{"title":"Controls","description":"\u003cp\u003eControls are the parts you feel on every ride and the ones most people never change. A stock Light Bee X puts a taller rider in a crouch; a 7075 tapered bar with +40 mm machined risers for the stock 28.6 mm clamp fixes that in an afternoon. Soft-compound half-waffle grips are the cheapest upgrade in the store and the first one worth doing on any stock bike.\u003c\/p\u003e\u003cp\u003eEvery kit here shows its verified fitment for the Surron Light Bee X, Ultra Bee and Talaria Sting R. Bar and clamp diameters are in the specs so you can check them against your cockpit before you order.\u003c\/p\u003e","products":[{"product_id":"fardriver-controller-bluetooth-programming-dongle","title":"FarDriver Controller Bluetooth Programming Dongle","description":"\u003cp\u003eA Bluetooth dongle that lets you change FarDriver controller parameters from your phone instead of living with the factory map. It plugs into the controller's programming port and pairs with the FarDriver app. Fitment is the Yozma IN 10 and IN 10 Pro.\u003c\/p\u003e\u003cp\u003eUse it to adjust current limits, throttle ramp and speed settings. Connection is through the controller programming port; the interface is Bluetooth to the FarDriver app. Write down or screenshot the stock values before you change anything so you can return to a known-good map, and make one change at a time so you can tell what each setting actually did on the trail.\u003c\/p\u003e","brand":"Yozma","offers":[{"title":"Default Title","offer_id":54415709471030,"sku":"YM2ButhmoUSBK1A","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/9fd7b01d7f57240e5a3b7482d0324bf3.png?v=1786903966"},{"product_id":"yozma-in-10-brake-lever","title":"Yozma IN 10 Brake Lever","description":"\u003cp\u003eReplacement hydraulic brake lever and master cylinder for the Yozma IN 10. Levers are the first casualty of any tip-over, and this is the part most riders end up buying twice. It is a complete lever and master cylinder assembly, not just the blade.\u003c\/p\u003e\u003cp\u003eSelect left or right. Fitment is the IN 10. The clamp fits the stock handlebar diameter and mounts in the original position. Because the master cylinder comes with the lever, plan on bleeding the brake after fitting; have fluid and a bleed kit ready. Angle the lever so your wrist is straight when seated, and pump it until firm before rolling the bike.\u003c\/p\u003e","brand":"Yozma","offers":[{"title":"Left","offer_id":54415710617910,"sku":"YM2IN10005LUSBK1A","price":25.99,"currency_code":"USD","in_stock":false},{"title":"Right","offer_id":54415710650678,"sku":"YM2IN10005RUSBK1A","price":25.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/879b43fa1a6fe62a01af0e2cc0e05cc8_e1dd6a45-222a-4a23-8a8f-e8a380e007be.png?v=1786903982"},{"product_id":"yozma-in-10-headlight-switch","title":"Yozma IN 10 Headlight Switch","description":"\u003cp\u003eThe handlebar switch that turns the headlight on and off on the Yozma IN 10. Switch bodies fill with water and corrode from the inside on a bike that gets washed regularly, which shows up as an intermittent headlight long before the switch fails outright. Replacing the switch is the fix.\u003c\/p\u003e\u003cp\u003eFitment is the IN 10. It mounts with a handlebar clamp in the stock position. Before you blame the headlight, wiggle the switch with the light on; if the beam flickers, the switch is the culprit. When fitting, route the lead the same way as the original so it does not snag at full lock, and point the switch opening away from the wash spray.\u003c\/p\u003e","brand":"Yozma","offers":[{"title":"Default Title","offer_id":54415710748982,"sku":"YM1IN10002USBK1A","price":14.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/f399a8924e381c1df740d97255489a14_3fb4da58-973f-4456-8f24-0d0ab86a82af.png?v=1786903984"},{"product_id":"yozma-in-10-ignition-lock-set","title":"Yozma IN 10 Ignition Lock Set","description":"\u003cp\u003eA matched ignition barrel and key set for the Yozma IN 10. It is the fix for a lost key, or for a barrel that has worn to the point where the key turns without positive detents or can be pulled out in any position. Replacing the set restores a proper key that only you hold.\u003c\/p\u003e\u003cp\u003eIncludes the ignition barrel and keys. Fitment is the IN 10. Fit the barrel in the stock ignition position. Keep one key somewhere other than the bike or your riding kit; a spare on the key ring in your jacket is no spare at all once the jacket goes missing with the bike. Keep the surround cover in place to stop water getting into the new barrel.\u003c\/p\u003e","brand":"Yozma","offers":[{"title":"Default Title","offer_id":54415710847286,"sku":"YM2IN10032USBK1C","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/be97f6bae6dc41f3da565c9bf14e3adc_f78e3644-65ac-43b2-a5c6-dda7c7e8e293.png?v=1786903989"},{"product_id":"yozma-in-10-controller","title":"Yozma IN 10 Controller","description":"\u003cp\u003eThe motor controller for the Yozma IN 10, the box that decides how the bike delivers its power. Buy it to replace a failed controller, or to keep a spare if you ride far from the van. A controller that cuts out under load, throws fault codes or will not power up is the usual reason to fit one.\u003c\/p\u003e\u003cp\u003eFitment is the IN 10. It uses the stock harness plugs and mounts in the stock controller tray, so it is a like-for-like swap. Before fitting a new controller, find out why the old one failed. A chafed power cable or a water-filled connector will take out the new controller as well, so inspect the harness and dry the tray first.\u003c\/p\u003e","brand":"Yozma","offers":[{"title":"Default Title","offer_id":54415711764790,"sku":"YM2IN10006USBK1C","price":180.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/e1e549ff5e25ae07eccdd1dba13a726c_a5a23cd0-0d6f-4284-a491-a1bd41ed9516.png?v=1786904009"},{"product_id":"yozma-in-10-twist-throttle","title":"Yozma IN 10 Twist Throttle","description":"\u003cp\u003eReplacement twist throttle for the Yozma IN 10, with the sensor built in. A throttle that has gone notchy, sticky or lazy returning to closed is a safety problem rather than an annoyance, so replace it rather than lubricating around the symptoms. This is the stock unit.\u003c\/p\u003e\u003cp\u003eFitment is the IN 10. The clamp fits the stock handlebar diameter and the sensor is integrated, so it is one unit to fit. Check that the grip snaps fully closed with the bars turned to both locks before you ride; a lead routed too tight at one lock will hold the throttle open slightly. Keep the grip and tube clean of grit so it keeps returning freely.\u003c\/p\u003e","brand":"Yozma","offers":[{"title":"Default Title","offer_id":54415711797558,"sku":"YM1IN10001USBK1A","price":34.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/95d280ca05dbeabb531c39ec85b47eee_a95b6c1f-1722-415c-95f0-4e96828780d9.png?v=1786904010"},{"product_id":"yozma-in-10-handlebar","title":"Yozma IN 10 Handlebar","description":"\u003cp\u003eReplacement handlebar for the Yozma IN 10 in the stock bend. A bar that has been straightened after a crash is work-hardened at the bend and will fold without warning the second time, so replace rather than re-bend. This bar puts the controls back where the bike was designed to have them.