2 double-lip seals\u003c\/li\u003e\n\u003cli\u003eSurron Light Bee LBX\u003c\/li\u003e\n\u003cli\u003eE Ride Pro SS\u003c\/li\u003e\n\u003cli\u003e2025 and older E Ride Pro 2.0\u003c\/li\u003e\n\u003cli\u003eTalaria X3 \/ XXX\u003c\/li\u003e\n\u003cli\u003eE Ride Pro SS 3.0\u003c\/li\u003e\n\u003cli\u003eE Ride Pro SR\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFits the Surron Light Bee X, Talaria XXX, E-Ride Pro SS.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Default Title","offer_id":54486752919862,"sku":"LB-ISBK-ZY","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/Surron-LightBee-db-intermediate-bearings.jpg?v=1788105045"},{"product_id":"dirtybike-bearing-kit-front-wheel","title":"DirtyBike Bearing Kit Front Wheel","description":"\u003cp\u003eLoose, gritty, or crunchy front wheel bearings? Don’t wait until they fail on the trail. The DirtyBike Front Wheel Bearing Kit is a direct replacement for worn front wheel bearings on Sur-Ron Light Bee, Talaria Sting, E Ride Pro, and Rawrr Mantis X bikes.\u003c\/p\u003e\u003cp\u003eThis kit includes two precision deep-groove rubber-sealed bearings and two Buna axle spacer O-rings. Torn or missing spacer O-rings are a common reason water, dirt, and grit make their way into the front wheel hub, shortening bearing life and creating that loose or gritty feel at the axle.\u003c\/p\u003e\u003cp\u003eBuilt for riders who actually ride, this kit helps restore smooth front wheel rotation, proper axle support, and long-lasting reliability.\u003c\/p\u003e\u003cp\u003eIf your front wheel bearings feel rough, loose, or gritty, the bearings may not be the only problem. The axle spacer O-rings help seal the hub area and keep contaminants out. When they are torn, flattened, or missing, dirt and water can get past the spacer and into the bearings.\u003c\/p\u003e\u003cp\u003eReplacing the bearings and O-rings together gives your front wheel the best chance at staying smooth, tight, and reliable.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDirect replacement front wheel bearing kit\u003c\/li\u003e\n\u003cli\u003eIncludes 2 precision deep-groove rubber-sealed bearings\u003c\/li\u003e\n\u003cli\u003eIncludes 2 Buna axle spacer O-rings\u003c\/li\u003e\n\u003cli\u003eHelps fix loose, gritty, or worn front wheel bearings\u003c\/li\u003e\n\u003cli\u003eReplaces damaged or missing axle spacer O-rings\u003c\/li\u003e\n\u003cli\u003eSealed bearings help protect against dirt, water, and trail debris\u003c\/li\u003e\n\u003cli\u003eGreat maintenance item for off-road and race bikes\u003c\/li\u003e\n\u003cli\u003eSur-Ron Light Bee \/ LBX\u003c\/li\u003e\n\u003cli\u003eTalaria Sting and XXX\u003c\/li\u003e\n\u003cli\u003eE Ride Pro\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFits the Surron Light Bee X, Talaria Sting R, Talaria Sting MX3, Talaria Sting MX4, E-Ride Pro SS, Rawrr Mantis.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Default Title","offer_id":54486752952630,"sku":"LB-FWBK-ZY","price":16.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/Surron-LightBee-db-front-wheel-bearings_01adbb9d-b4d8-4431-8490-944c10be80d7.jpg?v=1788105045"},{"product_id":"dirtybike-bearing-kit-rear-wheel","title":"DirtyBike Bearing Kit Rear Wheel","description":"\u003cp\u003eRestore smooth wheel movement and dependable performance with the DirtyBike Rear Wheel Bearing \u0026amp; Seal Kit. Designed as a direct replacement for the stock rear wheel bearings and seals, this precision-fit kit replaces worn, noisy, loose, or gritty factory components without requiring modifications.\u003c\/p\u003e\u003cp\u003eEach kit includes high-quality deep-groove sealed bearings built to handle the dirt, impact, and demanding conditions of off-road riding. Double-lip seals provide an additional barrier against water, mud, dust, and debris, helping protect the bearings and extend service life.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTwo precision deep-groove sealed bearings\u003c\/li\u003e\n\u003cli\u003eTwo double-lip wheel seals\u003c\/li\u003e\n\u003cli\u003eSur-Ron Light Bee\u003c\/li\u003e\n\u003cli\u003eTalaria Sting MX3\u003c\/li\u003e\n\u003cli\u003eTalaria Sting MX4\u003c\/li\u003e\n\u003cli\u003eTalaria XXX\u003c\/li\u003e\n\u003cli\u003eE Ride Pro SS\u003c\/li\u003e\n\u003cli\u003eE Ride Pro 2.0\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFits the Surron Light Bee X, Talaria Sting R, Talaria Sting MX3, Talaria Sting MX4, E-Ride Pro SS.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Default Title","offer_id":54486752985398,"sku":"LB-RWBK","price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/Surron-LightBee-db-rear-wheel-bearings_6125cc39-a5fb-477e-9f41-4cfa7c3f50d9.jpg?v=1788105048"},{"product_id":"dirtybike-bonnell-805-bearing-kit-front-wheel","title":"DirtyBike Bonnell 805 Bearing Kit Front Wheel","description":"\u003cp\u003eThe front wheel bearing kit for the Bonnell 805. Front wheel bearings give themselves away as a rumble that changes with speed but not with drive, or as play you can feel at the rim when the wheel is off the ground and the axle is torqued.\u003c\/p\u003e\u003cp\u003eThe kit contains two precision deep groove sealed bearings and two double lip seals, and is sold as a kit at 0.25 lb shipping weight. It is a front wheel kit; the rear wheel is a separate part number with a different bearing set. The Bonnell 805 is not a platform stocked here, so this listing carries no verified fitment tag. Measure your bearing seats before ordering.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Default Title","offer_id":54486753018166,"sku":null,"price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/Rawrr-Mantis-rear-wheel-bearing-kit-02_bf68c734-47a3-44dd-94ee-6b41a6e14483.jpg?v=1788105049"},{"product_id":"dirtybike-bonnell-805-bearing-kit-intermediate-shaft","title":"DirtyBike Bonnell 805 Bearing Kit Intermediate Shaft","description":"\u003cp\u003eThe intermediate jack shaft bearing kit for the Bonnell 805, for replacing shaft bearings that have gone loose and gritty. A mid shaft bearing carries the whole drive load between motor and rear sprocket, so once it develops play the shaft starts to wander and the chain alignment goes with it.\u003c\/p\u003e\u003cp\u003eThe kit contains four precision deep groove double sealed bearings and two double lip seals, sold as a kit at 0.31 lb shipping weight. The seals are rubber and rated for off-road use, which is what keeps water out of a bearing that sits low on the bike. The Bonnell 805 is not a platform stocked here, so this listing carries no verified fitment tag.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Default Title","offer_id":54486753050934,"sku":null,"price":43.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/EridePro-3.0-SR-DirtyBike-BearingKit-Intermediate-Shaft_5bb85980-59ba-448f-8c47-5575a3d162ce.jpg?v=1788105049"},{"product_id":"dirtybike-bonnell-805-bearing-kit-rear-wheel","title":"DirtyBike Bonnell 805 Bearing Kit Rear Wheel","description":"\u003cp\u003eThe rear wheel bearing kit for the Bonnell 805. Rear bearings take chain tension on top of the wheel load, so they usually go before the fronts do, and a rear wheel that will not stay in line under power is often a bearing rather than an axle problem.\u003c\/p\u003e\u003cp\u003eThe kit contains two precision deep groove sealed bearings and two double lip seals, sold as a kit at 0.25 lb shipping weight. It is a rear wheel kit; the front wheel is a separate part number. The Bonnell 805 is not a platform stocked here, so this listing carries no verified fitment tag. Drive new bearings in on the outer race only.