\u003c\/p\u003e\u003cp\u003eFitment is the IN 10. The bend matches the stock IN 10 profile and the clamp area matches the stock riser spacing, so it goes straight into the original risers. You will be moving the grips, levers, throttle and switches across, so note their positions before you strip the old bar. Tighten the riser clamps evenly in a cross pattern.\u003c\/p\u003e","brand":"Yozma","offers":[{"title":"Default Title","offer_id":54415711895862,"sku":"YM1IN10060USBK1A","price":99.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/9ed434bdc929812d8030948f57d8e88f.png?v=1786904014"},{"product_id":"yozma-in-10-pedals","title":"Yozma IN 10 Pedals","description":"\u003cp\u003eReplacement footpegs for the Yozma IN 10, sold as a pair. Pegs take every landing you get slightly wrong, and rounded-off teeth cost you grip exactly when standing up matters most. A bent peg also shifts your foot position, which throws off your weight over the bike.\u003c\/p\u003e\u003cp\u003eSold as a pair. Fitment is the IN 10. They mount to the stock peg mounts. When you fit them, check the pivot pins and springs on the mounts; a tired spring lets the peg fold under your boot on a hard landing. Clean packed mud out of the mount before the new pegs go in so they fold and return freely.\u003c\/p\u003e","brand":"Yozma","offers":[{"title":"Default Title","offer_id":54415712092470,"sku":"YM1IN10014FUSBK1A","price":50.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/7afbcc461adc0e6e4096bd45c769fbd6.png?v=1786904021"},{"product_id":"yozma-in-10-g518-display","title":"Yozma IN 10 G518 Display","description":"\u003cp\u003eThe G518 handlebar display for the Yozma IN 10. It shows speed, ride mode and battery state of charge. Displays are usually the first electronic part to fail on a bike that lives outside, because the seal around the buttons is what lets go and moisture gets behind the screen.\u003c\/p\u003e\u003cp\u003eModel G518. Fitment is the IN 10. It mounts with a handlebar clamp in the stock position. If your display fogs inside or the buttons have gone soft, replace it before it takes the rest of the bike's readouts with it. Route the lead so the bars can turn lock to lock without pulling on the connector, and cover the bike when it sits outside.\u003c\/p\u003e","brand":"Yozma","offers":[{"title":"Default Title","offer_id":54415712158006,"sku":"YM2IN10015USBK1C","price":99.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/G518.png?v=1786904023"},{"product_id":"yozma-in-10-hand-grips-left-and-right","title":"Yozma IN 10 Hand Grips, Left \u0026 Right","description":"\u003cp\u003eA matched pair of replacement grips for the Yozma IN 10. Worn, hardened grips are the cheapest fix for arm pump and hand fatigue that riders usually blame on suspension. This set replaces both sides so the left and right feel the same.\u003c\/p\u003e\u003cp\u003eSold as a left and right pair. Fitment is the IN 10, stock bar diameter. Cut the old grips off rather than fighting them, clean the bar and throttle tube, and fit the new ones. Let any adhesive you use set before riding, and check that the throttle-side grip does not bind against the bar end when the throttle returns.\u003c\/p\u003e","brand":"Yozma","offers":[{"title":"Default Title","offer_id":54415712190774,"sku":"YM1IN10038USBK1A","price":50.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/6075884a1548d1f3fa991cc17800abb5.png?v=1786904024"},{"product_id":"heybike-villain-bluetooth-app-module","title":"Heybike Villain Bluetooth App Module","description":"\u003cp\u003eA Bluetooth module for the Heybike Villain (V1) that connects the bike to the Heybike phone app. Once it is fitted, ride data and setting changes are handled from your phone instead of by cycling through menus on the bar display. It adds app connectivity to a Villain that did not come with it, or replaces a module that has stopped pairing.\u003c\/p\u003e\u003cp\u003eThe interface is Bluetooth to the Heybike app, and the function is ride data plus setting changes. Fitment is the Heybike Villain V1. Pair the module with the app before you ride so you can confirm it is reading the bike, and keep the display on the bars, since the app supplements rather than replaces it. If the app will not find the bike after fitting, check that the module is fully seated and powered before assuming it is faulty.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415712321846,"sku":"YM2ButhmoUSBK1A","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/6d6592498c1cb5959fa04d498780b0e3.webp?v=1786904028"},{"product_id":"heybike-villain-ignition-key-switch-lock","title":"Heybike Villain Ignition Key Switch Lock","description":"\u003cp\u003eA matched ignition barrel and key set for the Heybike Villain (V1). It replaces the original ignition switch when the keys are lost, or when the barrel has worn far enough that the key turns without positive detents and no longer clicks firmly into each position. Because the keys are matched to the barrel, there is no need to track down a locksmith.\u003c\/p\u003e\u003cp\u003eThe set includes the ignition barrel and its keys. Fitment is the Heybike Villain V1, and the barrel takes the place of the original switch. Once fitted, keep the spare key somewhere other than on the bike, since losing both means replacing the barrel again. Test that the key turns cleanly through every position before you close the bike up, and that the bike powers down fully in the off position.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415712682294,"sku":"HB2Villain032USBK1A","price":37.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/1_71d03d63-b821-46a8-a4ad-971c0b3cc54e.jpg?v=1786904036"},{"product_id":"heybike-villain-handlebar","title":"Heybike Villain Handlebar","description":"\u003cp\u003eReplacement handlebar for the Heybike Villain (V1) in the stock bend, so the riding position and control reach stay the same as they were from the factory. It is the part for a bar that has been folded in a crash or bent at the clamps. A bar that has been bent straight again is work-hardened where it folded and will go a second time without warning, so replace it rather than re-bending.\u003c\/p\u003e\u003cp\u003eThe bend is the stock Villain profile and the clamp section matches the stock riser spacing, so it fits the existing risers without shims or new clamps. Fitment is the Heybike Villain V1. When swapping, move the grips, throttle, levers and switches across one at a time so the cable runs stay where they were, then center the bar in the risers and tighten the clamps evenly in a cross pattern.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415713861942,"sku":"HB2Villain060USBK1A","price":123.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/9ed434bdc929812d8030948f57d8e88f_1f882ac5-8a5a-4a7e-9ef8-34a48871c6da.png?v=1786904067"},{"product_id":"heybike-villain-right-brake-lever","title":"Heybike Villain Right Brake Lever","description":"\u003cp\u003eThe right-hand hydraulic brake lever and master cylinder for the Heybike Villain V1. It is sold individually, because you rarely break both levers in the same crash.\u003c\/p\u003e\u003cp\u003eType is a hydraulic lever with master cylinder; side is right; the clamp fits the stock handlebar diameter. Fitment is the Villain V1. Fitting a new master cylinder means connecting the hose and bleeding that brake, so have fluid and a bleed kit ready. Position the clamp so the lever can rotate slightly in a crash rather than snap, and the new one will last longer than the one it replaces.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415714025782,"sku":"HB2Villain005RUSBK1A","price":56.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/9b1a7b35789faa7f7b25b908a346bd46.png?v=1786904072"},{"product_id":"heybike-villain-left-brake-lever","title":"Heybike Villain Left Brake Lever","description":"\u003cp\u003eThe left-hand hydraulic brake lever and master cylinder for the Heybike Villain V1. Levers snap in almost every tip-over, so this is the spare worth having in the van before you need it.\u003c\/p\u003e\u003cp\u003eType is a hydraulic lever with master cylinder; side is left; the clamp matches the stock handlebar diameter. Fitment is the Villain V1. Because the master cylinder is part of the assembly, expect to bleed that brake after fitting. Set the clamp snug but not fully locked so the lever can pivot on the bar in a fall, and carry the old lever as a trail spare if only the blade is damaged.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415714058550,"sku":"HB2Villain005LUSBK1A","price":56.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/aa0e53f577c8041eb0dcd8445a8e0e4d.png?v=1786904073"},{"product_id":"heybike-villain-footpegs-left-and-right","title":"Heybike Villain Footpegs, Left \u0026 Right","description":"\u003cp\u003eA matched pair of footpegs, left and right, for the Heybike Villain (V1). Pegs absorb every landing you get slightly wrong, and once the teeth round off you lose grip precisely when standing on them matters. These replace a pair that has worn smooth or bent, and they fit the stock peg mounts on the frame.\u003c\/p\u003e\u003cp\u003eSold as a left and right pair, so both sides wear evenly from the same date. Fitment is the Heybike Villain V1 and mounting is to the stock peg mounts, reusing the existing hardware. Check the mounts for wear when you pull the worn pegs off, since a sloppy mount lets a new peg rock. Once fitted, confirm each peg folds up and returns before riding, and stand on both to make sure the teeth bite evenly.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415714091318,"sku":"HB2Villain014USBK1A","price":73.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/a32a40ee3ffaf2f858f78ed3f5d113a5.png?v=1786904074"},{"product_id":"heybike-villain-right-hand-grip","title":"Heybike Villain Right Hand Grip","description":"\u003cp\u003eThe right-hand grip for the Heybike Villain (V1), sold individually. This is the throttle-side grip, the one that wears out first because it takes the twisting load every time you get on the power. Buying it on its own means you replace the worn grip without paying for a left grip that is still fine.\u003c\/p\u003e\u003cp\u003eSold as a single grip for the right, throttle side. The bar diameter is stock, so it goes onto the Villain's throttle without trimming. Fitment is the Heybike Villain V1. When fitting, slide the old grip off without cutting into the throttle tube underneath, clean the tube, and make sure the new grip does not rub the bar or switch housing and slow the throttle's return before you ride. The matching left grip is listed separately.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415714124086,"sku":"HB2Villain038RUSBK1A","price":48.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/405b76520180c4de360eed83fe837a5c_3b05bcbf-6a7c-4f29-8da3-616618e2808e.png?v=1786904078"},{"product_id":"heybike-villain-left-hand-grip","title":"Heybike Villain Left Hand Grip","description":"\u003cp\u003eThe left-hand grip for the Heybike Villain (V1), sold individually. The left grip usually outlasts the throttle side, so buying singly saves replacing a grip that is still in good shape. It replaces a left grip that has torn, spun on the bar, or been damaged in a drop.\u003c\/p\u003e\u003cp\u003eSold as a single left grip in the stock bar diameter, so it fits the Villain's handlebar directly. Fitment is the Heybike Villain V1. To fit, remove the old grip, clean the bar end so there is no residue underneath, and work the new grip on fully so it sits against the bar end. A grip that will not stop spinning is usually sitting on a dirty bar rather than being the wrong size. The throttle-side grip is listed separately.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415714156854,"sku":"HB2Villain038LUSBK1A","price":48.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/3b31c278c56a9867c25407883eed84ad_671d364f-ed6f-4cf8-b9be-ac0b1a497585.png?v=1786904079"},{"product_id":"heybike-villain-twist-throttle","title":"Heybike Villain Twist Throttle","description":"\u003cp\u003eReplacement twist throttle for the Heybike Villain (V1). It is a twist throttle with the sensor integrated into the unit, replacing the original when it sticks, hesitates, or returns slowly. A throttle that hesitates on the way back to closed is a genuine safety issue, not a maintenance item to defer, so swap it rather than riding around it.\u003c\/p\u003e\u003cp\u003eThe throttle clamps to the stock handlebar diameter and fits the Heybike Villain V1. Because the sensor is integrated, the throttle body and sensor are replaced together rather than separately. When fitting, route the lead the same way as the original so it is not pinched at full lock, and check that the throttle snaps fully closed on its own with the bars turned both ways before powering the bike on.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415714189622,"sku":"HB2Villain001USBK1A","price":73.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/202b49e346a01a8cc954434091602648.png?v=1786904080"},{"product_id":"heybike-villain-display","title":"Heybike Villain Display","description":"\u003cp\u003eThe handlebar display for the Heybike Villain (V1). It shows speed, ride mode and battery state of charge, and it replaces a display that has fogged, lost segments, or stopped responding to its buttons. The button seal is what usually fails first on a bike that lives outdoors, so a fogged or dead display is common and cheap to fix.\u003c\/p\u003e\u003cp\u003eThe display mounts with a handlebar clamp in the stock position and fits the Heybike Villain V1. Fitting is a matter of unplugging the old unit, swapping the clamp over, and connecting the new display to the existing lead. Before you condemn a display, check the connector at the back for corrosion, since a green plug can mimic a dead screen. Once fitted, confirm ride mode and battery readings match what the bike is doing.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415714222390,"sku":"HB2Villain015USBK1A","price":123.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/d5ae89a86a87e82c576cad8aeceb7cfe.png?v=1786904080"},{"product_id":"heybike-villain-controller","title":"Heybike Villain Controller","description":"\u003cp\u003eThe motor controller for the Heybike Villain (V1). This is the part that translates throttle position into current, so a failing one shows up as cutouts and flat spots long before it dies completely. It replaces the original controller when the bike cuts out under load, hesitates off the line, or stops responding to the throttle entirely.\u003c\/p\u003e\u003cp\u003eThe controller uses the stock harness plugs and mounts in the stock controller tray, so it is a plug-for-plug swap with no splicing. Fitment is the Heybike Villain V1. Disconnect the battery before unplugging anything, label the connectors as you go, and seat each plug until it clicks. Rule out a loose connector and a worn throttle first, since both produce the same cutouts a bad controller does.