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Default Title","offer_id":54486753083702,"sku":null,"price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/Rawrr-Mantis-rear-wheel-bearing-kit-02.jpg?v=1788105052"},{"product_id":"dirtybike-bonnell-805-swingarm-bearing-kit","title":"DirtyBike Bonnell 805 Swingarm Bearing Kit","description":"\u003cp\u003eThe swingarm bearing kit for the Bonnell 805, for replacing pivot bearings that have gone loose and gritty. Swingarm play is easy to miss because it does not make noise: grab the back wheel and push it side to side with the bike on a stand, and a worn pivot will move when the frame does not.\u003c\/p\u003e\u003cp\u003eThe kit contains four precision deep groove sealed bearings, rubber sealed for off-road use, sold as a kit at 0.31 lb shipping weight. DirtyBike lists a separate swingarm bearing removal tool that makes getting the old set out much easier. The Bonnell 805 is not a platform stocked here, so this listing carries no verified fitment tag.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Default Title","offer_id":54486753116470,"sku":null,"price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/Surron-UltraBee-DirtyBike-BearingKit-Swingarm_4d1d5f18-6f33-47e8-9e41-4b2620649dab.jpg?v=1788105052"},{"product_id":"dirtybike-caliper-spacer-adaptor-kit-for-220mm-front-brake-rotor","title":"DirtyBike Caliper Spacer Adaptor Kit for 220mm Front Brake Rotor","description":"\u003cp\u003eA caliper spacer adaptor that moves the front caliper outward so it lines up with a 220mm brake rotor rather than the smaller stock disc. This is the part that makes an oversize front rotor a bolt-on rather than a bracket-fabrication job.\u003c\/p\u003e\u003cp\u003eThe kit contains two long hardened steel bolts and two anodized aluminum spacers, and is sold as a kit at 0.05 lb shipping weight. Verified against the Surron Light Bee X, Talaria Sting R, Talaria Sting MX3, Talaria Sting MX4 and E-Ride Pro SS. Check pad-to-rotor alignment across the full sweep before riding, since a caliper sitting proud on one side will drag.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Default Title","offer_id":54486753149238,"sku":"LB-BRA-10","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/Surron-LightBee-db-caliper-spacer-kit_c085f750-feda-42da-a478-242b3838e29c.jpg?v=1788105053"},{"product_id":"dirtybike-cnc-aluminum-foot-pegs","title":"DirtyBike CNC Aluminum Foot Pegs","description":"\u003cp\u003eCNC machined 7075 series aluminum foot pegs with an aggressive bite for standing and off-road riding. The stainless steel inserts are replaceable and removable, which is the detail that matters on a peg: teeth wear round after a season, and here you renew the inserts rather than the whole peg.\u003c\/p\u003e\u003cp\u003eThey work with the stock peg springs, so no extra hardware is needed. Available in black, blue, red, green and blaze orange, sold as a single item, shipping weight 0.69 lb. Verified against the Surron Light Bee X, Talaria Sting MX3, Talaria XXX and E-Ride Pro SS. Order two if you are doing both sides.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Black","offer_id":54486753182006,"sku":"TS-FP-CNCAL-B","price":89.0,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":54486753214774,"sku":"TS-FP-CNCAL-BL","price":89.0,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":54486753247542,"sku":"TS-FP-CNCAL-R","price":89.0,"currency_code":"USD","in_stock":true},{"title":"Green","offer_id":54486753280310,"sku":"TS-FP-CNCAL-G","price":89.0,"currency_code":"USD","in_stock":true},{"title":"Blaze Orange","offer_id":54486753313078,"sku":null,"price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/Talaria-Sting-db-CNC-aluminum-footpeg-blue.jpg?v=1788105057"},{"product_id":"dirtybike-e-ride-pro-2-0-3-0-420-sealed-x-ring-primary-belt-to-chain-conversion","title":"DirtyBike E-Ride Pro 2.0\/3.0 420 Sealed X-Ring Primary Belt to Chain Conversion Kit","description":"\u003cp\u003eDirtyBike primary chain drive system with sealed X-ring chain minimizes drag and reduces chain noise, providing a longer lasting drive system.\u003c\/p\u003e\u003cp\u003eThis is a much stronger chain and is considered a necessary upgrade for off-road riders. If you ride in dusty, sandy or muddy conditions you will eventually have primary belt slippage which will cause failure of the stock primary belt. Upgrading to a chain kit means you are less likely to be stranded in the middle of nowhere.\u003c\/p\u003e\u003cp\u003e420 Sealed X-ring chain with master link can be replaced easily without removing the swing arm.\u003c\/p\u003e\u003cp\u003eNote: Some of the E Ride motors have shallow woodruff keyways. It may be necessary to remove 5.mm from one side of the woodruff key to allow it to fit properly.\u003c\/p\u003e\u003cp\u003eOn road and light off road with stock power\u003c\/p\u003e\u003cp\u003eFits the E-Ride Pro SS. DirtyBike also lists it for the E-Ride Pro SR \/ 3.0, which we do not stock.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Default Title","offer_id":54486753345846,"sku":"EP-PCD-420-GS-XR-G","price":87.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/E_Ride_Pro-PrimaryChainDrive-420-Xring.jpg?v=1788105057"},{"product_id":"dirtybike-e-ride-pro-2-0-3-0-sr-219-primary-belt-to-chain-conversion-kit","title":"DirtyBike E-Ride Pro 2.0\/3.0\/SR 219 Primary Belt to Chain Conversion Kit","description":"\u003cp\u003eRide long enough and eventually you will have primary belt slippage which will inevitably lead to belt failure. Don't be the guy that holds up your whole group because you just snapped a belt and have to be towed back. Upgrading to a DirtyBike primary chain drive system ensures you will never have belt issues again. Whether you are on a huge ride out or trail riding with friends, DirtyBike primary chain drive kits give you the peace of mind you need to ride wherever you want with confidence.\u003c\/p\u003e\u003cp\u003eThe RK 219 KRO sealed chain makes this kit super quiet and long lasting with less maintenance. RK has won over 50 World Kart championships with this chain.\u003c\/p\u003e\u003cp\u003eDirtyBike's 219 RK primary chain drive system minimizes drag and reduces chain noise, providing a longer lasting drive system.\u003c\/p\u003e\u003cp\u003eProper lubrication and adjustment will ensure your chain kit will last years and remain almost as quiet as the stock belt system.\u003c\/p\u003e\u003cp\u003eDirtyBike Belt to Chain Conversion Kit features:\u003c\/p\u003e\u003cp\u003eNote: Some of the E Ride motors have shallow woodruff keyways. It may be necessary to remove 5.mm from one side of the woodruff key to allow it to fit properly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRK Sealed O-Ring racing chain\u003c\/li\u003e\n\u003cli\u003eHardened steel sprockets for reduced wear\u003c\/li\u003e\n\u003cli\u003eKit is 20% lighter and more efficient than the stock belt system\u003c\/li\u003e\n\u003cli\u003eBetter Acceleration\u003c\/li\u003e\n\u003cli\u003eLonger Run Time\u003c\/li\u003e\n\u003cli\u003eMaintains Stock Gear Ratio\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFits the E-Ride Pro SS. DirtyBike also lists it for the E-Ride Pro SR \/ 3.0, which we do not stock.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Blue","offer_id":54486753378614,"sku":"EP-2.0-PCD-GS-219RK-BL","price":112.0,"currency_code":"USD","in_stock":true},{"title":"Orange","offer_id":54486753411382,"sku":"EP-2.0-PCD-GS-219RK-OR","price":112.