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415714386230,"sku":"HB2Villain006USBK1A","price":225.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/e1e549ff5e25ae07eccdd1dba13a726c.png?v=1786904086"},{"product_id":"heybike-phone-holder","title":"Heybike Phone Holder","description":"\u003cp\u003eA handlebar phone mount from Heybike, so navigation sits in your eyeline instead of your pocket. It clamps to the bar alongside the display and adds a phone position to a bike that does not have one. Fitment is listed as universal, so it is not tied to a single Heybike model and can move between bikes.\u003c\/p\u003e\u003cp\u003eMounting is a handlebar clamp. Fit it where the phone does not block the display or crowd the brake lever and throttle, and tighten it enough that it does not rotate over bumps. Give the phone a firm shake by hand before riding, and recheck the clamp after the first few rides, since a mount that creeps on the bar will eventually point the screen at the ground. If the bar is crowded, try the other side of the stem.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415724118326,"sku":"XT2HolderUSBK1A","price":61.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/a683ac1a63031d27374f3957a72c33c4.png?v=1786905110"},{"product_id":"heybike-bar-end-mirrors-left-and-right","title":"Heybike Bar-End Mirrors, Left \u0026 Right","description":"\u003cp\u003eA pair of bar-end mirrors from Heybike, supplied as a left and right set. On a commuter that spends time in traffic these do more for your safety than any amount of extra lighting, since seeing a car closing on you is what lets you act early. They mount at the ends of the handlebar and fitment is universal rather than model-specific.\u003c\/p\u003e\u003cp\u003eSold as a left and right pair, mounting bar-end. Fitting means clearing the bar ends so the mirror stems can go in, then tightening them so they hold position over bumps. Set each mirror so the tip of your shoulder is just visible at the inside edge, which gives the widest useful view behind, and recheck the angle after the first ride since new mounts settle. Fitting both sides covers the lane on either side of you.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Left \u0026 Right","offer_id":54415724314934,"sku":"EB-MIRROR2","price":48.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/1_d7eca041-fb68-4027-8c99-45e9daeb63a2.jpg?v=1786905115"},{"product_id":"heybike-alpha-headset","title":"Heybike Alpha Headset","description":"\u003cp\u003eThe headset bearing set for the Heybike Alpha, the bearings the steering turns on in the head tube. Notchy or indexed steering that wants to center itself means the bearing races are pitted, and no amount of adjustment brings that back. This set replaces those worn bearings and restores smooth, even steering from lock to lock.\u003c\/p\u003e\u003cp\u003eType is a headset bearing set, position is the head tube, and fitment is the Heybike Alpha. Fitting means dropping the fork, lifting out the old bearings and seating the new ones, then setting preload so there is no play but the bars fall freely to either side under their own weight. Check the head tube seats for damage while the fork is out, and re-torque the stem bolts after the first ride.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Alpha","offer_id":54415724577078,"sku":"HB2ALPHA008WZUSBK1","price":61.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/HB2ALPHA008WZUSBK1A.png?v=1786905121"},{"product_id":"heybike-alpha-throttle","title":"Heybike Alpha Throttle","description":"\u003cp\u003eReplacement throttle for the Heybike Alpha, with the sensor integrated into the throttle body. It replaces the original when it sticks, feels gritty, or is slow to return. A throttle that is slow returning to closed is a safety problem rather than a maintenance item, so replace it rather than working around it.\u003c\/p\u003e\u003cp\u003eType is a throttle with integrated sensor, the clamp is the stock handlebar diameter, and fitment is the Heybike Alpha. Fitting means sliding off the grip, swapping the throttle onto the bar and connecting the lead to the existing plug. Route the lead so it is not pinched at full lock, then confirm the throttle snaps fully closed on its own with the bars turned each way before you power the bike on.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Alpha","offer_id":54415725134134,"sku":"HB2ALPHA001USBK1","price":61.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/HB2ALPHA001USBK1A.png?v=1786905125"},{"product_id":"heybike-2-in-1-headlight-and-horn-switch","title":"Heybike 2-in-1 Headlight \u0026 Horn Switch","description":"\u003cp\u003eThe combined headlight and horn switch that sits on the handlebar of Heybike commuter e-bikes. It replaces a switch whose horn has gone intermittent or whose headlight button no longer clicks. Switch bodies take on water and corrode internally on a bike that lives outside, which shows first as an intermittent horn. Fitments cover the Ranger, Ranger S, Cityrun, Explore, Race Max, Mars, Mars 2.0, Brawn, Cityscape, Sola and Horizon.\u003c\/p\u003e\u003cp\u003eFunctions are headlight and horn in one body, and it mounts with a handlebar clamp. Select your bike from the Fits bike option. Fitting is a clamp swap and a plug change, so no cutting or soldering is needed. Position the switch where your thumb reaches it without shifting your grip, and check that both functions work before you button things up. Keeping the bike under cover slows the corrosion that kills these switches.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Ranger","offer_id":54415725330742,"sku":"Ranger-002","price":22.38,"currency_code":"USD","in_stock":false},{"title":"Cityrun","offer_id":54415725363510,"sku":"Cityrun-002","price":22.38,"currency_code":"USD","in_stock":true},{"title":"Explore","offer_id":54415725396278,"sku":"Explore-002","price":22.38,"currency_code":"USD","in_stock":false},{"title":"Race Max","offer_id":54415725429046,"sku":"RaceM-002","price":22.38,"currency_code":"USD","in_stock":true},{"title":"Mars","offer_id":54415725461814,"sku":"Mars-002","price":22.38,"currency_code":"USD","in_stock":true},{"title":"Mars 2.0","offer_id":54415725494582,"sku":"Mars-002-2","price":22.38,"currency_code":"USD","in_stock":false},{"title":"Ranger S","offer_id":54415725527350,"sku":"Rans-002","price":22.38,"currency_code":"USD","in_stock":false},{"title":"Brawn","offer_id":54415725560118,"sku":"Brawn-002","price":22.38,"currency_code":"USD","in_stock":false},{"title":"Cityscape","offer_id":54415725592886,"sku":"Cityscape-002","price":22.38,"currency_code":"USD","in_stock":false},{"title":"Sola","offer_id":54415725625654,"sku":"sola-002","price":22.38,"currency_code":"USD","in_stock":false},{"title":"Horizon","offer_id":54415725658422,"sku":"Horizon-002","price":17.9,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/1_46350a4d-a3a9-4bb4-a2cf-2f235875f527.jpg?v=1786905130"},{"product_id":"heybike-head-tube","title":"Heybike Head Tube","description":"\u003cp\u003eThe head tube assembly for Heybike e-bikes, the steering junction between fork and frame. It is a service part for crash damage or badly pitted bearing seats, where the steering has gone rough and no bearing swap cures it. Fitments are listed for the Ranger, Ranger S, Mars, Race Plus, Race Max, Explore, Sola, Tyson, Cityrun, Brawn and Cityscape.\u003c\/p\u003e\u003cp\u003ePosition is the steering and head tube area. Select your bike from the Fits bike option so the assembly matches your frame. Fitting means dropping the fork and moving the steering parts across, then setting preload so there is no play and the bars swing freely. If the bearing seats in your old unit are pitted, replace the bearings at the same time rather than running worn races in a fresh assembly. Check preload again after the first ride.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Ranger S","offer_id":54415727001910,"sku":"Rans-020","price":48.75,"currency_code":"USD","in_stock":true},{"title":"Mars","offer_id":54415727034678,"sku":"Mars-020","price":61.25,"currency_code":"USD","in_stock":true},{"title":"Ranger","offer_id":54415727067446,"sku":"Ranger-020","price":61.25,"currency_code":"USD","in_stock":true},{"title":"Race Plus","offer_id":54415727100214,"sku":"Race-020","price":48.75,"currency_code":"USD","in_stock":false},{"title":"Race Max","offer_id":54415727132982,"sku":"RaceM-020","price":48.75,"currency_code":"USD","in_stock":true},{"title":"Explore","offer_id":54415727165750,"sku":"Explore-020","price":48.75,"currency_code":"USD","in_stock":false},{"title":"Sola","offer_id":54415727198518,"sku":"Sola-020","price":43.75,"currency_code":"USD","in_stock":false},{"title":"Tyson","offer_id":54415727231286,"sku":"Tyson-020","price":48.75,"currency_code":"USD","in_stock":false},{"title":"Cityrun","offer_id":54415727264054,"sku":"Cityrun-020","price":48.75,"currency_code":"USD","in_stock":false},{"title":"Brawn","offer_id":54415727296822,"sku":"Brawn-020","price":48.75,"currency_code":"USD","in_stock":false},{"title":"Cityscape","offer_id":54415727329590,"sku":"Cityscape-020","price":39.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/2_9e26355d-bed3-428f-b545-3bc217ea71f3.jpg?v=1786905151"},{"product_id":"heybike-brake-lever","title":"Heybike Brake Lever","description":"\u003cp\u003eReplacement brake lever for Heybike commuter bikes. Levers snap in almost any tip-over, and a bent one that still works will usually have a cracked pivot you cannot see, so a straight replacement is safer than a bent original.\u003c\/p\u003e\u003cp\u003eThe clamp fits the stock handlebar diameter. Fitments are Cityscape, Mars, Explore, Ranger, Race Plus and Race Max; select your bike from the menu. Move the grip and any switch housing out of the way, slide the new lever on, and set it so your fingers rest on it naturally with a slight downward angle. Do not overtighten the clamp; a lever that can rotate a little on the bar survives the next fall better.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Cityscape","offer_id":54415730016566,"sku":"Cityscape-005","price":31.25,"currency_code":"USD","in_stock":false},{"title":"Mars","offer_id":54415730049334,"sku":"Mars-005","price":31.25,"currency_code":"USD","in_stock":false},{"title":"Explore","offer_id":54415730082102,"sku":"Explore-005","price":31.25,"currency_code":"USD","in_stock":true},{"title":"Ranger","offer_id":54415730114870,"sku":"Ranger-005","price":31.25,"currency_code":"USD","in_stock":false},{"title":"Race Plus","offer_id":54415730147638,"sku":"Race-005","price":31.25,"currency_code":"USD","in_stock":false},{"title":"Race Max","offer_id":54415730180406,"sku":"RaceM-005","price":31.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/1_82eba1fd-7b21-4e0e-bf71-a5467c9a6798.jpg?v=1786905172"},{"product_id":"heybike-gear-shifter","title":"Heybike Gear Shifter","description":"\u003cp\u003eHeybike's bar-mounted gear shifter, the handlebar control that selects gears. It replaces a shifter whose indexing has worn. Shifters that need two clicks to move one gear have usually worn their indexing detents, which is not something a cable adjustment fixes, so once it starts double-clicking this is the part to change rather than the cable.\u003c\/p\u003e\u003cp\u003eType is a bar-mounted shifter and mounting is a handlebar clamp. This listing does not carry a per-model fitment option, so match it against the shifter on your bike before ordering. Fitting means clamping it to the bar, threading the cable through and setting the indexing at the derailleur. Slide the grip off first, position the shifter where your thumb reaches it without moving your hand, and run through every gear on the stand before riding.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Default Title","offer_id":54415731818806,"sku":"EB-Derailleur","price":36.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/1_bbcc51bc-cbba-461f-b3bb-5e50b7194ab7.jpg?v=1786905181"},{"product_id":"heybike-handlebar-grips","title":"Heybike Handlebar Grips","description":"\u003cp\u003eA matched pair of replacement grips for Heybike e-bikes. Worn grips are the cheapest fix for the hand numbness and fatigue riders usually blame on the bars or the saddle. They replace grips that have gone hard, torn, or spun loose. Fitments cover the Race Max, Race Plus, Horizon, Cityrun, Cityscape, Mars, Mars 2.0, Ranger, Explore and Brawn.\u003c\/p\u003e\u003cp\u003eSold as a left and right pair in the stock bar diameter, so they go straight onto the existing bar. Select your bike from the Fits bike option. Fitting means removing the old grips, cleaning the bar so there is no residue, and working the new ones on fully so they sit against the bar ends. Once the right grip is on, check that nothing fouls the throttle's return before you ride. A grip that keeps spinning is usually on a dirty bar rather than the wrong size.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Race Max","offer_id":54415733096758,"sku":"RaceM-038","price":36.25,"currency_code":"USD","in_stock":true},{"title":"Horizon","offer_id":54415733129526,"sku":"Horizon-038","price":36.25,"currency_code":"USD","in_stock":true},{"title":"Cityrun","offer_id":54415733162294,"sku":"Cityrun-038","price":37.5,"currency_code":"USD","in_stock":true},{"title":"Cityscape","offer_id":54415733195062,"sku":"Cityscape-038","price":36.25,"currency_code":"USD","in_stock":true},{"title":"Mars","offer_id":54415733227830,"sku":"Mars-038","price":36.25,"currency_code":"USD","in_stock":true},{"title":"Ranger","offer_id":54415733260598,"sku":"Ranger-038","price":36.25,"currency_code":"USD","in_stock":false},{"title":"Explore","offer_id":54415733293366,"sku":"Explore-038","price":36.25,"currency_code":"USD","in_stock":false},{"title":"Race Plus","offer_id":54415733326134,"sku":"Race-038","price":36.25,"currency_code":"USD","in_stock":false},{"title":"Mars 2.0","offer_id":54415733358902,"sku":"Mars-038-2","price":36.25,"currency_code":"USD","in_stock":false},{"title":"Brawn","offer_id":54415733391670,"sku":"Brawn-038","price":37.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/1_82b8e234-76d0-4e56-9062-6d1fe6e83875.jpg?v=1786905188"},{"product_id":"heybike-pedal-set","title":"Heybike Pedal Set","description":"\u003cp\u003eA replacement pair of pedals for Heybike e-bikes. Platform pedals wear their grip pins smooth long before the bearings go, and slick pedals in the wet are worth fixing early. These replace a pair that has gone slippery, developed play, or been bent in a fall. Fitments cover the Horizon, Cityrun, Tyson, Cityscape, Race Max, Alpha, Brawn, Mars, Mars 2.0, Ranger, Ranger S and Explore.\u003c\/p\u003e\u003cp\u003eSold as a left and right pair with a standard thread. Select your bike from the Fits bike option. The left pedal is reverse-threaded, so check which pedal is which before you start and turn it the right way, or you will strip the crank arm. Grease the threads, tighten them firmly, and recheck after the first few rides. A pedal that creaks is usually a dry thread rather than a bad bearing.