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/ERidePro-Primary-Chain-Drive-219-RK-Orange.jpg?v=1788105058"},{"product_id":"dirtybike-e-ride-pro-2-0-3-0-sr-219-rk-non-sealed-chain","title":"DirtyBike E-Ride Pro 2.0\/3.0\/SR 219 RK Non-Sealed Chain","description":"\u003cp\u003eRide long enough and eventually you will have primary belt slippage which will inevitably lead to belt failure. Don't be the guy that holds up your whole group because you just snapped a belt and have to be towed back. Upgrading to a DirtyBike primary chain drive system ensures you will never have belt issues again. Whether you are on a huge ride out or trail riding with friends, DirtyBike primary chain drive kits give you the peace of mind you need to ride wherever you want with confidence.\u003c\/p\u003e\u003cp\u003eThe RK 219 non-sealed chain has the least amount of drag giving you the best performance. RK has won over 50 World Kart championships with this chain.\u003c\/p\u003e\u003cp\u003eDirtyBike's 219 RK primary chain drive system minimizes drag but is a little louder than the RK sealed chains.\u003c\/p\u003e\u003cp\u003eProper lubrication and adjustment will ensure your chain kit will last years and remain almost as quiet as the stock belt system.\u003c\/p\u003e\u003cp\u003eDirtyBike Belt to Chain Conversion Kit features:\u003c\/p\u003e\u003cp\u003eOn road and light off road with stock power\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRK Sealed O-Ring racing chain\u003c\/li\u003e\n\u003cli\u003eHardened steel sprockets for reduced wear\u003c\/li\u003e\n\u003cli\u003eKit is 20% lighter and more efficient than the stock belt system\u003c\/li\u003e\n\u003cli\u003eBetter Acceleration\u003c\/li\u003e\n\u003cli\u003eLonger Run Time\u003c\/li\u003e\n\u003cli\u003eMaintains Stock Gear Ratio\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFits the E-Ride Pro SS. DirtyBike also lists it for the E-Ride Pro SR \/ 3.0, which we do not stock.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Default Title","offer_id":54486753444150,"sku":"EP-2.0-PCD-219RK-NOR","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/ERidePro-Primary-Chain-RK-non-sealed.jpg?v=1788105061"},{"product_id":"dirtybike-e-ride-pro-3-0-sr-bearing-kit-12mm-intermediate-shaft","title":"DirtyBike E-Ride Pro 3.0\/SR Bearing Kit 12mm Intermediate Shaft","description":"\u003cp\u003eWorn intermediate shaft, or jackshaft, bearings can lead to excess play, drivetrain noise, rough operation, and premature wear. Refresh your intermediate shaft assembly with a DirtyBike bearing and seal kit made specifically for the E Ride Pro 3.0 and E Ride Pro SR.\u003c\/p\u003e\u003cp\u003eThis complete kit includes four precision deep-groove sealed bearings and two double-lip seals for a full intermediate shaft rebuild. The sealed bearings help retain lubrication while keeping out dirt, mud, water, and debris, and the double-lip seals provide added protection for demanding off-road conditions.\u003c\/p\u003e\u003cp\u003eBuilt for riders who put their bikes through hard trail riding, racing, and performance upgrades, this kit helps restore smooth, reliable power transfer through the drivetrain and protect surrounding components from avoidable wear.\u003c\/p\u003e\u003cp\u003eImportant Fitment Note: This kit fits only E Ride Pro SR, 3.0 and 2026 and newer 2.0. models. It does not fit E Ride Pro SS, Older 2.0, Surron Light Bee, Talaria XXX, or any other bike model.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e4 precision deep-groove sealed bearings\u003c\/li\u003e\n\u003cli\u003e2 double-lip seals\u003c\/li\u003e\n\u003cli\u003eE Ride Pro SS 3.0\u003c\/li\u003e\n\u003cli\u003eE Ride Pro SR\u003c\/li\u003e\n\u003cli\u003e2025 and newer 2.0\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMade for the E-Ride Pro SR \/ 3.0 - a platform we do not currently stock bikes for.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Default Title","offer_id":54486753509686,"sku":null,"price":32.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/db-DirtyBike-ERidePro-Intermediate-Bearing-Kit-3-SR-01.jpg?v=1788105062"},{"product_id":"dirtybike-e-ride-pro-bearing-kit-suspension-linkage","title":"DirtyBike E-Ride Pro Bearing Kit Suspension Linkage","description":"\u003cp\u003eThe suspension linkage bearing kit for the E-Ride Pro SS, containing everything needed to rebuild the center link, the piece riders call the dog bone. Loose link bearings show up as a rear end that feels vague over small hits and clunks on direction changes.\u003c\/p\u003e\u003cp\u003eIt is a precision needle bearing kit and includes all the bearings and seals for the rebuild, sold as a kit at 0.31 lb shipping weight. Verified against the E-Ride Pro SS. Grease the new bearings on assembly rather than running them dry, and check the link bolts for scoring while it is apart, since a bearing that has been run loose will have marked the shaft it rides on.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Default Title","offer_id":54486753542454,"sku":null,"price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/E-Ride-Pro-suspension-link-bearing-kit.jpg?v=1788105063"},{"product_id":"dirtybike-e-ride-pro-sr-3-0-bearing-kit-swingarm-12mm-shaft","title":"DirtyBike E-Ride Pro SR\/3.0 Bearing Kit Swingarm 12mm Shaft","description":"\u003cp\u003eDirtyBikes exclusive \"Black Stripe\" bearings are a big step up over stock. High-quality Gcr15 steel can withstand much heavier loads and higher speeds, allowing it to last much longer than the stock bearings.\u003c\/p\u003e\u003cp\u003eNOTE: Swingarm bearings cannot be pressed through the swingarm. The inside bearings must be removed from the inside and the outside bearings must be removed from the outside.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eE Ride Pro SR\u003c\/li\u003e\n\u003cli\u003eE Ride Pro 3.0\u003c\/li\u003e\n\u003cli\u003eE Ride Pro 2.0 2026 and newer\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMade for the E-Ride Pro SR \/ 3.0 - a platform we do not currently stock bikes for.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Default Title","offer_id":54486753771830,"sku":"EP-SR-SABK-ZY","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/db-DirtyBike-ERidePro-Swingarm-Bearing-Kit-3-SR.jpg?v=1788105065"},{"product_id":"dirtybike-e-ride-pro-sr-420-sealed-x-ring-primary-belt-to-chain-conversion-kit","title":"DirtyBike E-Ride Pro SR 420 Sealed X-Ring Primary Belt to Chain Conversion Kit","description":"\u003cp\u003eDirtyBike primary chain drive system with sealed X-ring chain minimizes drag and reduces chain noise, providing a longer lasting drive system.\u003c\/p\u003e\u003cp\u003eWarning! Some 3.0 and SR models can have an interference issue with this kit! As the primary chain is adjusted the motor moves rearward. If moved back far enough the motor can interfere with the final drive chain. It may be necessary to increase this clearance by grinding one or two of the motor fins where the contact is happening. If you are not OK with doing this, please do not purchase this kit.\u003c\/p\u003e\u003cp\u003eThis is a much stronger chain and is considered a necessary upgrade for off-road riders. If you ride in dusty, sandy or muddy conditions you will eventually have primary belt slippage which will cause failure of the stock primary belt. Upgrading to a chain kit means you are less likely to be stranded in the middle of nowhere.\u003c\/p\u003e\u003cp\u003e420 Sealed X-ring chain with master link can be replaced easily without removing the swing arm.\u003c\/p\u003e\u003cp\u003eThis kit comes with DirtyBike exclusive 1mm aluminum alignment shim allowing you to adjust the sprocket alignment for a quieter, longer lasting drive system.\u003c\/p\u003e\u003cp\u003eOn road and light off road with stock power\u003c\/p\u003e\u003cp\u003eMade for the E-Ride Pro SR \/ 3.0 - a platform we do not currently stock bikes for.