\u003c\/p\u003e","brand":"Heybike","offers":[{"title":"Horizon","offer_id":54415735980342,"sku":"Horizon-014","price":43.75,"currency_code":"USD","in_stock":true},{"title":"Cityrun","offer_id":54415736013110,"sku":"Cityrun-014","price":43.75,"currency_code":"USD","in_stock":true},{"title":"Tyson","offer_id":54415736045878,"sku":"tyson-014","price":37.5,"currency_code":"USD","in_stock":true},{"title":"Cityscape","offer_id":54415736078646,"sku":"Cityscape-014","price":37.5,"currency_code":"USD","in_stock":true},{"title":"Race Max","offer_id":54415736111414,"sku":"RaceM-014","price":37.5,"currency_code":"USD","in_stock":true},{"title":"Alpha","offer_id":54415736144182,"sku":"HB2ALPHA014USBK1","price":43.75,"currency_code":"USD","in_stock":true},{"title":"Brawn","offer_id":54415736176950,"sku":"Brawn-014","price":43.75,"currency_code":"USD","in_stock":false},{"title":"Mars","offer_id":54415736209718,"sku":"Mars-014","price":37.5,"currency_code":"USD","in_stock":false},{"title":"Ranger","offer_id":54415736242486,"sku":"Ranger-014","price":43.75,"currency_code":"USD","in_stock":false},{"title":"Explore","offer_id":54415736275254,"sku":"Explore-014","price":43.75,"currency_code":"USD","in_stock":false},{"title":"Mars 2.0","offer_id":54415736308022,"sku":"Mars-014-2","price":30.0,"currency_code":"USD","in_stock":false},{"title":"Ranger S","offer_id":54415736340790,"sku":"Rans-014","price":35.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/1_b486cc09-9344-4303-8b99-75f4720dc57e.jpg?v=1786905203"},{"product_id":"jfg-footpeg-fitfir-rawrr-mnatis","title":"Footpeg Fit RAWRR Mnatis 60V\/72V","description":"\u003cp\u003eMachined 6061 aluminum foot peg brackets for the Rawrr Mantis, in both 60V and 72V versions. They replace the weak cast OEM brackets and put a solid mount under your foot pegs, which is the point: eliminating foot peg failures.\u003c\/p\u003e\u003cp\u003eThe brackets are 6061 aluminum with a black anodized finish. They use the factory mounting hardware, so you do not need new bolts, and the install is a direct bolt-on. The package contents are as pictured; installation instructions are not included. Torque the stock bolts back down evenly and recheck them after the first ride, since pegs see a lot of load when you stand up.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"Black","offer_id":54475984142646,"sku":"A111431017","price":62.99,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":54475984175414,"sku":"A111431016","price":62.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/9e6810e7be0c7e1c9b6298822a999dc4.jpg?v=1787793657"},{"product_id":"jfg-handlebar-bag-fit-surron-talaria-sting","title":"Handlebar Bag Fit Sur-Ron Talaria Sting","description":"\u003cp\u003eA nylon handlebar bag for carrying tools on the Surron Light Bee X, Talaria Sting MX3, MX4 and MX5, and the Segway X260 and X160. It straps to the bar with universal buckles, so it goes on and comes off without tools and will also fit most other e-dirt-bike handlebars.\u003c\/p\u003e\u003cp\u003eThe bag is nylon that resists wear and dirt and is waterproof and dustproof. It is light. Sized for on-board tools such as wrenches, a tire repair kit and an inflator, it keeps those items in one place instead of rattling around a pocket. Mount it centered on the crossbar or bar pad area, and check that the buckles do not interfere with cable routing or lever travel at full lock.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"Default Title","offer_id":54427423834422,"sku":"A22110061","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/handlebar-bag-fit-surron-talaria-sting-1.jpg?v=1787145105"},{"product_id":"jfg-foot-pegs-fit-honda-surron-talaria","title":"Foot Pegs Fit Honda Sur-Ron Talaria","description":"\u003cp\u003eA pair of foot pegs for the Surron Light Bee X and the Talaria Sting MX3, MX4 and MX5. They replace the stock pegs and give your boots a stable platform, which helps balance and control over rough ground and in tight turns. The vendor also lists them for several Honda CRF and XR models.\u003c\/p\u003e\u003cp\u003eConstruction is 6061 aluminum alloy with stainless steel for strength in the high-wear areas. The design is lightweight, so it does not add to the bike. They mount to the stock peg brackets. If your pegs already feel loose, check the pivot pins and springs while you have things apart, because a new peg on a worn bracket still moves.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"Black","offer_id":54475984011574,"sku":"A1114021127","price":60.99,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":54475984044342,"sku":"A1114021122","price":60.99,"currency_code":"USD","in_stock":true},{"title":"Purple","offer_id":54475984077110,"sku":"A1114021129","price":60.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/foot-pegs-fit-honda-surron-talaria.jpg?v=1787793704"},{"product_id":"jfg-handlebar-riser-fit-talaria","title":"Handlebar Riser Fit Talaria Sting MX3 MX4","description":"\u003cp\u003eA handlebar riser for the Talaria Sting MX3 and Talaria Sting MX4. It installs between the triple clamp and the bar clamps and lifts the handlebar, which opens up the cockpit for taller riders and takes load off the arms and shoulders on long rides.\u003c\/p\u003e\u003cp\u003eThe riser is made from high-strength 7075 aluminum alloy with a black anodized finish for corrosion resistance. It allows adjustment of bar height and position, which also sharpens low-speed handling in technical sections. Before fitting, check that the brake hose, throttle cable and wiring have enough slack for the new bar height at full lock both ways.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"Default Title","offer_id":54427424391478,"sku":"A15112502","price":45.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/handlebar-riser-fit-talaria-sting-mx3-mx4-jfg-racing.jpg?v=1787145120"},{"product_id":"jfg-foot-pegs-fit-talaria","title":"Foot Pegs Fit Talaria X3 MX3 MX4 MX5","description":"\u003cp\u003eA pair of CNC-machined foot pegs for the Talaria Sting MX3, MX4 and MX5. They replace the stock pegs and use all of the original hardware, so the swap is bolt-off, bolt-on. The vendor also lists the Talaria X3.\u003c\/p\u003e\u003cp\u003eThe pegs are 6061 aluminum alloy, light and wear-resistant. The teeth are sharp and replaceable, and the modular design means you can pull and replace worn teeth instead of the whole peg. One pair is included, as pictured. Keep the stock pins, springs and clips when you remove the old pegs, since those are what hold the new ones on, and check the teeth for tightness now and then.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"Red","offer_id":54475985453366,"sku":"A111425102","price":55.99,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":54475985486134,"sku":"A111425107","price":55.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/foot-pegs-fit-talaria-x3-mx3-mx4-mx5-black.jpg?v=1787793712"},{"product_id":"jfg-talaria-sting-foot-pegs","title":"Foot Pegs Fit Talaria Sting MX3 MX4 MX5","description":"\u003cp\u003eA pair of foot pegs for the Talaria Sting MX3, Talaria Sting MX4 and Talaria Sting MX5. They are a direct stock replacement, fitting with your existing hardware, and are stiffer than the factory pegs if you ride standing up a lot.