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Default Title","offer_id":54486753804598,"sku":"EP-SR-PCD-420-GS-XR-G","price":87.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/E_Ride_Pro-PrimaryChainDrive-420-Xring_234b9991-c82b-4fe8-bb10-369e9f473058.jpg?v=1788105066"},{"product_id":"dirtybike-e-ride-pro-sr-primary-belt-to-chain-conversion-rk-420-mxu","title":"DirtyBike E-Ride Pro SR Primary Belt to Chain Conversion, RK 420 MXU","description":"\u003cp\u003eWarning! Some 3.0 and SR models can have an interference issue with this kit! As the primary chain is adjusted the motor moves rearward. If moved back far enough, the motor can interfere with the final drive chain. It may be necessary to increase this clearance by grinding one or two of the motor fins where the contact is happening. If you are not OK with doing this, please do not purchase this kit.\u003c\/p\u003e\u003cp\u003eIf you ride in dusty, sandy or muddy conditions you may have primary belt slippage which will eventually fail the stock primary belt, possibly leaving you stranded in the middle of nowhere. Don’t let this happen! Install a DirtyBike primary chain drive system. With the world famous RK GB4MXU chain, this is a necessary upgrade for the serious off-road rider and maintains stock gear ratio.\u003c\/p\u003e\u003cp\u003eRK GB420MXU Sealed chain is one of the strongest and quietest 420 chains available.\u003c\/p\u003e\u003cp\u003eMaster link makes for easier installation and the chain can be replaced easily without removing the swing arm.\u003c\/p\u003e\u003cp\u003eNote: Some of the E Ride Pro motors have shallow woodruff keyways. It may be necessary to remove 5.mm from one side of the woodruff key to allow it to fit properly.\u003c\/p\u003e\u003cp\u003eOn road and light off road with stock power\u003c\/p\u003e\u003cp\u003eUniversal fitment - check the dimensions against your bike before ordering.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Default Title","offer_id":54486753837366,"sku":null,"price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/Surron-LBX-db-420RK-gold-replacement-chain_16dd5519-f3f1-4c23-9e2c-f6ff5a6dc677.jpg?v=1788105067"},{"product_id":"dirtybike-e-ride-pro-ss-2-0-3-0-420-rk-mxu-primary-belt-to-chain-conversion","title":"DirtyBike E-Ride Pro SS 2.0 3.0 420 RK MXU Primary Belt to Chain Conversion","description":"\u003cp\u003eIf you ride in dusty, sandy or muddy conditions you may have primary belt slippage which will eventually fail the stock primary belt, possibly leaving you stranded in the middle of nowhere. Don’t let this happen! Install a DirtyBike primary chain drive system. With the world famous RK GB4MXU chain, this is a necessary upgrade for the serious off-road rider and maintains stock gear ratio.\u003c\/p\u003e\u003cp\u003eRK GB420MXU Sealed chain is one of the strongest and quietest 420 chains available.\u003c\/p\u003e\u003cp\u003eMaster link makes for easier installation and the chain can be replaced easily without removing the swing arm.\u003c\/p\u003e\u003cp\u003eNote: Some of the E Ride Pro motors have shallow woodruff keyways. It may be necessary to remove 5.mm from one side of the woodruff key to allow it to fit properly.\u003c\/p\u003e\u003cp\u003eOn road and light off road with stock power\u003c\/p\u003e\u003cp\u003eFits the E-Ride Pro SS.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Default Title","offer_id":54486753902902,"sku":"EP-2.0\/3.0-PCD-GS-420-RK-MXU-G","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/Surron-LBX-db-420RK-gold-replacement-chain_59ce0639-c6d9-4bef-847a-a2433d569a06.jpg?v=1788105070"},{"product_id":"dirtybike-e-ride-pro-ss-3-0-sr-swingarm-pivot-shaft-nut-12mm","title":"DirtyBike E-Ride Pro SS 3.0 \u0026 SR Swingarm Pivot Shaft Nut, 12mm","description":"\u003cp\u003eThis zinc-plated, high-strength Class 10 steel nylon lock nut is a practical upgrade when servicing your swingarm, replacing jackshaft bearings, or converting from belt drive to chain drive.\u003c\/p\u003e\u003cp\u003eThe stock castle nut requires a special removal tool, which can make routine maintenance more difficult than it needs to be. This 12mm nyloc nut replaces the stock castle nut and allows removal and installation with a standard 19mm socket.\u003c\/p\u003e\u003cp\u003eBuilt from durable zinc-plated steel for corrosion resistance and long service life, this nut is a smart replacement to have on hand any time you are working on the swingarm pivot shaft assembly.\u003c\/p\u003e\u003cp\u003eImportant Fitment Note: This nut is for the E Ride Pro SS 3.0 and E Ride Pro SR only. It will not fit the E Ride Pro SS 2.0 or earlier E Ride Pro SS models.\u003c\/p\u003e\u003cp\u003eFits the E-Ride Pro SS. DirtyBike also lists it for the E-Ride Pro SR \/ 3.0, which we do not stock.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Default Title","offer_id":54486753935670,"sku":null,"price":6.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/db-DirtyBike-ERidePro-Swingarm-Pivot-Shaft-Nut-02.jpg?v=1788105070"},{"product_id":"dirtybike-e-ride-pro-surron-lbx-aluminum-cnc-motor-sprocket-cover","title":"DirtyBike E-Ride Pro Surron LBX Aluminum CNC Motor Sprocket Cover","description":"\u003cp\u003eUpgrade your drivetrain setup with the DirtyBike CNC Aluminum Motor Sprocket Cover—built for riders who demand durability, function, and clean factory-level fit. If you're running an E Ride Pro, this cover replaces the weak OEM plastic unit with a precision-machined aluminum solution that’s made to take abuse. Whether you're racing, tuning, or just riding hard, this cover keeps things protected while making maintenance easier. The smart open-access design allows quick chain adjustments and effortless lubrication without removing the cover, minimizing down-time. Machined from high-strength CNC billet 60-series aluminum and finished with a hard anodized coating, it’s built to resist impacts, corrosion, and wear while adding a sharp, race-ready look to your build. Features: CNC machined from 60-series billet aluminum Hard anodized finish (available in multiple colors) Stronger and more durable than stock plastic cover Open design for easy chain adjustment and lubrication Includes stainless steel mounting hardware Direct fit for E Ride Pro models Designed to complement our chain drive kits, a performance upgrade we recommend for durability and reliability in off-road conditions..\u003c\/p\u003e\u003cp\u003eFits the Surron Light Bee X, E-Ride Pro SS.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Black","offer_id":54486754263350,"sku":null,"price":39.0,"currency_code":"USD","in_stock":true},{"title":"Gold","offer_id":54486754296118,"sku":null,"price":39.0,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":54486754328886,"sku":null,"price":39.0,"currency_code":"USD","in_stock":true},{"title":"Purple","offer_id":54486754361654,"sku":null,"price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/db-DirtyBike-ERidePro-CNC-Motor-Sprocket-Cover-Colors_322ff510-11c3-4b57-9528-e0c79b592229.jpg?v=1788105071"},{"product_id":"dirtybike-front-wheel-spacer-set","title":"DirtyBike Front Wheel Spacer Set","description":"\u003cp\u003eAn aluminum front wheel spacer set that sits between the front wheel and the fork legs. The spacers set the hub centered in the fork, and the O-rings keep grit out of the gap where the spacer meets the seal, which is where a dry spacer starts chewing into the hub.\u003c\/p\u003e\u003cp\u003eHard anodized in black, blue and gold, sold as a kit at 0.06 lb shipping weight. DirtyBike notes the set suits most bikes using a mountain bike front hub. Verified against the Surron Light Bee X, Talaria Sting R, Talaria Sting MX3, Talaria Sting MX4 and E-Ride Pro SS. Measure your existing spacers before ordering if the fork has been changed.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Black","offer_id":54486754394422,"sku":"DB-FWSS-A-BK","price":14.0,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":54486754427190,"sku":"DB-FWSS-A-BL","price":14.0,"currency_code":"USD","in_stock":true},{"title":"Gold","offer_id":54486754459958,"sku":"DB-FWSS-A-GL","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/Surron-Talaria-ERidePro-Front-Wheel-Spacer-Colors_5ade6fe6-63f8-4d58-89f3-671b8bb34208.jpg?v=1788105076"},{"product_id":"dirtybike-handlebar-riser","title":"DirtyBike Handlebar Riser","description":"\u003cp\u003eLooking for a better riding position on your Light Bee, Talaria, Rawrr Mantis X or E Ride Pro? This Solid mount 6061 T6 aluminum handlebar riser raises your handlebars 50mm for a more comfortable riding position.\u003c\/p\u003e\u003cp\u003eMounts to your triple clamp instead of the less stable stock tube mount for a more secure connection, especially when riding aggressively.\u003c\/p\u003e\u003cp\u003eAnodized aluminum for durability and great looks with stainless steel hardware included. Fits Light Bee, Talaria Sting MX3, MX4, MX5 and XXX, E Ride Pro, and Rawrr Mantis X.\u003c\/p\u003e\u003cp\u003eFits the Surron Light Bee X, Talaria Sting R, Talaria Sting MX3, Talaria Sting MX4, E-Ride Pro SS, Rawrr Mantis.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Black","offer_id":54486754492726,"sku":"db-SMHR-A-BK","price":99.0,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":54486754525494,"sku":"db-SMHR-A-BL","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/Solid-Mount-Handlebar-Riser-Blue_64cce1fd-f8d6-41da-81e2-da1bd08e4038.webp?v=1788105076"},{"product_id":"dirtybike-heavy-duty-rim-lock","title":"DirtyBike Heavy Duty Rim Lock","description":"\u003cp\u003eA must for aggressive off-road riding, this off road rim lock from DirtyBike allows you to lower your tire pressure to instantly increase traction while preventing your tire from slipping on the rim and damaging your inner tube.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits 1.4 – 1.6\" rims\u003c\/li\u003e\n\u003cli\u003eHeavy duty die cast aluminum body\u003c\/li\u003e\n\u003cli\u003eOver molded rubber to protect against abrasion of inner tube\u003c\/li\u003e\n\u003cli\u003eRibbed alloy contact surface locks tire securely to rim\u003c\/li\u003e\n\u003cli\u003eWeight 2.3oz\u003c\/li\u003e\n\u003cli\u003eRecommended tightening torque on nut is 14 foot-pound\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFits the Surron Light Bee X, Talaria Sting R, Talaria Sting MX3, Talaria Sting MX4, E-Ride Pro SS, Rawrr Mantis.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Default Title","offer_id":54486754558262,"sku":"DB-HDRL-1.6-O","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/Surron-LightBee-db-rimlock-heavy-duty-02.jpg?v=1788105077"},{"product_id":"dirtybike-kill-switch","title":"DirtyBike Kill Switch","description":"\u003cp\u003eNew AMA Rules For Electric Motorbikes Require A Safety Lanyard Attached To The Rider That Kills Power When Rider Is Separated From Their Bike\u003c\/p\u003e\u003cp\u003eKill Switch That Works With Stock Key Switch: Unplug your original key switch and plug it into the mating connector on the Safety Kill Switch, then plug the remaining Safety Kill Switch connector to the original key connector from the bike.\u003c\/p\u003e\u003cp\u003eKill Switch That Replaces Stock Key Switch:\u003c\/p\u003e\u003cp\u003eUnplug your key switch and plug the new Safety Kill Switch directly into the original key switch connector.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEasy to connect and remove tether key\u003c\/li\u003e\n\u003cli\u003eInstantly kills the power if you are separated from your bik\u003c\/li\u003e\n\u003cli\u003eGreat for recreational riders or juniors\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFits the Surron Light Bee X, Surron Ultra Bee, Talaria Sting R, Talaria Sting MX3, Talaria Sting MX4, E-Ride Pro SS.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Light Bee","offer_id":54486754591030,"sku":"DB-Light-SKS-TUSK-WK","price":39.0,"currency_code":"USD","in_stock":true},{"title":"Light Bee Replaces Key Switch","offer_id":54486754623798,"sku":"DB-Light-SKS-TUSK-RK","price":39.0,"currency_code":"USD","in_stock":true},{"title":"Ultra Bee","offer_id":54486754656566,"sku":"DB-UB-SKS-TUSK-WK","price":39.0,"currency_code":"USD","in_stock":true},{"title":"Ultra Bee Replaces Key Switch","offer_id":54486754689334,"sku":"DB-UB-SKS-TUSK-RK","price":39.0,"currency_code":"USD","in_stock":true},{"title":"Talaria Sting MX3\/MX4","offer_id":54486754722102,"sku":"DB-Light-SKS-TUSK-WK","price":39.0,"currency_code":"USD","in_stock":true},{"title":"Talaria Sting MX3\/MX4 Replaces Key Switch","offer_id":54486754754870,"sku":"DB-Light-SKS-TUSK-RK","price":39.0,"currency_code":"USD","in_stock":true},{"title":"E Ride Pro SS","offer_id":54486754787638,"sku":"DB-Light-SKS-TUSK-WK","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/db-DirtyBike-Kill-Switch-Magnetic-Surron-Talaria-ERidePro-01.jpg?v=1788105082"},{"product_id":"dirtybike-motorcycle-laser-chain-alignment-tool","title":"DirtyBike Motorcycle Laser Chain Alignment Tool","description":"\u003cp\u003eA misaligned chain will rob power, cause premature wear, and can even cause chain derailment.\u003c\/p\u003e\u003cp\u003eWe developed this tool because factory swingarm alignment marks can be inaccurate. Correct chain alignment is crucial for proper operation of your motorcycle.\u003c\/p\u003e\u003cp\u003eThis easy to use tool ensures your bike has the most accurate chain alignment possible for optimal performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProper chain alignment will provide a smoother ride, maximize performance and make the ride smoother.\u003c\/li\u003e\n\u003cli\u003eClamps securely to your rear sprocket and shines a laser to the front sprocket so you can adjust the drive line for precision accuracy.\u003c\/li\u003e\n\u003cli\u003eCan be used on almost any motorcycle with right or left side drive systems.\u003c\/li\u003e\n\u003cli\u003eThe tool comes set up for left hand drive bikes but can be converted easily to right side drive using the included tools.\u003c\/li\u003e\n\u003cli\u003eDesigned to fit snugly into a dense foam storage box to keep it safe and accurate.\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFits the Surron Light Bee X, Surron Ultra Bee, Talaria Sting R, Talaria Sting MX3, Talaria Sting MX4, E-Ride Pro SS.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Default Title","offer_id":54486754820406,"sku":"DB-Align-LZR-Tool","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/db-DirtyBike-laser-chain-alignment-tool-01_7b911257-0cf3-41fb-99ca-82e07264dc68.jpg?v=1788105082"},{"product_id":"dirtybike-oem-single-phase-circuit-breaker","title":"DirtyBike OEM Single Phase Circuit Breaker","description":"\u003cp\u003eThe OEM-spec single phase circuit breaker, a direct replacement rather than an upgrade. It is the part to order when the original has tripped one time too many and will no longer hold, or when it has taken enough water that the contacts have gone high-resistance.\u003c\/p\u003e\u003cp\u003eSold as a single item, shipping weight 0.37 lb. Verified against the Surron Light Bee X, Talaria Sting R, Talaria Sting MX3 and E-Ride Pro SS. If you are running an aftermarket controller that draws more than stock, a breaker with a higher rating is the safer choice; DirtyBike lists a 125A version separately for that job.