\u003c\/p\u003e\u003cp\u003eThe pegs are made entirely of 6061 aluminum and are precision-cast, which gives good support under aggressive off-road riding and resists bending or breaking. No modifications are needed; the pegs mount with the factory hardware. One pair is included as pictured. Compare the tooth profile against your boot soles; a cast peg with a fixed platform holds differently from one with replaceable pins.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"Default Title","offer_id":54427424686390,"sku":"A11142511","price":71.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/foot-pegs-fit-talaria-sting-mx3-mx4-mx5.jpg?v=1787145126"},{"product_id":"jfg-surron-pedal-connection-brackets","title":"Pedal Connection Brackets Fit Sur-Ron S X","description":"\u003cp\u003eA set of pedal (foot peg) connection brackets for the Surron Light Bee X. They replace the stock bracket links between the frame and pegs and are a step up in material: titanium alloy instead of the factory part.\u003c\/p\u003e\u003cp\u003eTitanium alloy keeps them light and strong. They are precision-machined for smooth movement and hard-anodized for wear and corrosion resistance. The design includes automatic position restoration, so the peg swings back into place after a hit instead of staying folded. They go on with the stock fasteners. Check that your foot peg springs are in good shape, because the spring is what returns the peg to position.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"Default Title","offer_id":54427426881846,"sku":"A11142040","price":107.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/pedal-connection-brackets-fit-surron-s-x.jpg?v=1787145153"},{"product_id":"jfg-foot-pegs-for-surron-honda","title":"Foot Pegs for Sur-Ron S\/X HONDA","description":"\u003cp\u003eA pair of forged foot pegs for the Surron Light Bee X. They replace the stock pegs with a wider, toothed platform that grips the sole of your boot. The vendor also lists them for several Honda CRF and XR models.\u003c\/p\u003e\u003cp\u003eThe body is forged T7 7075 aluminum, one of the highest-strength aluminum alloys. Each peg carries 16 reinforced teeth made from hardened steel, and a spare set of 304 stainless steel teeth is included for when the originals wear down. The teeth give an even, skid-resistant grip. They mount on the stock brackets. Keep the spare teeth in your toolbox and swap them in before the originals round off.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"Purple","offer_id":54475986633014,"sku":"A11142013","price":53.99,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":54475986665782,"sku":"A11142015","price":53.99,"currency_code":"USD","in_stock":true},{"title":"Gold","offer_id":54475986698550,"sku":"A11142011","price":53.99,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":54475986731318,"sku":"A11142017","price":53.99,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":54475986764086,"sku":"A11142010","price":53.99,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":54475986796854,"sku":"A11142009","price":53.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/foot-pegs-for-surron-s-x-honda-silver.jpg?v=1787793772"},{"product_id":"jfg-sur-ron-pedal-extension-bracket-kit","title":"Pedal Extension Bracket kit Fit Sur-Ron X S","description":"\u003cp\u003eA pedal extension bracket kit for the Surron Light Bee X. It extends the foot peg mounting position from the stock location, which changes where your feet sit on the bike when standing.\u003c\/p\u003e\u003cp\u003eThe brackets are 6061 aluminum in black, as pictured. The anodized surface is a durable color layer that resists fading and chipping, and the finish is finely frosted for a better tactile feel. Installation is non-destructive, so the bike goes back to stock if you change your mind. Confirm your bike is a Light Bee X before ordering, and reuse your existing foot pegs and springs on the new brackets.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"Default Title","offer_id":54427427012918,"sku":"A11142041","price":94.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/pedal-extension-bracket-kit-fit-sur-ron-x-s.jpg?v=1787145155"},{"product_id":"jfg-foot-pegs-bracket-link-for-talaria-sting","title":"Foot Pegs Bracket Link for Talaria Sting","description":"\u003cp\u003eA pair of foot peg bracket links for the Talaria Sting MX4 and Talaria Sting R. They are the pieces that connect the foot pegs to the frame, and this set replaces bent or cracked originals or upgrades them before they fail.\u003c\/p\u003e\u003cp\u003eThe links are aluminum alloy, strong yet light. They install simply and do not call for special tools. One pair of bracket links is included as pictured; installation instructions are not included. Look over your stock pegs and pins before ordering, since you will reuse them with these links, and torque the mounting bolts after the first few rides.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"Default Title","offer_id":54427430551862,"sku":"A11142038-D","price":41.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/foot-pegs-bracket-link-for-talaria-sting-jfg-racing-1.jpg?v=1787145166"},{"product_id":"jfg-foot-pegs-bracket-link-for-segway","title":"Foot Pegs Bracket Link for Segway X160 X260","description":"\u003cp\u003eA pair of foot peg bracket links for the Segway X160 and Segway X260. The bracket link is the arm between the frame mount and the foot peg. These replace the stock arms when they bend in a crash or when you want something sturdier under your feet.\u003c\/p\u003e\u003cp\u003eConstruction is aluminum alloy, which keeps the links strong and light and makes them a common pick among off-road riders. They bolt on in place of the originals with no special steps. The package includes one pair of bracket links as shown; installation instructions are not included. Your existing pegs, pins and springs carry over, so inspect those and recheck the bolts after the first ride.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"Default Title","offer_id":54427430584630,"sku":"A11142038-C","price":41.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/foot-pegs-bracket-link-for-segway-x160-x260-jfg-racing-2.jpg?v=1787145166"},{"product_id":"jfg-foot-pegs-bracket-link-for-e-ride-pro-ss","title":"Foot Pegs Bracket Link for E Ride Pro-SS","description":"\u003cp\u003eA set of foot peg bracket links for the E-Ride Pro SS. The link is the mount that holds each peg to the frame. This set swaps in for the stock links and gives you a cleaner, more rigid platform to stand on.\u003c\/p\u003e\u003cp\u003eThe links are aluminum alloy, lightweight and built to last through varied riding conditions. The design is sleek and modern, so it changes the look of the peg area as well as the function. They install with no modifications to the bike. One set of bracket links is included as pictured. Replace a tired peg spring while everything is apart, since the new link will not fix a peg that sags.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"Default Title","offer_id":54427430617398,"sku":"A11142038-A","price":41.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/foot-pegs-bracket-link-for-e-ride-pro-ss-jfg-racing-1.jpg?v=1787145167"},{"product_id":"jfg-rearview-mirror-for-surron-x-s-1","title":"Rearview Mirror for Sur-Ron Talaria Segway","description":"\u003cp\u003eA rearview mirror for the Surron Light Bee X, E-Ride Pro SS, Talaria Sting MX3, Talaria Sting MX4, Talaria XXX and the Segway X260 and X160. It mounts without taking the original side mirror position, so you can add it alongside a stock mirror or run it alone on a bike that has none.