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Default Title","offer_id":54486754853174,"sku":"LB-23500-YQ2A","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/Surron-LightBee-Single-Phase-Circuit-Breaker.jpg?v=1788105083"},{"product_id":"dirtybike-pre-charge-resistor-for-asi-bac-controllers","title":"DirtyBike Pre-Charge Resistor for ASI BAC Controllers","description":"\u003cp\u003eA pre-charge resistor for ASI and BAC controllers. High power controllers have large capacitors, and connecting a high output battery straight to them dumps an inrush spike through the contacts. Pre-charging brings those capacitors up gently first, and DirtyBike is direct about it: any controller in the field should have this retrofitted.\u003c\/p\u003e\u003cp\u003eIt works with the system circuit breaker in the open position, providing the current limit that keeps the spike off the controller. Two sizes are listed, 30W at 250 Ohm and 20W at 250 Ohm, sold as a single item at 0.19 lb shipping weight. Fitment is universal rather than platform specific, so check your own layout and connector before ordering.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"30W\/250 Ohm","offer_id":54486754885942,"sku":null,"price":5.95,"currency_code":"USD","in_stock":true},{"title":"20W\/250 Ohm","offer_id":54486754918710,"sku":null,"price":5.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/db-DirtyBike-PreCharge-Resistor-ASI-BAC-Controllers-30W_f3d10ab1-d3a0-41fe-ab93-45d3e986a232.jpg?v=1788105088"},{"product_id":"dirtybike-rawrr-mantis-kill-switch","title":"DirtyBike Rawrr Mantis Kill Switch","description":"\u003cp\u003eNew AMA racing rules for electric motorbikes require a safety lanyard attached to the rider that kills power when rider is separated from their bike. Replaces your existing key switch.\u003c\/p\u003e\u003cp\u003eKill Switch That Replaces Stock Key Switch: Unplug your key switch and plug the new Safety Kill Switch directly into the original key switch connector.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEasy to connect and remove tether key\u003c\/li\u003e\n\u003cli\u003eInstantly kills the power if you are separated from your bike\u003c\/li\u003e\n\u003cli\u003eGreat for recreational riders or juniors\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFits the Rawrr Mantis.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Mantis X","offer_id":54486754951478,"sku":"DB-MKS-Mag1","price":39.0,"currency_code":"USD","in_stock":true},{"title":"Mantis","offer_id":54486754984246,"sku":"DB-MKS-MAG1-M","price":39.0,"currency_code":"USD","in_stock":true},{"title":"Mantis Mini","offer_id":54486755017014,"sku":"DB-MKS-MAG1-MM","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/db-DirtyBike-Kill-Switch-Magnetic-Surron-Talaria-ERidePro-01_a95bf599-ab2c-4120-abc0-dad13ae08f99.jpg?v=1788105089"},{"product_id":"dirtybike-rawrr-mantis-x-bearing-kit-rear-wheel","title":"DirtyBike Rawrr Mantis X Bearing Kit Rear Wheel","description":"\u003cp\u003eThe rear wheel bearing kit for the Rawrr Mantis. Rear wheel bearings carry chain tension on top of the weight of the bike, so they wear faster than the fronts, and once they go the wheel will not hold its line under power no matter how the axle is torqued.\u003c\/p\u003e\u003cp\u003eThe kit contains two precision deep groove sealed bearings and two double lip seals, sold as a kit at 0.25 lb shipping weight. Double sealing is what suits it to off-road use, where a single-seal bearing takes water at the first deep puddle. Verified against the Rawrr Mantis. Press new bearings in square and on the outer race only.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Default Title","offer_id":54486755049782,"sku":"RM-RWBK-ZY","price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/Rawrr-Mantis-rear-wheel-bearing-kit-02_70235c68-3f36-4f10-8926-53c7a0405d58.jpg?v=1788105089"},{"product_id":"dirtybike-rawrr-mantis-x-display-relocation-bracket-kit","title":"DirtyBike Rawrr Mantis X Display Relocation Bracket Kit","description":"\u003cp\u003eA bracket kit that relocates the Rawrr Mantis display. From the factory the gauge sits high and forward of the handlebars, which is the first thing to hit the ground in a crash and an expensive part to replace. This kit drops it onto the upper fork clamps where it is protected.\u003c\/p\u003e\u003cp\u003eIt mounts directly to the upper fork clamps and works with any bend of handlebar, so a bar swap does not undo it. Mounting hardware is included, and the brackets are hard anodized in black or silver, sold as a kit at 0.19 lb shipping weight. Verified against the Rawrr Mantis. Check the display cable has slack at full lock after fitting.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Black","offer_id":54486755082550,"sku":"RMX-DRK-A-B","price":35.0,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":54486755115318,"sku":null,"price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/Rawrr-Speedometer-Relocation-Bracket-onbike-02.jpg?v=1788105093"},{"product_id":"dirtybike-rawrr-mantis-x-mantis-mini-1-4-turn-electronic-magura-throttle","title":"DirtyBike Rawrr Mantis X Mantis Mini 1\/4 Turn Electronic Magura Throttle","description":"\u003cp\u003eUpgrade your throttle response with a genuine Magura throttle, calibrated in-house by DirtyBike for the correct voltage output and minimal dead band.\u003c\/p\u003e\u003cp\u003eEach throttle is inspected and adjusted before shipping for smooth, predictable operation. The wiring is securely attached to the housing to help reduce the risk of wires pulling loose during installation or use.\u003c\/p\u003e\u003cp\u003eTo provide enough clearance for the Magura throttle, the start\/stop switch housing must be moved inward approximately 10mm. This minor adjustment is required for proper fitment. See photo below for installation details.\u003c\/p\u003e\u003cp\u003eDirtyBike electronics allow this throttle to work properly with all models, including 2021 and newer controllers. These throttles are all assembled and calibrated in house and are dynamically tested for the proper closed and full throttle voltage. Includes high quality gray or black half waffle off road grips.\u003c\/p\u003e\u003cp\u003eTroubleshooting tips for a non-working throttle\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGenuine Magura throttle\u003c\/li\u003e\n\u003cli\u003eCalibrated in-house by DirtyBike\u003c\/li\u003e\n\u003cli\u003eAdjusted for minimal dead band\u003c\/li\u003e\n\u003cli\u003eSet for proper voltage output\u003c\/li\u003e\n\u003cli\u003eSecurely attached wiring\u003c\/li\u003e\n\u003cli\u003eDirect electrical connection with minor handlebar adjustment required\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFits the Rawrr Mantis.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Black Grips","offer_id":54486755148086,"sku":"RM-ET-M-B","price":119.0,"currency_code":"USD","in_stock":true},{"title":"Grey Grips","offer_id":54486755180854,"sku":"RM-ET-M-G","price":119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/Rawrr-Mantis-db-magura-throttle-on-bike-02_82933645-69fd-4518-bf35-ab0e539dff09.jpg?v=1788105094"},{"product_id":"dirtybike-replacement-slider-chain-guide","title":"DirtyBike Replacement Slider Chain Guide","description":"\u003cp\u003eThe replacement wear slider for DirtyBike chain guides. The slider is the sacrificial part of a chain guide: it wears from the inside out as the chain rubs it, and swapping it before it wears through is what stops the chain reaching the aluminum bracket behind it.\u003c\/p\u003e\u003cp\u003eIt is a direct replacement for all DirtyBike chain guides and for the Rawrr Mantis X and Mini guides. Four colors are listed, black, blue, red and one DirtyBike calls ugly, sold as a single item at 0.37 lb shipping weight. Verified against the Talaria Sting R, Talaria Sting MX3, Talaria Sting MX4 and Rawrr Mantis. Check it whenever you adjust chain tension.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Black","offer_id":54486755213622,"sku":"db-RCGS-BK","price":15.0,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":54486755246390,"sku":"db-RCGS-BU","price":15.0,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":54486755279158,"sku":"db-RCGS-R","price":15.0,"currency_code":"USD","in_stock":true},{"title":"Ugly","offer_id":54486755311926,"sku":"db-RCGS-U","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/IMG_5635.png?v=1788105095"},{"product_id":"dirtybike-safety-tethered-kill-switch","title":"DirtyBike Safety Tethered Kill Switch","description":"\u003cp\u003eDirtyBike offers two different kill switches. While both adhere to AMA rules for racing electric motorbikes, one works with your existing key and the other replaces your existing key switch.\u003c\/p\u003e\u003cp\u003eFor everyday riding, the existing key option is recommended. If you are competing, the key replacement is a more robust option.\u003c\/p\u003e\u003cp\u003eAvailable for E Ride Pro, Light Bee, Talaria Sting, Ultra Bee and Rawrr Mantis X. A must for racers!\u003c\/p\u003e\u003cp\u003eKill Switch That Works With Stock Key Switch LBX, Talaria Sting: Unplug your original key switch and plug it into the mating connector on the Safety Kill Switch, then plug the remaining Safety Kill Switch connector to the original key connector from the bike.\u003c\/p\u003e\u003cp\u003eE RIDE PRO: Unplug the 2 pin connector with red wires from your original key switch and plug it into the mating connector on the Safety Kill Switch, then plug the remaining Safety Kill Switch connector to the original key connector from the bike.\u003c\/p\u003e\u003cp\u003eKill Switch That Replaces Stock Key Switch: Unplug your key switch and plug the new Safety Kill Switch directly into the original key switch connector.\u003c\/p\u003e\u003cp\u003eFits the Surron Light Bee X, Surron Ultra Bee, Talaria Sting R, Talaria Sting MX3, E-Ride Pro SS.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Light Bee | Talaria Sting MX3\/4 | ERide Pro SS","offer_id":54486755344694,"sku":"DB-Light-SKS-TUSK-WK","price":39.0,"currency_code":"USD","in_stock":true},{"title":"Replaces Key Switch Light Bee | Talaria Sting MX3\/4 | ERide Pro SS","offer_id":54486755377462,"sku":"DB-Light-SKS-TUSK-RK","price":39.0,"currency_code":"USD","in_stock":true},{"title":"Ultra Bee","offer_id":54486755410230,"sku":"DB-UB-SKS-TUSK-WK","price":39.0,"currency_code":"USD","in_stock":true},{"title":"Replaces Key Switch | Surron Ultra Bee","offer_id":54486755442998,"sku":"DB-UB-SKS-TUSK-RK","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/Surron-LBX-Talaria-Sting-db-DirtyBike-Kill-Switch_eb8e3687-b7f0-48fb-b886-6809f595eaa0.jpg?v=1788105099"},{"product_id":"dirtybike-standard-brake-pads","title":"DirtyBike Standard Brake Pads","description":"\u003cp\u003eThe standard replacement brake pads for bikes running mountain bike brake systems, front or rear. DirtyBike describes these as the pads fitted to almost all of the original, early e-moto machines, which is why they suit a wide spread of the first generation of these bikes.\u003c\/p\u003e\u003cp\u003eSold as a single item, shipping weight 0.25 lb. Verified against the Surron Light Bee X, Talaria Sting R, Talaria Sting MX3, Talaria Sting MX4 and E-Ride Pro SS. Compare the pad outline against the ones you are removing before fitting, since mountain bike caliper shapes vary, and bed a new set in gently over the first few stops rather than relying on them cold.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Default Title","offer_id":54486755475766,"sku":"TS-35533-56000-000","price":22.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/Talaria-Sting-OEM-Brake-Pads.jpg?v=1788105099"},{"product_id":"dirtybike-sur-ron-oem-lbx-motor-woodruff-key","title":"DirtyBike Sur-Ron OEM LBX Motor Woodruff Key","description":"\u003cp\u003eThe OEM Woodruff key for the Surron Light Bee X motor. It is a small half-moon key that sits in a slot in the motor shaft and keys the drive sprocket to it, and it is what actually carries the torque between the two rather than the sprocket clamp.\u003c\/p\u003e\u003cp\u003eSold as a single item under the original part number, shipping weight 0.13 lb. Verified against the Surron Light Bee X. Replace it whenever the sprocket comes off, since a key that has started to round will let the sprocket move a fraction under load, and that movement is what damages the keyway in the shaft itself, which is not a repairable part.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Default Title","offer_id":54486755508534,"sku":"LB-B6-003-05-016","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/Surron-LBX-OEM-Woodruff-Key.jpg?v=1788105100"},{"product_id":"dirtybike-surron-lbx-219-kmc-non-sealed-primary-belt-to-economy-chain-conversion","title":"DirtyBike Surron LBX 219 KMC Non-Sealed Primary Belt to Economy Chain Conversion Kit","description":"\u003cp\u003eRide long enough and eventually you will have primary belt slippage which will inevitably lead to belt failure. Don't be the guy that holds up your whole group because you just snapped a belt and have to be towed back. Upgrading to a DirtyBike primary chain drive system ensures you will never have belt issues again. Whether you are on a huge ride out or trail riding with friends, DirtyBike primary chain drive kits give you the peace of mind you need to ride wherever you want with confidence.\u003c\/p\u003e\u003cp\u003eFits all Surron Light Bee and Segway X260\/160.\u003c\/p\u003e\u003cp\u003eOn road and light off road with stock power\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKMC Non sealed chain\u003c\/li\u003e\n\u003cli\u003eHardened steel sprockets for reduced wear\u003c\/li\u003e\n\u003cli\u003eKit is 20% lighter and more efficient than the stock belt system\u003c\/li\u003e\n\u003cli\u003eBetter Acceleration\u003c\/li\u003e\n\u003cli\u003eLonger Run Time\u003c\/li\u003e\n\u003cli\u003eMaintains Stock Gear Ratio\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFits the Surron Light Bee X.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Default Title","offer_id":54486755541302,"sku":"LB-PCD-219KMC-G","price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/Surron-LBX-db-PrimaryChainDrive-219-KMC-nonsealed-02_32e8e5eb-3815-473a-8145-aa6b616f3e87.jpg?v=1788105103"},{"product_id":"dirtybike-surron-lbx-219-rk-non-sealed-primary-belt-to-chain-conversion-kit","title":"DirtyBike Surron LBX 219 RK Non-Sealed Primary Belt to Chain Conversion Kit","description":"\u003cp\u003eRide long enough and eventually you will have primary belt slippage which will inevitably lead to belt failure. Don't be the guy that holds up your whole group because you just snapped a belt and have to be towed back. Upgrading to a DirtyBike primary chain drive system ensures you will never have belt issues again. Whether you are on a huge ride out or trail riding with friends, DirtyBike primary chain drive kits give you the peace of mind you need to ride wherever you want with confidence.\u003c\/p\u003e\u003cp\u003eThe RK 219 non-sealed chain has the least amount of drag giving you the best performance. RK has won over 50 World Kart championships with this chain.\u003c\/p\u003e\u003cp\u003eDirtyBike's 219 RK primary chain drive system minimizes drag but is a little louder than the RK sealed chains.