\u003c\/p\u003e\u003cp\u003eThe shell is 6061-T6 aluminum alloy, scratch-resistant, waterproof and corrosion-resistant. The lens is high-reflectivity glass for a clear, sharp view. The bracket rotates 360 degrees, so the mirror can be turned to clear blind spots. Position it where it does not hit the tank or lever at full lock, and snug the bracket bolt after you have checked the view from the seat.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"Red","offer_id":54475987026230,"sku":"A111520032","price":47.99,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":54475987058998,"sku":"A111520033","price":47.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/rearview-mirror-for-surron-talaria-segway-red.jpg?v=1787793797"},{"product_id":"jfg-handle-bar-riser-for-talaria-mx3-mx4","title":"Handle Bar Riser for Talaria MX3 MX4","description":"\u003cp\u003eA handlebar riser for the Talaria Sting MX3 and MX4. It raises the stock bar and lets you adjust its height and position, which changes your riding posture without buying a new bar.\u003c\/p\u003e\u003cp\u003eMaterial is premium 7075 aluminum in black. 7075 gives a high strength-to-weight ratio, so the riser stays rigid while adding little mass. Raising the bar helps reduce shoulder and arm fatigue on long rides and lets you find a comfortable setup for extended time in the saddle. Check cable and brake line slack at the new height before riding, and re-torque the bar clamp bolts in a cross pattern.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"Default Title","offer_id":54427432812854,"sku":"A15112501","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/handle-bar-riser-for-talaria-mx3-mx4.jpg?v=1787145202"},{"product_id":"jfg-foot-peg-support-brace-for-talaria-sting-mx3-mx4","title":"Foot Peg Support Brace for Talaria Sting MX3 MX4","description":"\u003cp\u003eA support brace for the foot peg area on the Talaria Sting MX3 and Talaria Sting MX4. It ties the peg mounts together to stiffen that section of the frame, so the pegs flex less under standing loads and the frame is protected from deformation.\u003c\/p\u003e\u003cp\u003eThe brace is 6061 aluminum and comes in silver or black as pictured; specify your color when ordering. Per the vendor it absorbs bumps and reduces sway at the pegs, which improves control and reduces fatigue on long rides. It bolts to the peg mounting points. Check that your peg brackets are straight before fitting, because a bent bracket will keep the brace from seating flat.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"Black","offer_id":54475990171958,"sku":"A112225047","price":62.99,"currency_code":"USD","in_stock":true},{"title":"Sliver","offer_id":54475990204726,"sku":"A112225046","price":62.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/foot-peg-support-brace-for-talaria-sting-mx3-mx4-jfg-racing-black.jpg?v=1787793894"},{"product_id":"jfg-foot-pegs-for-super-73-s1-s2","title":"Foot Pegs Aluminum for Super73 S1 S2","description":"\u003cp\u003eA pair of aluminum foot pegs for the Super73, listed by the vendor as a universal fit for the S1, S2, ZX and RX models. They give your feet a firm, grooved platform to rest on.\u003c\/p\u003e\u003cp\u003eThe pegs combine premium aluminum with iron for strength. The tread has an anti-slip groove pattern so boots stay put and you keep control. The anodized surface protects the pegs against weathering, wear and fading and gives them a clean look. Color is as shown in the pictures. Confirm your frame has the mount points for pegs before ordering, and check the fasteners after your first few rides.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"Silver","offer_id":54475991580982,"sku":"A111426036","price":36.99,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":54475991613750,"sku":"A111426037","price":36.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/foot-pegs-aluminum-for-super-73-s1-s2-jfg-racing-1.jpg?v=1787793916"},{"product_id":"jfg-foot-peg-spring-for-surron","title":"Foot Peg Spring for Sur-Ron","description":"\u003cp\u003eReplacement foot peg springs for the Surron Light Bee X and the Segway X260 and X160. The spring is the part that snaps a folding peg back into place, and it is the first thing to rust through or fly off on a trail. This kit puts a matching spring back in.\u003c\/p\u003e\u003cp\u003eThe springs are iron, made to match the original parts so they drop into the stock peg without fitting work. The kit includes the components needed for the replacement. Keep one in the bag as a backup for routine maintenance or a trail-side fix. When installing, note which way the stock spring leg sits against the bracket before you pull it, since getting the tail on the wrong side makes the peg flop.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"Default Title","offer_id":54427435991350,"sku":"A13112018","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/foot-peg-spring-for-surron-jfg-racing-1.jpg?v=1787145226"},{"product_id":"jfg-foot-pegs-for-super-74","title":"Foot Pegs for Super73 S1 S2 RX","description":"\u003cp\u003eA pair of foot pegs for the Super73 S1, S2 and RX. They bolt on with no modifications to the bike and give your boots a grooved, anti-slip surface to stand on.\u003c\/p\u003e\u003cp\u003eConstruction is aluminum and iron for durability. The anodized finish resists corrosion and will not fade. Installation is non-destructive: no drilling or cutting, so the bike can go back to stock. Color is as pictured. If you also ride a ZX, look at the other Super73 peg set in this range, which the vendor lists for that model. Recheck the fasteners after the first ride.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"Black","offer_id":54475992629558,"sku":"A11140098","price":64.99,"currency_code":"USD","in_stock":false},{"title":"Titanium","offer_id":54475992662326,"sku":"A11142601","price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/foot-pegs-for-super-73-s1-s2-rx-jfg-racing-1.jpg?v=1787793966"},{"product_id":"jfg-foot-pegs-bracket-link-for-sur-ron","title":"Foot Pegs Bracket Link for Sur-Ron S\/X","description":"\u003cp\u003eAluminum alloy bracket links for the Surron Light Bee X foot pegs. The link is the arm that holds the peg to the frame. A crash bends the link before it bends the peg, and this set lets you replace that arm instead of the whole peg assembly.\u003c\/p\u003e\u003cp\u003eThe links are aluminum alloy, which makes them stronger and lighter than the stock pieces, and they come fully equipped for fitting. Verify compatibility with your bike before ordering. They take the stock pegs, pins and springs. Inspect the frame mount tabs for cracks while the old link is off, since a hit hard enough to bend the link can stress the tab.\u003c\/p\u003e","brand":"JFG Racing","offers":[{"title":"Default Title","offer_id":54427436613942,"sku":"A11142038","price":41.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/files\/foot-pegs-bracket-link-for-sur-ron-s-x.jpg?v=1787145245"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3080\/9398\/collections\/mh-img-10.jpg?v=1786399631","url":"https:\/\/motorhabit.com\/collections\/controls\/fits-fgf3pm.oembed","provider":"MotorHabit","version":"1.0","type":"link"}