\u003c\/p\u003e\u003cp\u003eProper lubrication and adjustment will ensure your chain kit will last years and remain almost as quiet as the stock belt system.\u003c\/p\u003e\u003cp\u003eDirtyBike Belt to Chain Conversion Kit features:\u003c\/p\u003e\u003cp\u003eOn road and light off road with stock power\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRK non-sealed racing chain\u003c\/li\u003e\n\u003cli\u003eHardened steel sprockets for reduced wear\u003c\/li\u003e\n\u003cli\u003eKit is 20% lighter and more efficient than the stock belt system\u003c\/li\u003e\n\u003cli\u003eBetter Acceleration\u003c\/li\u003e\n\u003cli\u003eLonger Run Time\u003c\/li\u003e\n\u003cli\u003eMaintains Stock Gear Ratio\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFits the Surron Light Bee X.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Default Title","offer_id":54486755574070,"sku":"LB-PCD-219RK-NOR","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/LightBee-Primary-Chain-RK-non-sealed_0c86a945-4c1d-46a6-9c83-689113d71dd8.jpg?v=1788105104"},{"product_id":"dirtybike-surron-lbx-420-primary-chain-drive-alignment-shim","title":"DirtyBike Surron LBX 420 Primary Chain Drive Alignment Shim","description":"\u003cp\u003eIs your primary chain drive louder than you want? The Surron Light Bee frame varies over time and when you install a primary chain drive you may find that the alignment from the motor sprocket to the primary driven sprocket may be off.\u003c\/p\u003e\u003cp\u003eThis causes a lot of noise and premature wear on the sprockets and the chain. Bring those sprockets back into alignment with a DirtyBike primary driven sprocket shim.\u003c\/p\u003e\u003cp\u003eShims are 1mm thick aluminum and most bikes usually only need one shim. Shim fits between the driven sprocket and the jack shaft.\u003c\/p\u003e\u003cp\u003eFits the Surron Light Bee X.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Default Title","offer_id":54486755606838,"sku":"LB-PD-SHIM","price":6.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/Surron-LightBee-db-PrimaryChainDrive-shim_5f3a2dc1-41d9-4ca3-ad80-add229981702.jpg?v=1788105104"},{"product_id":"dirtybike-surron-lbx-420-rk-mxu-primary-belt-to-chain-conversion-kit","title":"DirtyBike Surron LBX 420 RK MXU Primary Belt to Chain Conversion Kit","description":"\u003cp\u003eDon’t risk your stock belt failing in the middle of a ride — install a DirtyBike primary chain drive system. With the world famous RK 420 GB MXU chain, this is a necessary upgrade for the serious off-road rider and maintains stock gear ratio.\u003c\/p\u003e\u003cp\u003eRK GB 420 MXU Sealed chain is one of the strongest and quietest 420 chains available. Master link makes for easier installation and the chain can be replaced easily without removing the swing arm.\u003c\/p\u003e\u003cp\u003eKit comes with DirtyBike exclusive 1mm aluminum alignment shim allowing you to adjust the sprocket alignment for a quieter, longer lasting drive system.\u003c\/p\u003e\u003cp\u003eOn road and light off road with stock power\u003c\/p\u003e\u003cp\u003eFits the Surron Light Bee X.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Default Title","offer_id":54486755639606,"sku":"LB-PCD-GS-420-RK-MXU-G","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/Surron-LBX-db-420RK-gold-replacement-chain_cc84f677-8c2e-4f67-abde-27a5ffbadeef.jpg?v=1788105108"},{"product_id":"dirtybike-surron-lbx-420-sealed-x-ring-primary-belt-to-chain-conversion-kit","title":"DirtyBike Surron LBX 420 Sealed X-Ring Primary Belt to Chain Conversion Kit","description":"\u003cp\u003eDirtyBike primary chain drive system with sealed X-ring chain minimizes drag and reduces chain noise, providing a longer lasting drive system. Fits Surron Light Bee\u003c\/p\u003e\u003cp\u003eThis is a much stronger chain and is considered a necessary upgrade for off-road riders. If you ride in dusty, sandy or muddy conditions you will eventually have primary belt slippage which will cause failure of the stock primary belt. Upgrading to a chain kit means you are less likely to be stranded in the middle of nowhere.\u003c\/p\u003e\u003cp\u003e420 Sealed X-ring chain with master link can be replaced easily without removing the swing arm.\u003c\/p\u003e\u003cp\u003eThis kit comes with DirtyBike exclusive 1mm aluminum alignment shim allowing you to adjust the sprocket alignment for a quieter, longer lasting drive system.\u003c\/p\u003e\u003cp\u003eOn road and light off road with stock power\u003c\/p\u003e\u003cp\u003eFits the Surron Light Bee X.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Default Title","offer_id":54486755672374,"sku":"LB-PCD-420-GS-XR-G","price":87.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/E_Ride_Pro-PrimaryChainDrive-420-Xring_6145c134-0961-45c7-b37b-3e66ee636402.jpg?v=1788105108"},{"product_id":"dirtybike-surron-lbx-aluminum-rear-brake-disk-guard","title":"DirtyBike Surron LBX Aluminum Rear Brake Disk Guard","description":"\u003cp\u003eA rear brake disk guard for the Surron Light Bee X, machined from CNC billet 60 series aluminum. On trail and woods riding the rear disk is exposed to every stick and rock the back wheel picks up, and a bent disk means no rear brake for the rest of the ride.\u003c\/p\u003e\u003cp\u003eHard anodized in black, blue, red, orange and green, sold as a single item at 0.43 lb shipping weight. Verified against the Surron Light Bee X. Check the guard has clearance to the disk through full suspension travel after fitting, since a guard touching a spinning rotor is worse than no guard at all.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Black","offer_id":54486755705142,"sku":"LB-BDG-AL-B","price":69.0,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":54486755737910,"sku":"LB-BDG-AL-BL","price":69.0,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":54486755770678,"sku":"LB-BDG-AL-R","price":69.0,"currency_code":"USD","in_stock":true},{"title":"Orange","offer_id":54486755803446,"sku":"LB-BDG-AL-O","price":69.0,"currency_code":"USD","in_stock":true},{"title":"Green","offer_id":54486755836214,"sku":"LB-BDG-AL-G","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/Surron-LBX-db-Aluminum-Rear-Brake-Disk-Guard-Blue.jpg?v=1788105109"},{"product_id":"dirtybike-surron-lbx-aluminum-suspension-triangle","title":"DirtyBike Surron LBX Aluminum Suspension Triangle","description":"\u003cp\u003eA reinforced rear suspension progression triangle for the Surron Light Bee X, replacing the stock unit. It is machined from CNC billet 60 series aluminum, which DirtyBike rates as both stronger and lighter than stock, and it will not rust or corrode where the stock part sits low and wet.\u003c\/p\u003e\u003cp\u003eHard anodized in blue, red and gold, sold as a single item at 1.00 lb shipping weight. Verified against the Surron Light Bee X. The linkage bearings are a separate part number, so inspect them while the triangle is out: fitting a new triangle onto worn bearings gives back none of the precision you were chasing.\u003c\/p\u003e","brand":"DirtyBike","offers":[{"title":"Blue","offer_id":54486755868982,"sku":"LB-SUST-AL-BL","price":42.0,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":54486755901750,"sku":"LB-SUST-AL-R","price":42.0,"currency_code":"USD","in_stock":true},{"title":"Gold","offer_id":54486755934518,"sku":"LB-SUST-AL-G","price":42.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/Surron-LightBee-db-Aluminum-Suspension-Triangle-blue_77a74518-bb82-4615-b709-551dc2b45fc0.jpg?v=1788105112"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/collections\/mh-coll-dirtybike.jpg?v=1788106205","url":"https:\/\/motorhabit.com\/collections\/dirtybike.oembed?page=2","provider":"MotorHabit","version":"1.0","type":"link"}